Jr's and cdawall's Low Cache OC'ing Club

[JrRacinFan]

those are some good clockers.(well alot of them are) Brisbane is AM2 bro. Venice is single core 939

See that's where I lack knowledge is S939 and S754. Would you consider to let him join p_o_s?

 

[p_o_s_pc]

See that's where I lack knowledge is S939 and S754. Would you consider to let him join p_o_s?

considering the S939 3800 is about equal to the AM2 3600 and 3800 i would let him join if he has it clocked to a reasonable level(2.7+) but because of the DDR ram it may slow it down some.

@JR
BTW my old gigabyte board lives and now i have it set up and working even a slight overclock. check out the specs for "resurrection" in my specs

 

[JrRacinFan]

considering the S939 3800 is about equal to the AM2 3600 and 3800 i would let him join if he has it clocked to a reasonable level(2.7+) but because of the DDR ram it may slow it down some.

@ Flyordie

With that being said. Post a CPUz and SuperPI 1M

 

[cdawall]

 

[p_o_s_pc]

here is Super PI with my 5kBE and the Gigabyte board that came back from the dead

EDIT i forgot the ram speed can i just post a SS of CPU-Z?

 

[Flyordie]

those are some good clockers.(well alot of them are)




Brisbane is AM2 bro. Venice is single core 939

Yes, my X2 Toledo will do 3.2Ghz on 1.45V ;-) but on this board it caps out at 2.74Ghz.
(will edit in my scores in a few, my ICS chip is overheating causing my OC to drop to 2,680Mhz (FSB is set to 280Mhz)

 

[JrRacinFan]

EDIT i forgot the ram speed can i just post a SS of CPU-Z?

If you want to, you can do a CPUz + Memset SS.

@Flyordie
Nice clocks!

 

[Flyordie]

http://valid.canardpc.com/show_oc.php?id=457760 <-- Thats its current stable speed so will do it at that speed. ;-)

 

[p_o_s_pc]

If you want to, you can do a CPUz + Memset SS.

@Flyordie
Nice clocks!

Ok thanks for not having me run super PI again. I will post them here in few.

 

[flyin15sec]

Guess I'll post what I've done:
E2180
EVGA 650i Ultra

Unfortunately I'm using the what appears to be the wrong SuperPi. More to come once I get benchmarks done. And get ths system back up to 3.6ghz, it's been detune to only 3.33ghz.

 

[p_o_s_pc]

JR i don't have memset installed on this rig and it takes about 5mins for this rig to restart so here is a CPU-Z link and SS
http://valid.canardpc.com/show_oc.php?id=457766

 

[3870x2]

I also have a PD i wouldnt mind posting, an 830 to be exact. You do know that a PD is dual core? im sure you knew that
other than catche and instructions, the only difference is the 2 cores on 2 chips(C2D), rather than 2 cores on 1 chip(D)

 

[Flyordie]

 

[p_o_s_pc]

here is my Wprime with my 4850e if i didn't post it already

 

[JrRacinFan]

@Everyone
Post #2 updated

I also have a PD i wouldnt mind posting, an 830 to be exact. You do know that a PD is dual core? im sure you knew that
other than catche and instructions, the only difference is the 2 cores on 2 chips(C2D), rather than 2 cores on 1 chip(D)

How much cache is on-die? I won't be able to add your results but if you like you can post them here! It would help other members trying to tweak out the goods.

Thanks!

@flyin15sec
Think you may be able to squeeze a little more performance out of your ram with tighter timings? Maybe 5-4-4-13?

@Flyordie
Can you submit a Memory tab ss from CPUz for me please. Thanx!

@p_o_s
Would you like me to include that run in post 2?

 

[p_o_s_pc]

@Everyone
Post #2 updated



How much cache is on-die? I won't be able to add your results but if you like you can post them here! It would help other members trying to tweak out the goods.

Thanks!

@flyin15sec
Think you may be able to squeeze a little more performance out of your ram with tighter timings? Maybe 5-4-4-13?

@Flyordie
Can you submit a Memory tab ss from CPUz for me please. Thanx!

@p_o_s
Would you like me to include that run in post 2?

Yes please. The PD 830 has 2MB L2 (1mb per core)

 

[JrRacinFan]

Yes please. The PD 830 has 2MB L2 (1mb per core)

OK well I am leaving it up to you pos, if he posts results should I add it to post 2?

 

[p_o_s_pc]

OK well I am leaving it up to you pos, if he posts results should I add it to post 2?

I would add them considering that the Pentium D was Intels comp. for The Anthlon X2 BUT on the other hand i am saying NO DON'T post becase the Pentium D is based on the P4 and this thread is about the Core 2s and Anthlon X2s

i want to see a Pd in action haven't seen there numbers in along time.

BTW you didn't put the super PI time for the 5kBE 27.891

 

[Flyordie]

 

[JrRacinFan]

Post 2 updated (again)
Like the new look guys?

@p_o_s
I could add non-member settings to post #2. Think that would be cool? Please guys if you don't mind could you try to stick with Generic CPU bench?

 

[Flyordie]

CPU-Z is bugged. My real voltage is 1.35V (set in BIOS). The formula used for the sensor is wrong. Should I post a bug report for it? lol.

 

[p_o_s_pc]

Post 2 updated (again)
Like the new look guys?

@p_o_s
I could add non-member settings to post #2. Think that would be cool? Please guys if you don't mind could you try to stick with Generic CPU bench?

yea that would be cool. BTW could you link me to the Generic CPU bench i want to run it on my 5kBE

 

[JrRacinFan]

CPU-Z is bugged. My real voltage is 1.35V (set in BIOS). The formula used for the sensor is wrong. Should I post a bug report for it? lol.

**sighs** Should've told me sooner.....

Post 2 updated (yet again)

 

[p_o_s_pc]

5kBE@3.2ghz

BTW does anyone know what would cause a board to stop working then a few months later start working again and run like normal?

 

[cdawall]

celeron 430 on its way to me