Discussion in 'World Community Grid (WCG)' started by bogmali, May 14, 2009.
Great job stoners, keep up the great work.
paulieg passes 5,500,000
KieX passes 11,000,000
brandonwh64 passes 350,000
kevinheraiz passes 5,000
PHaS3 passes 300,000
KarL5275 passes 6,000
minhund passes 600,000
Great job stoners. @KieX searching the house for beer to toast you're numbers with.
Great job guys!
Congrats for the huge milestone Dan!
Jstn7477 passes 350,000
kevinheraiz passes 6,000
Zachary-85 passes 1,000,000
masterwolfe passes 2,000
KarL5275 passes 7,000
minhund passes 700,000
Great work stoners and congrats Zachary-85 on the big Mill.
Good Job Stoners! We also killed Canada today by almost 600,000!!!!!
I'm coming for you karl
Great job stoners, keep up the great work and consistency!
Guess I better get more computers running...
^^ that never hurts
kevinheraiz passes 7,000
KarL5275 passes 8,000
minhund passes 750,000
Great work stoners.
;3 Wait till monday, by then I'll have it ready
@Kevin The new cooler for the 955 should help.
It's not that, sadly, currently having the window open is my new cooler
BarbaricSoul passes 1,000,000
marlow.durbin passes 100,000
rickss69 passes 350,000
kevinheraiz passes 8,000
KarL5275 passes 9,000
minhund passes 800,000
Congrats on the big Mill BarbaricSoul
@marlow.durbin you can now get the cruncher badge.
great work stoners.
fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu I need to set up more rigs!
Huge congrats to all the stoners!!!!!!!!
Ye ha Barbaric makes it to the big 1 million!!! Welcome to the million club man.
Sorry guys my rig is down after a bad OC, I guess I won't be crunching today. If any of you have some ideas I have a thread open
I seen that Kevin! Damn man, short of doing the jumper while running I am not sure what else to try.
Did you try a different Power Supply? Don't think that is the problem but it may be worth a try man. I could have been the PSU and it just happened at the same time you were rebooting.
I know it is early and all, however I just wanted to post these to milestones for early today.
kevinheraiz passes 9,000
KarL5275 passes 10,000
I don't have another PSU in the house that has enough wattage for my rig, I don't think it's the PSU though. All the fans spin, and the mobo has a light letting me know I'm getting power
I didn't read the thread, but here is the right way to clear cmos.
Thanks, but it doesn't boot after that either. I had it jumped for 10 mins just in case.
Pull the board out of the case, as I seen where you said your sister got it to fire up moving one of the sata cables. Set the board on a box with the anti static bag under the board. Put just one stick of ram and a video card in the board along with the CPU and heat sink.
Can't remember if that board has the start button on the board but if not just short the start pins with a screw driver. See if it fires up that way.
Even if you only have a 350 watt or so power supply it should be enough to do the above test.
I am somewhat suspecting either the CPU went bad, power supply, or ram.
Keep us posted Kevin!
Separate names with a comma.