- Joined
- Jun 20, 2008
- Messages
- 2,861 (0.49/day)
- Location
- Northants. UK
System Name | Bad Moon Ryzen |
---|---|
Processor | Ryzen 5 5600X |
Motherboard | Asrock B450M Pro4-F |
Cooling | Vetroo V5 |
Memory | Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4 |
Video Card(s) | 6700 XT |
Storage | Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb |
Display(s) | Gigabyte G24F-2 (180Hz Freesync) & 4K Samsung TV |
Case | Fractal Design Meshify 2 Compact w/Dark Tempered Glass |
Audio Device(s) | Onboard |
Power Supply | MSI MPG A850GF (850w) |
VR HMD | Rift S |
I've had my system for about a month and a half now. On the whole it has been very stable even when overclocked. On a cold boot or on reboots sometimes I would get " New CPU installed" Press F1 to enter settings or F2 to run default values. On entering the values or just F10 save and exit it would then boot up as normal. I put this down to a slightly picky bios as my processor initially was not natively supported by the board (1090T)
Recently I saw a bios update was available which added "system stability". I updated and the flash went fine. Last night after a gaming session I rebooted and it brought up that same "New CPU installed blah blah"
Since then it just keeps doing it and the only way I can boot is with default values which runs the processor at 3.2 with no turbo, my ram at an incorrect 1333 9-9-9 timings and no northbridge overclock.
Don't know what to do and it's really pissing me off Looking up the problem on google it seems ASUS boards had this problem a few years ago but not only that, on the ASUS forums another guy has exactly the same problem with the same motherboard and processor
Any ideas guys as it's an area I have no knowledge in whatsoever.
Recently I saw a bios update was available which added "system stability". I updated and the flash went fine. Last night after a gaming session I rebooted and it brought up that same "New CPU installed blah blah"
Since then it just keeps doing it and the only way I can boot is with default values which runs the processor at 3.2 with no turbo, my ram at an incorrect 1333 9-9-9 timings and no northbridge overclock.
Don't know what to do and it's really pissing me off Looking up the problem on google it seems ASUS boards had this problem a few years ago but not only that, on the ASUS forums another guy has exactly the same problem with the same motherboard and processor
Any ideas guys as it's an area I have no knowledge in whatsoever.