Milestones

[mstenholm]

On the contrary , Ive sped up quite a bit

You sure have but the spread between milestones is also increasing. My next one isn't before sometime this spring. How much is the 3950x running?

 

[phill]

On the contrary , Ive sped up quite a bit

I look forward to you speeding past me then soon

 

[Lorec]

You sure have but the spread between milestones is also increasing. My next one isn't before sometime this spring. How much is the 3950x running?

On windows not much better than Your 3900x tbh, was getting around 24k~ PPD so yeah,
for some reason I have trouble with setting up ubuntu here on dual boot so hard to tell how much would I get then yet.
Guessing @PolRoger is running his 3950x on linux... seen significant boost in his PPDs recently

 

[phill]

On windows not much better than Your 3900x tbh, was getting around 24k~ PPD so yeah,
for some reason I have trouble with setting up ubuntu here on dual boot so hard to tell how much would I get then yet.
Guessing @PolRoger is running his 3950x on linux... seen significant boost in his PPDs recently

Got a spare cheap SSD you could use for another OS and save having to configure a dual boot?

 

[Lorec]

Got a spare cheap SSD you could use for another OS and save having to configure a dual boot?

I kinda did. I have two nvme ssd and one sata. that sata one was almost empty so I made a partition there and I installed ubuntu there.
for some reason it created dual boot files on my main nvme ssd though.
When I boot ubuntu it doesnt recognize my wifi adapter and I cant download boinc off the software app (like I did on ryzen 7 1700 rig)

 

[mstenholm]

On windows not much better than Your 3900x tbh, was getting around 24k~ PPD so yeah,
for some reason I have trouble with setting up ubuntu here on dual boot so hard to tell how much would I get then yet.
Guessing @PolRoger is running his 3950x on linux... seen significant boost in his PPDs recently

So you run it 100%? Mine is 23 threads (one for folding) and 24/7. MCM only, well I did have 4-5 other. @PolRoger "forgot" to set Display my data under Settings, Data Sharing but I presume that the hick came from the 3950X.

 

[PolRoger]

Guessing @PolRoger is running his 3950x on linux... seen significant boost in his PPDs recently

No Linux... All setups are running on W10 or W7. I was running ~6 setups but I recently took 2 off-line.

So you run it 100%? Mine is 23 threads (one for folding) and 24/7. MCM only, well I did have 4-5 other. @PolRoger "forgot" to set Display my data under Settings, Data Sharing but I presume that the hick came from the 3950X.

Here is a ~30 day "snip" of my highest output machine. It was previously running with a 3900X but got upgraded to a 3950X.

 

[mstenholm]

No Linux... All setups are running on W10 or W7. I was running ~6 setups but I recently took 2 off-line.


Here is a ~30 day "snip" of my highest output machine. It was previously running with a 3900X but got upgraded to a 3950X.

View attachment 141095

Hmm.....I better make good of my promise to my self and get that 3950X. Sweet.

 

[phill]

I kinda did. I have two nvme ssd and one sata. that sata one was almost empty so I made a partition there and I installed ubuntu there.
for some reason it created dual boot files on my main nvme ssd though.
When I boot ubuntu it doesnt recognize my wifi adapter and I cant download boinc off the software app (like I did on ryzen 7 1700 rig)

Have you an older 60gb or 120Gb SSD? Just use that and connect up whenever you want to crunch, then swap over to Windows when you wish to game or something The dual boot thing isn't that bad with Mint and Windows... I have it running with one of my rigs I use for my server backups

 

[Lorec]

So you run it 100%? Mine is 23 threads (one for folding) and 24/7. MCM only, well I did have 4-5 other.

I run it periodically for couple days streaks then let it cool off.
its my main rig for gaming and all as well so im being a little gentle with it.

No Linux... All setups are running on W10 or W7. I was running ~6 setups but I recently took 2 off-line.
Here is a ~30 day "snip" of my highest output machine. It was previously running with a 3900X but got upgraded to a 3950X.
View attachment 141095

Thats like easily twice what I get on my 3950x 24/7 100% MCM... I get a lot of pending validations.

Have you an older 60gb or 120Gb SSD? Just use that and connect up whenever you want to crunch, then swap over to Windows when you wish to game or something The dual boot thing isn't that bad with Mint and Windows... I have it running with one of my rigs I use for my server backups

Maybe I should just install linux without windows drives plugged, and then it works?
Dual boot thing is kinda neat but it pisses me off with that selection box everytime I restart.

@PolRoger "forgot" to set Display my data under Settings, Data Sharing but I presume that the hick came from the 3950X.

@PolRoger pls set up data sharing so we can stalk You

 

[phill]

It's a bit of a faff but it would work fine The selection screen isn't so bad, I can't remember if you can default it to something or if it just sits at the top and that's it... Been a little while since I set it up

 

[mstenholm]

I run it periodically for couple days streaks then let it cool off.
its my main rig for gaming and all as well so im being a little gentle with it.


Thats like easily twice what I get on my 3950x 24/7 100% MCM... I get a lot of pending validations.
View attachment 141132

Maybe I should just install linux without windows drives plugged, and then it works?
Dual boot thing is kinda neat but it pisses me off with that selection box everytime I restart.


@PolRoger pls set up data sharing so we can stalk You

No, Linux dosen't have the driver for that Wi-fi version yet, at least that is what I think is the reason. I had the same problem on my X570 board but @agent00skid "fixed" it for me. Maybe he can give you a hit on how to install it. You do need to have a wire connection to download the correct driver.

 

[mstenholm]

It's a bit of a faff but it would work fine The selection screen isn't so bad, I can't remember if you can default it to something or if it just sits at the top and that's it... Been a little while since I set it up

Again with my limited Linux knowledge it will default to Linux after 10 seconds or so and I haven't heard about a work-around. I like that it defaults to Linux since that is the reason for my dual-boot rigs - performance for most of the time, Windows if I want to check temperatures or print on my old 3800 Epson.

 

[phill]

I must admit I've never looked into it defaulting to another OS other than Linux, as like yourself, I aimed it to go into Linux more often than Windows that I was dual booting it with. It's handy and it's not that much of a pain if you wanted to have another SSD in the system to boot from another OS if the dual setup was a pig to do...

If I remember correctly, I think you'd have to install Windows first and then Linux... I don't think there's that much else too it if I'm honest...?

 

[phill]

Stoners for the 2nd January 2020....

Sadly no one today but there's always tomorrow!!

 

[phill]

Stoners for the 3rd January 2020....

Sadly no one today but there's always tomorrow

 

[phill]

Stoners for the 4th January 2020....

Sadly no one today, but there's always tomorrow

 

[phill]

Stoners for the 5th January 2020....

Sadly no one today, but there's always tomorrow

 

[phill]

Stoners for the 6th January 2020....

@carlramsey??!!

Great work to see you in the milestones !! Does anyone know carlramsey's forum name if he's a member here so I can tag him in it??
Until tomorrow everyone

 

[phill]

Stoners for the 7th January 2020....

@Radical_Edward !!
@theoneandonlymrk !!

Amazing work from our stoners today, great to see you!! We hope to see you again soon!!

 

[phill]

Stoners for the 8th January 2020....

Sadly no one today, but there's always tomorrow

 

[phill]

Stoners for the 9th January 2020.....

Sadly no one today, but there's always tomorrow

 

[phill]

Stoners for the 10th January 2020....

Sadly there's no one today, but there's always tomorrow !!

 

[phill]

Stoners for the 11th January 2020.....

Sadly no one today, but there's always tomorrow

 

[phill]

Stoners for the 12th January 2020....

@tami626 !!

Great work to our stoner today!! Hope to see you again soon @tami626 !! Please do keep up the great work!!