Naekuh
New Member
- Joined
- Apr 2, 2009
- Messages
- 503 (0.09/day)
- Location
- Miko Fox? Fire Miko? Its FireFox-Tan!
System Name | Nadeshiko |
---|---|
Processor | i7 980X @ 4.2ghz /w HT ON 24/7 |
Motherboard | eVGA Classified E759 |
Cooling | Custom H2o |
Memory | Corsair Dominators 6 x 2GB |
Video Card(s) | 2 x HD4870X2 in Xfire |
Storage | 3 x X-25V in Raid 0 (OS) + 3 x Raptors in Raid 0 (Game) |
Display(s) | Dual Gateway 2485 |
Case | MM U2 |
Audio Device(s) | Onboard |
Power Supply | Ultra 1.6KW |
Software | Win7 |
Speaking of. I'm going to have a 32nm chip soon. Do you have any recommendation of what the new "danger zones" are for OC voltages on this lower process?
Roughly..
No more then 1.4vcore Try to stay below it, however some oc's will require you to go tad above it.
Then:
No more then 1.375 VTT (absolutely MUST! do not venture off in the 1.4v unless u dont intend to keep that chip longer then 6-8months... possibly even shorte).
While holding the 2 above:
Keep your QPI link LOW... like 4.8mts low... gulftowns do not like a high qpi link.
My 24/7 settings are:
1.3875vcore
1.325 Vtt
1.325 QPI
1.65 Dram
This is holding 4.3ghz /w HT On.
This is on hexcore, the quadcores are easier to handle i heard.