Media and data integrity errors

[msiejak]

Hello. I was wondering if anyone can tell me what these mean. From most people posting about them, there is no more than double digits. However, I have 1051556645921812989870080 Media and Data Integrity Errors on my SK hynix PC711 on my new HP dev one. Thanks!

Here's my entire smartctl output


smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.7-arch1-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, smart mon tools

=== START OF INFORMATION SECTION ===
Model Number: SK hynix PC711 HFS001TDE9X073N
Serial Number: KDB3N511010503A37
Firmware Version: HPS0
PCI Vendor/Subsystem ID: 0x1c5c
IEEE OUI Identifier: 0xace42e
Total NVM Capacity: 1,024,209,543,168 [1.02 TB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: ace42e 00254f98f1
Local Time is: Wed Nov 9 13:58:37 2022 EST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg
Maximum Data Transfer Size: 64 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Namespace 1 Features (0x02): NA_Fields

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 6.3000W - - 0 0 0 0 5 5
1 + 2.4000W - - 1 1 1 1 30 30
2 + 1.9000W - - 2 2 2 2 100 100
3 - 0.0500W - - 3 3 3 3 1000 1000
4 - 0.0040W - - 3 3 3 3 1000 9000

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
1 - 4096 0 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 34 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 0%
Data Units Read: 13,162,025 [6.73 TB]
Data Units Written: 3,846,954 [1.96 TB]
Host Read Commands: 156,458,059
Host Write Commands: 128,658,566
Controller Busy Time: 116
Power Cycles: 273
Power On Hours: 126
Unsafe Shutdowns: 15
Media and Data Integrity Errors: 1051556645921812989870080
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 34 Celsius
Temperature Sensor 2: 36 Celsius

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

 

[mfeerf]

Hello!

I am totally relieved...
I have the exactly same media and data integrity errors on my brand new HP laptop:
(there must be some bug somewhere)

smartctl -a /dev/nvme0n1
smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150400.24.38-default] (SUSE RPM)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: SK hynix BC711 HFM512GD3JX013N
Serial Number: FYB5N027811905M2M
Firmware Version: HPS1
PCI Vendor/Subsystem ID: 0x1c5c
IEEE OUI Identifier: 0xace42e
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: ace42e 002a741846
Local Time is: Thu Jan 12 23:24:35 2023 EET
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg
Maximum Data Transfer Size: 64 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Namespace 1 Features (0x02): NA_Fields

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 6.3000W - - 0 0 0 0 5 5
1 + 2.4000W - - 1 1 1 1 30 30
2 + 1.9000W - - 2 2 2 2 100 100
3 - 0.0500W - - 3 3 3 3 1000 1000
4 - 0.0040W - - 3 3 3 3 1000 9000

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
1 - 4096 0 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 20 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 0%
Data Units Read: 1,343,349 [687 GB]
Data Units Written: 1,101,021 [563 GB]
Host Read Commands: 8,284,919
Host Write Commands: 4,079,672
Controller Busy Time: 11
Power Cycles: 22
Power On Hours: 63
Unsafe Shutdowns: 1
Media and Data Integrity Errors: 1051556645921812989870080
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 20 Celsius
Temperature Sensor 2: 24 Celsius

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

 

[jon_joy_1999]

That looks like an error in Smartctl. It looks like it's misinterpreting the value that the drive is providing. Funny fact, the value that the drive is reporting in binary is 11011110101011010000000000000000000000000000000000000000000000000000000000000000 which translates into hexidecimal DEAD0000000000000000