AsRock
TPU addict
- Joined
- Jun 23, 2007
- Messages
- 18,843 (3.08/day)
- Location
- UK\USA
Processor | AMD 3900X \ AMD 7700X |
---|---|
Motherboard | ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF |
Cooling | D15 |
Memory | Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB |
Video Card(s) | eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9 |
Storage | Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro |
Display(s) | Samsung 1080P \ LG 43UN700 |
Case | Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2 |
Audio Device(s) | Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti |
Power Supply | Seasonic Prime TX-750 \ Corsair RM1000X Shift |
Mouse | Steelseries Sensei wireless \ Steelseries Sensei wireless |
Keyboard | Logitech K120 \ Wooting Two HE |
Benchmark Scores | Meh benchmarks. |
Well picked these up some time ago, how ever finding they needed some TLC.
Ended up requiring
Re foaming after some body badly re-foamed them, had coil catching at high volumes.
Cleaning, cones are about as clean as i can get them
One of the boxes resealing due to bad shipping splitting the corner of one of the cabs ( need some thoughts on this ).
Pretty much done every thing that's been needed, i used super glue to seal the leaks from the split cabinet but wanted to take a little further by smoothing the outside with some filler.
Needs doing.
Removing the broken\loose particle board and replacing it, was thinking saw dust and glue although is some one knows some thing better let me know please.
All so thinking of recovering them too, Although i am after some good Vinyl Wrap, so if you know any were let me know.
Re-spaying the screws
Well here's some pictures.
Other threads
https://www.techpowerup.com/forums/threads/tannoy-mercury-mkii-revival.228159/#post-3726055
https://www.techpowerup.com/forums/threads/paradigm-5se-alterations.227929/
Ended up requiring
Re foaming after some body badly re-foamed them, had coil catching at high volumes.
Cleaning, cones are about as clean as i can get them
One of the boxes resealing due to bad shipping splitting the corner of one of the cabs ( need some thoughts on this ).
Pretty much done every thing that's been needed, i used super glue to seal the leaks from the split cabinet but wanted to take a little further by smoothing the outside with some filler.
Needs doing.
Removing the broken\loose particle board and replacing it, was thinking saw dust and glue although is some one knows some thing better let me know please.
All so thinking of recovering them too, Although i am after some good Vinyl Wrap, so if you know any were let me know.
Re-spaying the screws
Well here's some pictures.
Other threads
https://www.techpowerup.com/forums/threads/tannoy-mercury-mkii-revival.228159/#post-3726055
https://www.techpowerup.com/forums/threads/paradigm-5se-alterations.227929/
Last edited: