Hi! I've been struggling a lot with this. I recently updated my pc (changed mobo,cpu and rams), and since then I cant get my system stable. These are the specs:
CPU: Ryzen 9 3900x
MOBO: Asus TUF x57
RAMS: 2x8gb HyperX Predator @4000MHz
PSU: 650w 80+ Bronze
So here's the full story: I updated my pc and from the first day I cant get it to be stable. I had some 2x8gb Corsair Vengeance RGB @3600MHz that werent in QVL list so I returned them and bought the HyperX kit I mentioned. With the Corsair sticks I could get it work if I only use one stick, but as soon as I put two at the same time, the system got unstable and it even wont post ( mobo stucked in DRAM light).
Well, today I got my new RAMs and when I first connected it all worked fine (I gave it very low use bc I needed to finish some work asap and I didnt want to risk my pc to freeze again). When I finish my work I set the rams to 3600mhz (one of the two docp profiles available for my rams) and it booted but when I did a test (5min running aida64) it freezed again. So I updated my BIOS to the last version (I cant remember if I can get it to post after BIOS update) but the thing is that now my mobo doesnt do anything, when I power on the pc it turns on DRAM light, then the CPU light for one second and after that nothing happens.
I already tried removing the mobo batery, and clearing cmos but I can get my system to boot. I also tried with only one ram stick.
What is failing? Cpu, mobo or ram? Is there a solution for this? IMO, the rams have nothing to do with it, but Im kind of noob in this stuff. Im a bit sad bc I spent a lot of money and since I updated the pc I couldnt enjoy it yet
Ps: both cpu and mobo are suposed to have warranty.
CPU: Ryzen 9 3900x
MOBO: Asus TUF x57
RAMS: 2x8gb HyperX Predator @4000MHz
PSU: 650w 80+ Bronze
So here's the full story: I updated my pc and from the first day I cant get it to be stable. I had some 2x8gb Corsair Vengeance RGB @3600MHz that werent in QVL list so I returned them and bought the HyperX kit I mentioned. With the Corsair sticks I could get it work if I only use one stick, but as soon as I put two at the same time, the system got unstable and it even wont post ( mobo stucked in DRAM light).
Well, today I got my new RAMs and when I first connected it all worked fine (I gave it very low use bc I needed to finish some work asap and I didnt want to risk my pc to freeze again). When I finish my work I set the rams to 3600mhz (one of the two docp profiles available for my rams) and it booted but when I did a test (5min running aida64) it freezed again. So I updated my BIOS to the last version (I cant remember if I can get it to post after BIOS update) but the thing is that now my mobo doesnt do anything, when I power on the pc it turns on DRAM light, then the CPU light for one second and after that nothing happens.
I already tried removing the mobo batery, and clearing cmos but I can get my system to boot. I also tried with only one ram stick.
What is failing? Cpu, mobo or ram? Is there a solution for this? IMO, the rams have nothing to do with it, but Im kind of noob in this stuff. Im a bit sad bc I spent a lot of money and since I updated the pc I couldnt enjoy it yet
Ps: both cpu and mobo are suposed to have warranty.