Mining BIOS repository

cdawall · Sep 27, 2017

I have been testing quite a few different cards with different BIOS's I will go ahead and post each of them that I have with some instructions. If you have some tested BIOS's feel free to post them up and I will add them to the list!

Also if you are feeling nice you are welcome to donate to my btc address :roll:

BTC: 19iAVF4Mi89hZYdfhVLj9MEU6Pa8VbNbDK

ETH: 0xFA753B35457A06044992A375FD084Ce9F04Ab3BF

LTC: LVbmEU3kA8YA7RtDbvpJrR6oPQiMacoQ77

Asus

Strix RX 570 4GB Elpida
29mh/s

RX480-08G 8GB Samsung
31mh/s

Tul based cards (Powercolor/Visiontek/etc)

Powercolor 470/570 Samsung revision C (based off of mining card DVI only functionality ?)
29MH/s 85w TDP

Powercolor 480 "red devil/red dragon" Samsung revision B
31MH/s 85w TDP

Powercolor 4804GBD53DHD Samsung revision B
31MH/s 107w TDP

Powercolor 560 4GB Micron
12MH/s 45w TDP

MSI

570 Elpida (armor 4GB)
29MH/s

570 Elpida (Gaming X 4GB)
29MH/s

570 Hynix (Gaming X 4GB)
29.5MH/s

480/580 Hynix (Armor 4GB)
30mh/s

580 Hynix (Gaming X 8GB)
31.5mh/s

Sapphire

470 Nitro+ 4GB Elpida
29Mh/s 108w TDP

480 Nitro+ 8GB Samsung
31Mh/s 110w TDP

580 Nitro "special edition" 8GB Hynix/Samsung
31mh/s

580 Nitro+ 8GB Hynix/Samsung
31mh/s

580 Nitro+ 4GB Elpida (two BIOS versions check both for stability, hynix strap is better if stable)
30mh/s

580 Nitro+ 4GB Hynix
30mh/s

REFERENCE+SAMSUNG

480
31MH/s 110w TDP

VisionTek

480 8GB REFERENCE/SAMSUNG
31MH/s 110w TDP

XFX

580 GTR 8GB Hynix/Samsung
31MH/s 120w TDP

570 4GB Elpida
29mh/s

470 4GB Hynix/Samsung
29mh/s

cdawall · Sep 27, 2017

Memory straps for different cards these are based off of older DAG's you may loose 1-2MH/s depending on current DAG

Samsung Revision B, this is my go to strap for any Samsung based card "b" or "c" revision, the B revision memory can normally do 2250-2275 with this strap and is good for 31+ on a 480/580 and 28-29+ on a 470/570

777000000000000022CC1C00106A6D4DD0571016B90D060C006AE70014051420FA8900A0030000001B11333DC0303A17

Elpida this is actually a strap for Hynix H5GC4H24AJ and Samsung rev C, but it yielded better performance than using the Elpida strap on multiple cards I tested with. I have had an occasional share drop with this strap and it is good for around 2050mhz and 28-29mh/s on a 470/570.

777000000000000022AA1C00315A6B3CA0550F15B68C1506006AE4007C041420CA8980A9020004C01712262B612B3715

IF that strap is unstable for your card this is the strap I used to use it is about .5-1mh/s slower

777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116

Hynix this is another stolen strap, this is for Samsung rev C memory, it can normally equal if not best Samsung memory for performance. Clockspeed is good to around 2100mhz with this strap.

777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17

This is a 1500mhz strap for Hynix 4GB cards, the Samsung strap does not work well with ram part number H5GC4H24AJ, this is the same strap as some Elpida memory, this ram behaves a lot like Elpida.

777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116

Micron these are a bit more of a pain to deal with...this is the 1750 strap and it can normally do 2050-2100 depending on card. It actually matches the Samsung rev C strap, I may have to dig into this more and see if the OEM hynix strap works better. I no longer have a Micron based card though so if you have one and would like to see it tweaked please send me the BIOS!

777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17

cdawall · Sep 27, 2017

EDIT ADDING ADDITIONAL BIOS's

cdawall · Sep 29, 2017

How to flash you card.

Download ATiWinflash link to here

Run ATiWinflash as Admin

Select the BIOS

Select program

In theory you should get this next

Reboot

Depending on which BIOS you are using you may have to run the ATi patcher for the BIOS signature. I have included that in here.

If everything went well GPUz should show your new clocks

And you should have better performance than your original BIOS.

This is a really cheap powercoler RX560 4GB I have been playing with, it is on a ZEC minded BIOS right now that doesn't really care about power consumption, more of a "I wonder".

Jetster · Oct 8, 2017

Maybe start this thread with a warning? Looks like you put allot of work in

cdawall · Oct 8, 2017

Jetster said:
Maybe start this thread with a warning? Looks like you put allot of work in

I assume if they have made it this far they understand the risks. :roll:

Jetster · Oct 8, 2017

You would think :fear:

Super XP · Oct 9, 2017

Great Info,
Thank You,
BTC Acc
1Dv1u1mbmw1EdkSMbPZcJnqN81JzMQZfPZ
1PrgXGbV1CiwbBjEa3P5MpK4jXF1VoBH74
:roll:

MrGenius · Oct 9, 2017

cdawall said:
Download ATiWinflash link to here

Run ATiWinflash as Admin

1. That's an antiquated version of ATIWinflash you linked to there. There's really no reason not to use the latest version 2.77 here.

2. ATIWinflash doesn't "need" to be run as administrator. You can...but it's a waste of a mouse click. When all you need to do is left click once to run it.

cdawall · Oct 9, 2017

I just linked tpu. I could care less which version it is lol.

This is for new users you have to run it as an admin for it to work so that's why the instructions for people using it have that in it. I notice you didn't make a thread and aren't really being helpful. Got anything useful to post?

cdawall · Oct 27, 2017

I have some more BIOS's to upload, seeing if W1z can give me the ability to do more than 10 attachments per post for simplicity before adding them in. Please don't hesitate to post BIOS's to mod.

technoob · Oct 30, 2017

Hello, here is a XFX 4x 474 original rom , I don't know how to mod the bios.
Thank you if you can help me out

I can donate ETH for you if it works.

sorry that i do not have btc :oops:

cdawall · Oct 30, 2017

I'll throw my eth account up there and get it modded for you shortly watching the Astros play the world series right now :roll:

@technoob Bios is posted to the main part of the thread, that is using the modded hynix strap, fan speed is adjusted to allow the card to go all the way up to 100% and ram clock is set to 2050@1000mV. if that is unstable let me know that is the same setup I use for my elpida cards that does 28-29mh/s

technoob · Oct 31, 2017

@cdawall hey dude , It is not work for me. When I turn on the miner , blue screen show up immediately.
The attachment is my original rom and Gpu-z information for my xfx card. (The rom gave to you yesterday from internet.)
my ram is Samsung but not Elpida or Hynix, I don't know is it matters.
Can you take a look again

cdawall · Oct 31, 2017

technoob said:
@cdawall hey dude , It is not work for me. When I turn on the miner , blue screen show up immediately.
The attachment is my original rom and Gpu-z information for my xfx card. (The rom gave to you yesterday from internet.)
my ram is Samsung but not Elpida or Hynix, I don't know is it matters.
Can you take a look again

Yes will do

@technoob

Here these are modded for hynix, strap set uses a samsung strap and matches my other hynix cards these normally pull of 27-30mh/s depending on DAG and driver used. Same bump in fan speed so it will go all the way to 100%. I have linked three bios's in this zip file let me know which works for you and I will toss them in the main post. There is a 2000, 2050 and 2100mhz one.

Prophetmgs88 · Nov 3, 2017

Hey its Cobb thanks for all the patience and help. This revision may help me understand better

cdawall · Nov 4, 2017

here @Prophetmgs88 give this one a shot

Maay Sim · Nov 5, 2017

Just to confirm, I can use samsung straps copy it to my hynix rx 580 sapphire nitro+ OC?? on which memory should i paste it?
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17

Super XP · Nov 5, 2017

Maay Sim said:
Just to confirm, I can use samsung straps copy it to my hynix rx 580 sapphire nitro+ OC?? on which memory should i paste it?
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17

Samsung straps for Hynix? I don't think so. Your GPU would crash. IMO

cdawall · Nov 5, 2017

Maay Sim said:
Just to confirm, I can use samsung straps copy it to my hynix rx 580 sapphire nitro+ OC?? on which memory should i paste it?
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17

Correct that is the strap I use for all of my Hynix bios's and is why I have several labeled Hynix/Samsung. You would paste that strap over everything 1750 and higher. Typically Hynix based cards will do 2050-2100mhz with that strap and Samsung cards will do 2250. You can also drop the ram voltage down to 950mV.

Lamplighter · Nov 11, 2017

what msi or trixx settings should i use with this? i am using nicehash atm.
power is through the roof.

this is a moded bios (not yours). the 24mh/s card is a 570

Sapphire

580 Nitro "special edition" 8GB Hynix/Samsung
31mh/s

Ryan Atfield · Nov 11, 2017

Please post Bios links below or inbox Me Msi Radeon RX580 GAMING X 8gb Hynix

I have tried two so far and still not reached 30 hash, also using a lot of power. I have over clocked in ethos as seen below.

Mem-2200

Core- 1200

Pwr - 3

VLT - 850

Fan - 40

cdawall · Nov 11, 2017

Lamplighter said:
what msi or trixx settings should i use with this? i am using nicehash atm.
power is through the roof.

this is a moded bios (not yours). the 24mh/s card is a 570

View attachment 93927

Sapphire

580 Nitro "special edition" 8GB Hynix/Samsung
31mh/s

Can you post your original bios and the modded one?

Ryan Atfield said:
Please post Bios links below or inbox Me Msi Radeon RX580 GAMING X 8gb Hynix

I have tried two so far and still not reached 30 hash, also using a lot of power. I have over clocked in ethos as seen below.

Mem-2200

Core- 1200

Pwr - 3

VLT - 850

Fan - 40

Post the original and I'll mod it for you. You can save it in a zip file and upload it straight to this thread

Ryan Atfield · Nov 11, 2017

What a legend! cheers pal

Tornador · Nov 12, 2017

I think my RX 580s 4GB/8GB with 256kb rom are drawing a bit too much power. I have been running them on Anorak's PowerSave roms, but they still are drawing a bit much and they are sometimes unstable above 2000/2100 RAM / 1125/1150 GPU / - 96mv in MSI AB. Any help much appreciated

Edit: added the modded bioses I have been experimenting with (from Anorak.tech)

System Name	All the cores \|\| Into the Blue
Processor	2990WX \|\| 5960X
Motherboard	Asrock X399M \|\| Asus X99M WS
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL \|\| TBD
Memory	4x8GB G.Skill Trident Z 3200 CL16 \|\| EVGA 3200 2x8GB
Video Card(s)	(2) EVGA SC BLACK 1080Ti's \|\| EVGA 1080Ti FE
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB \|\| OCZ Vector 180 480GB
Display(s)	Dell UP2414Q 3840X2160@60hz \|\| TBD
Case	Caselabs Mercury S5+pedestal \|\| Supermicro S5 (GS5A-753K)
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w \|\| Seasonic Snow Silent 750w
Mouse	Thermaltake Theron, Steam controller \|\| TBD
Keyboard	Thermaltake Poseidon ZX, Steam controller \|\| Corsair K70
Software	W10P \|\| W10P

System Name	All the cores \|\| Into the Blue
Processor	2990WX \|\| 5960X
Motherboard	Asrock X399M \|\| Asus X99M WS
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL \|\| TBD
Memory	4x8GB G.Skill Trident Z 3200 CL16 \|\| EVGA 3200 2x8GB
Video Card(s)	(2) EVGA SC BLACK 1080Ti's \|\| EVGA 1080Ti FE
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB \|\| OCZ Vector 180 480GB
Display(s)	Dell UP2414Q 3840X2160@60hz \|\| TBD
Case	Caselabs Mercury S5+pedestal \|\| Supermicro S5 (GS5A-753K)
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w \|\| Seasonic Snow Silent 750w
Mouse	Thermaltake Theron, Steam controller \|\| TBD
Keyboard	Thermaltake Poseidon ZX, Steam controller \|\| Corsair K70
Software	W10P \|\| W10P

System Name	All the cores \|\| Into the Blue
Processor	2990WX \|\| 5960X
Motherboard	Asrock X399M \|\| Asus X99M WS
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL \|\| TBD
Memory	4x8GB G.Skill Trident Z 3200 CL16 \|\| EVGA 3200 2x8GB
Video Card(s)	(2) EVGA SC BLACK 1080Ti's \|\| EVGA 1080Ti FE
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB \|\| OCZ Vector 180 480GB
Display(s)	Dell UP2414Q 3840X2160@60hz \|\| TBD
Case	Caselabs Mercury S5+pedestal \|\| Supermicro S5 (GS5A-753K)
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w \|\| Seasonic Snow Silent 750w
Mouse	Thermaltake Theron, Steam controller \|\| TBD
Keyboard	Thermaltake Poseidon ZX, Steam controller \|\| Corsair K70
Software	W10P \|\| W10P

System Name	All the cores \|\| Into the Blue
Processor	2990WX \|\| 5960X
Motherboard	Asrock X399M \|\| Asus X99M WS
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL \|\| TBD
Memory	4x8GB G.Skill Trident Z 3200 CL16 \|\| EVGA 3200 2x8GB
Video Card(s)	(2) EVGA SC BLACK 1080Ti's \|\| EVGA 1080Ti FE
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB \|\| OCZ Vector 180 480GB
Display(s)	Dell UP2414Q 3840X2160@60hz \|\| TBD
Case	Caselabs Mercury S5+pedestal \|\| Supermicro S5 (GS5A-753K)
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w \|\| Seasonic Snow Silent 750w
Mouse	Thermaltake Theron, Steam controller \|\| TBD
Keyboard	Thermaltake Poseidon ZX, Steam controller \|\| Corsair K70
Software	W10P \|\| W10P

System Name	Juliette // HTPC
Processor	Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard	ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling	Noctua NH-U12 Black // Stock
Memory	Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s)	EVGA GeForce RTX 2080 XC ULTRA GAMING// APU
Storage	Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s)	ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case	Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s)	Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply	Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse	Cooler Master MM710 53G
Keyboard	Logitech 920-009300 G512 SE
Software	Windows 10 Pro // Windows 10 Pro

System Name	RiseZEN Gaming PC
Processor	AMD Ryzen 7 5800X @ Auto
Motherboard	Asus ROG Strix X570-E Gaming ATX Motherboard
Cooling	Corsair H115i PRO RGB, 280mm Radiator, Dual 140mm ML Series PWM Fans
Memory	G.Skill TridentZ 64GB (4 x 16GB) DDR4 3200
Video Card(s)	ASUS DUAL RX 6700 XT DUAL-RX6700XT-12G
Storage	Corsair Force MP500 480GB M.2 & MP510 480GB M.2 - WD_BLACK 1TB SN850X NVMe 1TB
Display(s)	ASUS ROG Strix 34” XG349C 180Hz 1440p + Asus ROG 27" MG278Q 144Hz WQHD 1440p
Case	Corsair Obsidian Series 450D Gaming Case
Audio Device(s)	SteelSeries 5Hv2 w/ Sound Blaster Z SE
Power Supply	Corsair RM750x Power Supply
Mouse	Razer DeathAdder PC Gaming Mouse - Ergonomic Left Hand Edition
Keyboard	Logitech G910 Orion Spectrum RGB Gaming Keyboard
Software	Windows 11 Pro - 64-Bit Edition
Benchmark Scores	I'm the Doctor, Doctor Who. The Definition of Gaming is PC Gaming...

Mining BIOS repository

where the hell are my stars

Attachments

where the hell are my stars

Attachments

where the hell are my stars

Attachments

where the hell are my stars

Attachments

where the hell are my stars

where the hell are my stars

where the hell are my stars

New Member

Attachments

where the hell are my stars

New Member

Attachments

where the hell are my stars

Attachments

Attachments

where the hell are my stars

Attachments

New Member

where the hell are my stars

New Member

New Member

where the hell are my stars

New Member

Attachments

New Member

Attachments