• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Lamptron FC-2 Fan Controller Aesthetic Mod

Joined
Apr 24, 2009
Messages
126 (0.02/day)
IKIKUINTHENUTZ here with a new completed mod

Lamptron FC-2 fan controller mod
MFG Product Link

I introduce my latest modification, my LED switch out and how to fix the not fully lid LED lights on the sides of the unit.

For those of you who don't know, this fan controller has an aesthetic problem of having the LEDs not show up in the corners. Below here is a Image I borrowed from overclock3d.com

As you can see, the unit uses bright blue LEDs and doesn't fully illuminate the unit at the edges.

When I bought my black colored FC-2 from performance-pcs
http://www.performance-pcs.com/cata...t_info&manufacturers_id=158&products_id=24896
I was thinking that my LEDs were too bright and I wasn't too fond of blue and so I decided to switch it out.

My original idea when I started with this project was to switch out the blue LEDs in favor for white LEDs, however during the process I learned some important facts and then I decided to fix the non side illumination issue along with switching out the LEDs.

First I unscrewed the whole unit apart


After doing that I decided to inspect the unit and I noticed this


If Lamptron indeed put a led on the sides, then why doesn't it show? I quickly plugged it in and I decided to look at the back of the unit while I was turning the knobs, indeed it lit up perfectly fine but why doesn't it show? The image below practically shows why, a piece of metal blocks the way.


Another shot of the unit with the metal off


While searching the internet for the LEDs, it was pita finding them in size of 2X5X6mm flat rectangular white leds so I decided to get these white 2X5X7mm from ebay
link

After I received them, it took 6 hours total to solder the old ones out and put in the new ones with just a soldering iron. My end result was worth it because it came out to be not too bright or blue.

Perfect


Now for the piece of metal, I went to my local hardware store and bought a brand new Dremel and a miniature hobby table so I can cut the little darn thing. Luckily with purchase of a new Dremel, they give you a sample cutting disk and grinding disk inside the box. I didn't have to spend extra money for more tools.

After cutting the edges off and grinding 1mm all around the openings to accommodate the new bigger LEDs, this was my end result. It's not perfect but it's well hidden anyways when it's put back together. This took me around 15 minutes to do.


Now the finished product images.



That's all :rockout:
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
Wow that looks way cooler than originally manufactured, very nice job mate!
 
Joined
Jul 1, 2005
Messages
5,197 (0.76/day)
Location
Kansas City, KS
System Name Dell XPS 15 9560
Processor I7-7700HQ
Memory 32GB DDR4
Video Card(s) GTX 1050/1080 Ti
Storage 1TB SSD
Display(s) 2x Dell P2715Q/4k Internal
Case Razer Core
Audio Device(s) Creative E5/Objective 2 Amp/Senn HD650
Mouse Logitech Proteus Core
Keyboard Logitech G910
You need a third LED above the arc.

And then adjust the brightness for all 3 so they look like dials :D

Turn one more to the right, and it "fills in" the glow. btw, a tripod will make dark shots SOOOOO much easier with a rebel :D
 
Joined
Nov 26, 2008
Messages
4,251 (0.76/day)
Location
California
System Name New Build - Oct. 2021
Processor Intel i7 10700k
Motherboard Asus TUF Gaming H570-PRO
Cooling Corsair H100i
Memory Corsair Vengence 16gb 3600 mhz
Video Card(s) Gigabyte RTX 3060ti 8gb
Storage 1Tb Samsung 970 EVO NvMe m.2
Display(s) 27" LG Ultragear 144hz
Case Fractal Design- Meshify 2
Audio Device(s) Onborad dts
Power Supply Corsair RX 650 W
Mouse Roccat Kiro
Keyboard Razer Tarantula
Software Windows 10 Home x64
Nice mod! Replacing leds can be a pain in the ass, so I say a job well done:cool:
 
Joined
Apr 24, 2009
Messages
126 (0.02/day)
Ok guys time for part 2 and I'm going to need your help. I have been experimenting with diffusion and so far I'm having difficulty of which one to pick.
 

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
I like the first one the most.
 

CyberDruid

New Member
Joined
Sep 23, 2007
Messages
2,887 (0.48/day)
Location
On top of a mountain
System Name Shop Dog
Processor E8400
Motherboard Asus Blitz Formula SE
Cooling d-Tek FuZion
Memory 2 x 2GB DDR2 800 G Skill
Video Card(s) EVGA 7900 GTX
Storage 150GB VelociRaptor
Display(s) Acer 21.5 1080p LED Back Lit Monitor
Case Working on it
Audio Device(s) PCI SoundMax
Power Supply Silverstone 750 Modular
Software XP Pro SP2
Benchmark Scores Super Pi 11.56s 1M at 4050mhz
Last one best. Neat mod.
 
Joined
Apr 24, 2009
Messages
126 (0.02/day)
Alright everyone, thanks for your inputs. After collecting opinions on many forums, the last one definitely was the winner.

But lets go into detail of what I did shall we?

I was talking to nd4spdbh2 of OCF and he had given me an idea of how much light was bleeding out on to the back of the unit which was shown in my image. We talked about how to address it and then came up the idea of aluminum foil behind each led.

Now ill be honest, working with small bits of aluminum and then gluing it on a slippery surface in the smallest work space available with 2 needles as tool is worth a lot of headaches but in the end, it worked out fine in the end.



This resulted what I wanted, stronger front led lighting but what I didn't expect was the fact that it was too much, it was too damn bright just like Sunbeam Controllers! Ouch!

After consulting with nd4spdbh2 again and seeing forums posts, I noticed people complained about how the lighting wasn't all around in a circle. The idea of diffusing the light came apparent.

The installation is probably the most easiest mod I have done to this unit. All you need is some type of paper that still let light through, some glue, and a razor. In this case I used parchment silicone paper that is used in baking.

Unscrew the face plate and slap the paper on with some glue


Then use a razor and cut holes where appropriate for the knobs and screws.


Then put everything back together and huzzah! Finished!
 

CyberDruid

New Member
Joined
Sep 23, 2007
Messages
2,887 (0.48/day)
Location
On top of a mountain
System Name Shop Dog
Processor E8400
Motherboard Asus Blitz Formula SE
Cooling d-Tek FuZion
Memory 2 x 2GB DDR2 800 G Skill
Video Card(s) EVGA 7900 GTX
Storage 150GB VelociRaptor
Display(s) Acer 21.5 1080p LED Back Lit Monitor
Case Working on it
Audio Device(s) PCI SoundMax
Power Supply Silverstone 750 Modular
Software XP Pro SP2
Benchmark Scores Super Pi 11.56s 1M at 4050mhz
Paper has been a much neglected material for case lighting. Kudos:respect:

Mini reflectors on the LEDs...this log shows that it's not what so much as how that really shows true modding spirit. Loving it :rockout:
 
Joined
Mar 6, 2009
Messages
5,976 (1.09/day)
Location
Cybertron aka Canada
Processor Intel Core i5-3570K
Motherboard Asus P8Z77-V Pro
Cooling Noctua NH-D14
Memory 8GB Mushkin Blackline DDR3-1600
Video Card(s) Gigabyte GTX 670
Storage Intel 520 60GB, Seagate Barracuda XT 2TB
Display(s) BenQ 24" XL2420T
Case Corsair 550D
Audio Device(s) Sennheiser HD600, Audeze LCD-3F, Mytek Stereo 192 DSD, La Figaro 339, Burson HA-160, Geek Pulse X
Power Supply Corsair AX650
Mouse steelseries Sensei MLG edition
Keyboard Cooler Master QuickFire Pro
Software Windows 7 64-bit Home Premium
nice modification, clever trick with the paper. I know the LED are connected to the rheostat so when you turn them the LED acts as a indicator but I would of liked Lamptron to put some kind of engraved or sticker marker like the Sunbeam Rheobus instead of guessing 2:00 position gets me x volts etc.
 
Joined
Jul 3, 2007
Messages
1,317 (0.22/day)
Location
New Zealand
Processor AMD Phenom II 555BE unlocked X4 @3.8GHz
Motherboard GA-78LMT-S2P
Cooling Thermaltake Blue Orb + open case in cold room = low temps lol
Memory 8Gb DDR3 1600
Video Card(s) GTX580
Storage 64GB SSD Super Talent
Display(s) 22" Chimei, 17" Philips
Case POS!
Power Supply Cooler Master Silent Pro Gold 800W
you know what would be really cool would be to have colored lights and the color change from green-yellow-orange-red as you turn the knob. pretty complicated but would be awesome. i'm thinking this in a more general sense not necessarily for this mod.
 
Joined
Mar 6, 2009
Messages
5,976 (1.09/day)
Location
Cybertron aka Canada
Processor Intel Core i5-3570K
Motherboard Asus P8Z77-V Pro
Cooling Noctua NH-D14
Memory 8GB Mushkin Blackline DDR3-1600
Video Card(s) Gigabyte GTX 670
Storage Intel 520 60GB, Seagate Barracuda XT 2TB
Display(s) BenQ 24" XL2420T
Case Corsair 550D
Audio Device(s) Sennheiser HD600, Audeze LCD-3F, Mytek Stereo 192 DSD, La Figaro 339, Burson HA-160, Geek Pulse X
Power Supply Corsair AX650
Mouse steelseries Sensei MLG edition
Keyboard Cooler Master QuickFire Pro
Software Windows 7 64-bit Home Premium
how sensitive is the rheostat what clock position does the fan start increasing voltage.
 
Joined
Apr 24, 2009
Messages
126 (0.02/day)
how sensitive is the rheostat what clock position does the fan start increasing voltage.

It varies between fans. Some fans start at 5v, some start at 6v hell I know some that dont start till 9v. Gotta check the voltage range on the fans.
 
Joined
May 4, 2007
Messages
2,165 (0.35/day)
Location
Wallingford, CT
Processor Intel i7-5930k
Motherboard ASRock Taichi X99
Cooling Phanteks PH-TC14PE
Memory 4x8GB HyperX FURY DDR4-2666 15-17-17-15
Video Card(s) MSI GTX 1070 Gaming X 8G
Storage 1x Plextor PX-512M6S SSD, 1x WD 750gb HDD, 2x Hitachi 2TB HDD, 1x Seagate 4TB HDD
Display(s) 2x Dell P2314H
Case Fractal Define R4
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse ROCCAT Kone Pure Color White
Keyboard Corsair K95 RGB - Cherry MX Brown
Software Windows 10 Professional x64
Awesome mod! Such a simple device but you made it look great!
 
Joined
Mar 6, 2009
Messages
5,976 (1.09/day)
Location
Cybertron aka Canada
Processor Intel Core i5-3570K
Motherboard Asus P8Z77-V Pro
Cooling Noctua NH-D14
Memory 8GB Mushkin Blackline DDR3-1600
Video Card(s) Gigabyte GTX 670
Storage Intel 520 60GB, Seagate Barracuda XT 2TB
Display(s) BenQ 24" XL2420T
Case Corsair 550D
Audio Device(s) Sennheiser HD600, Audeze LCD-3F, Mytek Stereo 192 DSD, La Figaro 339, Burson HA-160, Geek Pulse X
Power Supply Corsair AX650
Mouse steelseries Sensei MLG edition
Keyboard Cooler Master QuickFire Pro
Software Windows 7 64-bit Home Premium
It varies between fans. Some fans start at 5v, some start at 6v hell I know some that dont start till 9v. Gotta check the voltage range on the fans.

I know fans have different starting voltage what I mean is, is there an average clock position a standard 5v fan starts at for example the Sunbeam Rheobus generally doesn't start moving until the 12:00pm position so it's easy to distinguish 3 sets of voltages low 5v (12:00pm-1:00pm), medium 7v (2:00-3:00pm) and high 12v (4:00-5:00pm) even though the voltages will probably be off a little it's how I operate mine. so does the Lamptron FC-2 start at 6:00-7:00am at 5v like fan controllers should lol
 
Last edited:
Joined
Apr 24, 2009
Messages
126 (0.02/day)
I know fans have different starting voltage what I mean is, is there an average clock position a standard 5v fan starts at for example the Sunbeam Rheobus generally doesn't start moving until the 12:00pm position so it's easy to distinguish 3 sets of voltages low 5v (12:00pm-1:00pm), medium 7v (2:00-3:00pm) and high 12v (4:00-5:00pm) even though the voltages will probably be off a little it's how I operate mine. so does the Lamptron FC-2 start at 6:00-7:00am at 5v like fan controllers should lol

Ill look it up for ya when I can, my darn tester psu went bad and I'm going to find another cheap one soon :(
 
Joined
Nov 22, 2007
Messages
1,554 (0.26/day)
Location
Annapolis, MD
System Name n.audBl
Processor E8500 @ 3.80GHz
Motherboard ASUS Striker Extreme
Cooling Full liquid (everything except power supply)
Memory 4Gb OCZ DDR2 PC9600
Video Card(s) Dual EVGA GTX 280 SSC Edition
Storage Dual WD Raptor in RAID 0 (300Gb), Dual WD 1Tb Cavair in RAID 1
Display(s) Dell 2407 24" HD+ Widescreen
Case Theraltake Tai-Chi
Audio Device(s) X-Fi Fata1ty (bleh!)
Power Supply Ultra X3 1000W
Software Win 7 64bit
Nice work KIK! I actually decided not to buy this controller because of the dark corners... funny that is is a simple matter of grinding the metal out of the way.

I'm wondering if perhaps there is room for a white 4" cathode tube in the controller to help bring the illumination on the top of the arc up to the same brightness as the rest. Nice job witht he paper, I have used the same technique to help diffuse the light in my CoolerMaster V8.
 
Top