• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Is this alright? [i7 4770k @ 4.5Ghz 1.3v 90c during high Intelburntest]

Joined
Dec 14, 2005
Messages
1,765 (0.26/day)
Location
Calverton, New York
System Name Current rig
Processor i9-9900k
Motherboard Z390 Aorus Xtreme
Cooling Corsair h150i Pro
Memory 32GB Ripjaws V 3200
Video Card(s) Asus 2090 ti Strix
Storage Samsung 970 Pro 1tb
Display(s) Alienware aw3418dw
Case Thermaltake View 91
Power Supply seasonic 1kw
Hey all. I just built a new rig and custom water cooling loop. I'm overclocking my 4770k but when I try anything other than intelburntest it stays at or below 72c. But when I try intelburntest it goes in to the low 90's on high and very high. Should I be worried? Why am I pulling some much heat when I have a 650 dollar custom loop setup? 45x100 1.3v vcore, 42x100 1.17 vring. 1.8v PLL or whatever that is, core input voltage or something? Any help would be appreciated
Also, AI SUITE 3 shows my temp getting to 77, not 90.
Untitled.jpg
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
IBT uses a new AVX instruction set that takes the CPU to a whole new level of heat! I would suggest not to run the proc at 90 for very long and move to something like Prime95 or the AIDA64 stability testing.

Also go with core temp...AI shows the socket temp from what I saw.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Why am I pulling some much heat when I have a 650 dollar custom loop setup?

Because you have a $650 water-cooling loop on an Intel APU.

Go by realtemp or try AIDA64 for temps. AIDA64 offers the most information, that I've seen.
 
Joined
Nov 5, 2013
Messages
32 (0.01/day)
How did you choose 1.3 vcore? Have you tested lower?

Some chips need higher, some lower.. i would test.. This would bring temps down.

4770K's run hot.. i lapped and delidded a couple and that helped tremendously. . The best method is trying to reduce voltages as much as you can..
 
Joined
Nov 30, 2007
Messages
215 (0.04/day)
Location
Croatia
System Name Cabal
Processor intel i9 9900k @ 5.0ghz 1.33v - cache @ 4.7ghz
Motherboard Asrock z370 fatal1ty gaming k6
Cooling Corsair H115i with 2x Corsair LL140mm rgb fans
Memory Corsair Dominator Platinum 32GB(4x8kit) ddr4 4000mhz@4100mhz
Video Card(s) Asus ROG Strix rtx3090 Gaming OC 24gb
Storage samsung evo 860 500gbx2, sandisk 3d ultra 500gbx2, kingston hyperX ssd 480gb, Seagate Barracuda3TB
Display(s) Asus ROG Swift pg278q G-Sync
Case Corsair 760t Graphite Series with 3x Corsair LL140mm fans
Audio Device(s) Sound Blaster X ae-5
Power Supply Corsair RM850i
Mouse Roccat Tyon
Keyboard Corsair RGB Strafe mechanical keyboard
Software win10pro 64bit
hi guys! i also have built a new and very similar rig(see sys specs) witH aio coolermaster prestige 240l water colling solution.
i currently oced 4770k to 4.5ghz usin 1.25v vcore, 1.15 cpu ring voltage, vrin to 1.8v, uncore multi x44 and all is fine but...temps are fine when gaming hard max at 65c but when i clock to 4.6(1.3vVcore) i can get to desktop and finish aida with very high max temps at 93c!!? and running 3dmark11 cpu physics test it freezes.
DDR ram voltage is deffo 1.65v xmp profile 1 for my 2x8gb kit kingston beast 2400mhz default freq and latencies.
TRYED HUNDREDS COMBINATIONS but no go for stable 4.6 ghz its tiring but ill figure it...
my last cpu was core 2 quad q9550 and that was a heaven for ocing from 2.8ghz to 3.8 on air WITH MAX TEMPS 65c..good old days
any advice would be great
 
Last edited:
Joined
May 19, 2007
Messages
4,520 (0.73/day)
Location
Perth AU
Processor Intel Core i9 10980XE @ 4.7Ghz 1.2v
Motherboard ASUS Rampage VI Extreme Omega
Cooling EK-Velocity D-RGB, EK-CoolStream PE 360, XSPC TX240 Ultrathin, EK X-RES 140 Revo D5 RGB PWM
Memory G.Skill Trident Z RGB F4-3000C14D 64GB
Video Card(s) Asus ROG Strix GeForce RTX 4090 OC WC
Storage M.2 990 Pro 1TB / 10TB WD RED Helium / 3x 860 2TB Evos
Display(s) Samsung Odyssey G7 28"
Case Corsair Obsidian 500D SE Modded
Power Supply Cooler Master V Series 1300W
Software Windows 11
Probably just poor contact in between the DIE and IHS so heat transfer wont be very good so your custom loop wont be able to cool the DIE correctly. if you do use AIDA64 and just do the FPU test you will even see higher temps as IBT is more of a bench test not a stress test.
 
Joined
Apr 10, 2012
Messages
1,400 (0.32/day)
Location
78°55' N, 11°56' E
System Name -aLiEn beaTs-
Processor Intel i7 11700kf @ 5.055Ghz
Motherboard MSI Z490 Unify
Cooling Corsair H115i Pro RGB
Memory G.skill Royal Silver 4400 cl17 @ 4403mhz
Video Card(s) Zotac GTX 980TI AMP!Omega Factory OC 1418MHz
Storage Intel SSD 330, Crucial SSD MX300 & MX500
Display(s) Samsung C24FG73 144HZ
Case CoolerMaster HAF 932 USB3.0
Audio Device(s) X-Fi Titanium HD @ 2.1 Bose acoustimass 5
Power Supply CoolerMaster 850W v2 gold atx 2.52
Mouse Razer viper 8k
Keyboard Logitech G19s
Software Windows 11 Pro 21h2 64Bit
Benchmark Scores ► ♪♫♪♩♬♫♪♭
Did you disable VR fault management?

Also try lower cache freq, maybe 41x @ 1.13v, LLC6, cpu current 120%. And do you really need 1.30v for 4.5Ghz?
 
Joined
Jul 18, 2007
Messages
2,693 (0.44/day)
System Name panda
Processor 6700k
Motherboard sabertooth s
Cooling raystorm block<black ice stealth 240 rad<ek dcc 18w 140 xres
Memory 32gb ripjaw v
Video Card(s) 290x gamer<ntzx g10<antec 920
Storage 950 pro 250gb boot 850 evo pr0n
Display(s) QX2710LED@110hz lg 27ud68p
Case 540 Air
Audio Device(s) nope
Power Supply 750w superflower
Mouse g502
Keyboard shine 3 with grey, black and red caps
Software win 10
Benchmark Scores http://hwbot.org/user/marsey99/
i need over 1.3vcore for 4.5ghz.

but i also run much cooler as mine is delidded so max i see at 4.5ghz is low 60s.
 
Joined
Feb 9, 2009
Messages
1,618 (0.29/day)
it's called burnintest for a reason, but i didnt know AVX was added... is there a way to turn that off? i used it for my OC stability testing, 5min crash meant 2hr crash in TF2 in my case, so i found it much faster than doing some 24h prime test
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
90°C is too much even for IBT.
1.3V is way over the line imo for this frequency. I know chips are different one from another, but this is just too much.
For example mine runs at tiny bit over 1.1V at 4.4GHz.
 
Joined
Jul 18, 2007
Messages
2,693 (0.44/day)
System Name panda
Processor 6700k
Motherboard sabertooth s
Cooling raystorm block<black ice stealth 240 rad<ek dcc 18w 140 xres
Memory 32gb ripjaw v
Video Card(s) 290x gamer<ntzx g10<antec 920
Storage 950 pro 250gb boot 850 evo pr0n
Display(s) QX2710LED@110hz lg 27ud68p
Case 540 Air
Audio Device(s) nope
Power Supply 750w superflower
Mouse g502
Keyboard shine 3 with grey, black and red caps
Software win 10
Benchmark Scores http://hwbot.org/user/marsey99/
90°C is too much even for IBT.
1.3V is way over the line imo for this frequency. I know chips are different one from another, but this is just too much.
For example mine runs at tiny bit over 1.1V at 4.4GHz.

congratz, you have a good chip.

some of us are not so lucky.

needs 1.38vcore for 100% stability.
 

Attachments

  • Capture.JPG
    Capture.JPG
    29.3 KB · Views: 898
Joined
Dec 14, 2006
Messages
536 (0.08/day)
System Name Ed-PC
Processor Intel i5-12600k
Motherboard Asus TUF Z690 PLUS Wifi D4
Cooling Noctua NH-14S
Memory Crucial Ballistix DDR4 C16@3600 16GB
Video Card(s) Nvidia MSI 970
Storage Samsung 980, 860evo
Case Lian Li Lancool II mesh Perf
Audio Device(s) onboard
Power Supply Corsair RM750x
Software Win10 Pro 64bit
OCCT has AVX option on its linpack test , with LinX and IBT I think you have to use older version with no AVX support .
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
Or you can use Prime95, which supports all these latest instructions for a long time.
 

MxPhenom 216

ASIC Engineer
Joined
Aug 31, 2010
Messages
12,944 (2.61/day)
Location
Loveland, CO
System Name Ryzen Reflection
Processor AMD Ryzen 9 5900x
Motherboard Gigabyte X570S Aorus Master
Cooling 2x EK PE360 | TechN AM4 AMD Block Black | EK Quantum Vector Trinity GPU Nickel + Plexi
Memory Teamgroup T-Force Xtreem 2x16GB B-Die 3600 @ 14-14-14-28-42-288-2T 1.45v
Video Card(s) Zotac AMP HoloBlack RTX 3080Ti 12G | 950mV 1950Mhz
Storage WD SN850 500GB (OS) | Samsung 980 Pro 1TB (Games_1) | Samsung 970 Evo 1TB (Games_2)
Display(s) Asus XG27AQM 240Hz G-Sync Fast-IPS | Gigabyte M27Q-P 165Hz 1440P IPS | Asus 24" IPS (portrait mode)
Case Lian Li PC-011D XL | Custom cables by Cablemodz
Audio Device(s) FiiO K7 | Sennheiser HD650 + Beyerdynamic FOX Mic
Power Supply Seasonic Prime Ultra Platinum 850
Mouse Razer Viper v2 Pro
Keyboard Razer Huntsman Tournament Edition
Software Windows 11 Pro 64-Bit
Or you can use Prime95, which supports all these latest instructions for a long time.

No it hasn't. At least not AVX2 which is the new instruction on Haswell. Also Prime95 takes way to long to get any usable information out of it in terms of system stability.

OP do like Cadaveca said, use AIDA for testing Haswell. He easily has more Knowledge on Haswell then anyone else who has replied in this thread.
 
Joined
May 19, 2007
Messages
4,520 (0.73/day)
Location
Perth AU
Processor Intel Core i9 10980XE @ 4.7Ghz 1.2v
Motherboard ASUS Rampage VI Extreme Omega
Cooling EK-Velocity D-RGB, EK-CoolStream PE 360, XSPC TX240 Ultrathin, EK X-RES 140 Revo D5 RGB PWM
Memory G.Skill Trident Z RGB F4-3000C14D 64GB
Video Card(s) Asus ROG Strix GeForce RTX 4090 OC WC
Storage M.2 990 Pro 1TB / 10TB WD RED Helium / 3x 860 2TB Evos
Display(s) Samsung Odyssey G7 28"
Case Corsair Obsidian 500D SE Modded
Power Supply Cooler Master V Series 1300W
Software Windows 11
No it hasn't. At least not AVX2 which is the new instruction on Haswell. Also Prime95 takes way to long to get any usable information out of it in terms of system stability.

OP do like Cadaveca said, use AIDA for testing Haswell. He easily has more Knowledge on Haswell then anyone else who has replied in this thread.

Or use Asus real bench that what i normally do and set the stress test on loop leave it going for a few hours.
 
Joined
Jan 17, 2010
Messages
12,280 (2.37/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
Intel Burn test gets too hot. Dont use it
 
Joined
Dec 14, 2006
Messages
536 (0.08/day)
System Name Ed-PC
Processor Intel i5-12600k
Motherboard Asus TUF Z690 PLUS Wifi D4
Cooling Noctua NH-14S
Memory Crucial Ballistix DDR4 C16@3600 16GB
Video Card(s) Nvidia MSI 970
Storage Samsung 980, 860evo
Case Lian Li Lancool II mesh Perf
Audio Device(s) onboard
Power Supply Corsair RM750x
Software Win10 Pro 64bit
The problem with Haswell is if you do test with AVX the voltage goes up more than in the i5-35xx/i7-37xx so heat goes way up . Even with Ivy they get pretty hot with AVX enabled .

Only issue with AIDA , is seems it can pass stable in that but not stable in other apps , which is always a possibility even testing in Prime95/Linpack .

[H]OCP ran into this when first testing haswell , in one of there reviews .
 
Joined
May 19, 2007
Messages
4,520 (0.73/day)
Location
Perth AU
Processor Intel Core i9 10980XE @ 4.7Ghz 1.2v
Motherboard ASUS Rampage VI Extreme Omega
Cooling EK-Velocity D-RGB, EK-CoolStream PE 360, XSPC TX240 Ultrathin, EK X-RES 140 Revo D5 RGB PWM
Memory G.Skill Trident Z RGB F4-3000C14D 64GB
Video Card(s) Asus ROG Strix GeForce RTX 4090 OC WC
Storage M.2 990 Pro 1TB / 10TB WD RED Helium / 3x 860 2TB Evos
Display(s) Samsung Odyssey G7 28"
Case Corsair Obsidian 500D SE Modded
Power Supply Cooler Master V Series 1300W
Software Windows 11
Just use real bench and be done with it its all you need.
 
Joined
Aug 13, 2009
Messages
3,187 (0.60/day)
Location
Czech republic
Processor Ryzen 5800X
Motherboard Asus TUF-Gaming B550-Plus
Cooling Noctua NH-U14S
Memory 32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC
Video Card(s) Sapphire Radeon Rx 580 Nitro+ 8GB
Storage HP EX950 512GB + Samsung 970 PRO 1TB
Display(s) HP Z Display Z24i G2
Case Fractal Design Define R6 Black
Audio Device(s) Creative Sound Blaster AE-5
Power Supply Seasonic PRIME Ultra 650W Gold
Mouse Roccat Kone AIMO Remastered
Software Windows 10 x64
No it hasn't. At least not AVX2 which is the new instruction on Haswell. Also Prime95 takes way to long to get any usable information out of it in terms of system stability.

OP do like Cadaveca said, use AIDA for testing Haswell. He easily has more Knowledge on Haswell then anyone else who has replied in this thread.
You're right about Haswell. That's currently in some test builds only. Normal AVX is supported just fine though.
 
Joined
Apr 10, 2012
Messages
1,400 (0.32/day)
Location
78°55' N, 11°56' E
System Name -aLiEn beaTs-
Processor Intel i7 11700kf @ 5.055Ghz
Motherboard MSI Z490 Unify
Cooling Corsair H115i Pro RGB
Memory G.skill Royal Silver 4400 cl17 @ 4403mhz
Video Card(s) Zotac GTX 980TI AMP!Omega Factory OC 1418MHz
Storage Intel SSD 330, Crucial SSD MX300 & MX500
Display(s) Samsung C24FG73 144HZ
Case CoolerMaster HAF 932 USB3.0
Audio Device(s) X-Fi Titanium HD @ 2.1 Bose acoustimass 5
Power Supply CoolerMaster 850W v2 gold atx 2.52
Mouse Razer viper 8k
Keyboard Logitech G19s
Software Windows 11 Pro 21h2 64Bit
Benchmark Scores ► ♪♫♪♩♬♫♪♭
The problem with Haswell is if you do test with AVX the voltage goes up more than in the i5-35xx/i7-37xx so heat goes way up . Even with Ivy they get pretty hot with AVX enabled .

Only issue with AIDA , is seems it can pass stable in that but not stable in other apps , which is always a possibility even testing in Prime95/Linpack .

[H]OCP ran into this when first testing haswell , in one of there reviews .
That only happens if you use auto voltage which uses offset or adaptive voltage.

By fixed 1.30v it will be fixed 1.30 even by those avx2 apps, btw aida64 raises the voltage as well, not just by fpu.:)
 
Joined
Dec 14, 2006
Messages
536 (0.08/day)
System Name Ed-PC
Processor Intel i5-12600k
Motherboard Asus TUF Z690 PLUS Wifi D4
Cooling Noctua NH-14S
Memory Crucial Ballistix DDR4 C16@3600 16GB
Video Card(s) Nvidia MSI 970
Storage Samsung 980, 860evo
Case Lian Li Lancool II mesh Perf
Audio Device(s) onboard
Power Supply Corsair RM750x
Software Win10 Pro 64bit
That only happens if you use auto voltage which uses offset or adaptive voltage.

By fixed 1.30v it will be fixed 1.30 even by those avx2 apps, btw aida64 raises the voltage as well, not just by fpu.:)
Sure , but many don't use fixed (especially if its stock) and most want offset for 24/7 use , but yes fixed will of course give fixed voltage all time no matter load :D

Here link from HOCP on AIDA with stability . (read down last part of page)

http://www.hardocp.com/article/2013...74770k_ipc_overclocking_review/7#.Uq8t605QalY
 
Last edited:
Joined
Apr 10, 2012
Messages
1,400 (0.32/day)
Location
78°55' N, 11°56' E
System Name -aLiEn beaTs-
Processor Intel i7 11700kf @ 5.055Ghz
Motherboard MSI Z490 Unify
Cooling Corsair H115i Pro RGB
Memory G.skill Royal Silver 4400 cl17 @ 4403mhz
Video Card(s) Zotac GTX 980TI AMP!Omega Factory OC 1418MHz
Storage Intel SSD 330, Crucial SSD MX300 & MX500
Display(s) Samsung C24FG73 144HZ
Case CoolerMaster HAF 932 USB3.0
Audio Device(s) X-Fi Titanium HD @ 2.1 Bose acoustimass 5
Power Supply CoolerMaster 850W v2 gold atx 2.52
Mouse Razer viper 8k
Keyboard Logitech G19s
Software Windows 11 Pro 21h2 64Bit
Benchmark Scores ► ♪♫♪♩♬♫♪♭
I mean if you test such apps then test with fixed voltage, otherwise yes use adaptive and dont run such tests since it spikes +0.09v.

x264 encoders have occasional spikes as well, but it wont heat that bad..


Im also at adaptive, i think its the best setting ever, atm in idle :)
 
Last edited:
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
When stability testing a new core clock with Aida, stock ram, should I run memory testing or just cpu? After removing my ram overclock I am able to hit new levels of multiplier, currently exploring voltages for 46-48x... It seems to need between 1.25 and 1.35 core voltage for this range. I don't want to kill my ram testing the chip etc.

Also aida crashed last night, but kept running stability tests somehow because the cores were fully loaded and hot until I rebooted this morning when I woke up. I might stick to XTU and Prime95.
 
Joined
May 19, 2007
Messages
4,520 (0.73/day)
Location
Perth AU
Processor Intel Core i9 10980XE @ 4.7Ghz 1.2v
Motherboard ASUS Rampage VI Extreme Omega
Cooling EK-Velocity D-RGB, EK-CoolStream PE 360, XSPC TX240 Ultrathin, EK X-RES 140 Revo D5 RGB PWM
Memory G.Skill Trident Z RGB F4-3000C14D 64GB
Video Card(s) Asus ROG Strix GeForce RTX 4090 OC WC
Storage M.2 990 Pro 1TB / 10TB WD RED Helium / 3x 860 2TB Evos
Display(s) Samsung Odyssey G7 28"
Case Corsair Obsidian 500D SE Modded
Power Supply Cooler Master V Series 1300W
Software Windows 11
I mean if you test such apps then test with fixed voltage, otherwise yes use adaptive and dont run such tests since it spikes +0.09v.

x264 encoders have occasional spikes as well, but it wont heat that bad..


Im also at adaptive, i think its the best setting ever, atm in idle :)

Whats the ambient temp for my chip to run that cool its needs to be below 25c.
 
Joined
Apr 10, 2012
Messages
1,400 (0.32/day)
Location
78°55' N, 11°56' E
System Name -aLiEn beaTs-
Processor Intel i7 11700kf @ 5.055Ghz
Motherboard MSI Z490 Unify
Cooling Corsair H115i Pro RGB
Memory G.skill Royal Silver 4400 cl17 @ 4403mhz
Video Card(s) Zotac GTX 980TI AMP!Omega Factory OC 1418MHz
Storage Intel SSD 330, Crucial SSD MX300 & MX500
Display(s) Samsung C24FG73 144HZ
Case CoolerMaster HAF 932 USB3.0
Audio Device(s) X-Fi Titanium HD @ 2.1 Bose acoustimass 5
Power Supply CoolerMaster 850W v2 gold atx 2.52
Mouse Razer viper 8k
Keyboard Logitech G19s
Software Windows 11 Pro 21h2 64Bit
Benchmark Scores ► ♪♫♪♩♬♫♪♭
idk 19-22C? Its winter here (atm -2C), I have a small central heating radiator in the room but its not opened to the max..


lol one time i had balcony door open for 1-2 min was gonna go on smoke outside and temps dropped to 10-13C across all 4 cores



EDIT: but there is one thing, if i disable c-states it will be in 30-34C area, 0.7v 800mhz vs 23-27C..
 
Last edited:
Top