Cheers
, the Fury Tri-X OC ROM is invalid for assessing stock VID DPM 7 IMO, as it's not at AMD stock clocks for Fury.
AFAIK the driver/ROM under EVV calculates VID per DPM at AMD clocks, deviating from it creates anomaly.
For example if I changed DPM 7 frequency on my Fury Tri-X STD to greater than 1000MHz I'd get 1.250V. In the case of Fury X cards which I had where DPM 7 @ 1050MHz lower than 1.250V increasing clock above 1050MHz resulted in 1.250V. The max EVV mode will make DPM 7 is 1.250V with clock changes from AMD stock.
*** edit ***
"Not just the DPM7 all are affected except 0 since from 1-7 the voltage is generated depending on the chip quality."
Yes, indeed
.
Default GPU clock per DPM + LeakageID + other GPU properties.
From what the Stilt stated in the case of other gen ASIC was within LeakageID band there is also good / bad ASIC. For example we take two identical LeakageID ASIC, one good and other bad, the bad ASIC will end up with higher VID where as good ASIC lower VID.