• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Modified driver for X-Fi Titanium series sound cards XFTI_PCDRV_L11_2_40_0019

Status
Not open for further replies.
Joined
Aug 1, 2019
Messages
69 (0.04/day)
I can't install any executable that's inside the folders, it's strange because it hasn't happened to me before with any driver.... Windows simply refuses to run it.
Have you tried clean tails, for example using Driver Fussion?
 

RetroPC

New Member
Joined
Mar 13, 2022
Messages
28 (0.03/day)
This is just strange, the installers are the same in both versions.
Don't have a third-party antivirus? Maybe he blocked him.
I don't use antivirus o antimalware... Testing with the executables, when I go to the Audio\Setup folder and run setup.exe, Windows detects that the program may not have been installed correctly... could it be some kind of incompatibility with the installshield version?
 

Attachments

  • error.PNG
    error.PNG
    12.6 KB · Views: 27
Joined
Aug 1, 2019
Messages
69 (0.04/day)
I don't use antivirus o antimalware... Testing with the executables, when I go to the Audio\Setup folder and run setup.exe, Windows detects that the program may not have been installed correctly... could it be some kind of incompatibility with the installshield version?
Well, let's try another version of the driver... even better than 2.17.0008. Let's see how she behaves. But to install it, you must disable driver signature verification. This is a driver from an Auzentech card and has a driver architecture similar to Ti HD, but without using THX technology and has the same CMSS3D. And also has no problems with EAX in older games.
 
Last edited:

RetroPC

New Member
Joined
Mar 13, 2022
Messages
28 (0.03/day)
Well, let's try another version of the driver... even better than 2.17.0008. Let's see how she behaves. But to install it, you must disable driver signature verification. This is a driver from an Auzentech card and has a driver architecture similar to Ti HD, but without using THX technology and has the same CMSS3D. And also has no problems with EAX in older games.
Thank you! The first thing I did was put Windows in safe mode and uninstalled the creative driver through DDU. Then I disabled Disable driver signature enforcement and installed your new v2.20 driver; The first time Windows started (with the driver installed) I had no audio but when I restarted it worked as it should. Now I am testing the quality and stability, since my computer is on 365 days a year and with other drivers I have noticed sound anomalies such as cracks or noises when not restarting Windows for days.
BTW, back in the day, when I read reviews about the first Auzentech cards with an X-Fi license, what stood out was the stability of the driver, so let's see how it behaves, saludos!

EDIT: With this driver the maximum frequency is 24/192 and the microphone effects are not present, so it is not possible to remove ambient noise and enable VoiceFX effects.
 

Attachments

  • setup.png
    setup.png
    365.8 KB · Views: 66
Last edited:
Joined
Aug 1, 2019
Messages
69 (0.04/day)
EDIT: With this driver the maximum frequency is 24/192 and the microphone effects are not present, so it is not possible to remove ambient noise.
Yes, I gave you a trial test version. I’ll fix all these nuances now and re-upload the driver. Saving via sleep mode cannot be fixed.
Great, but I want to note that the settings are saved through sleep mode. That is, we fully configured the card and saved the settings by entering and exiting sleep mode
 

RetroPC

New Member
Joined
Mar 13, 2022
Messages
28 (0.03/day)
Yes, I gave you a trial test version. I’ll fix all these nuances now and re-upload the driver. Saving via sleep mode cannot be fixed.
Great, but I want to note that the settings are saved through sleep mode. That is, we fully configured the card and saved the settings by entering and exiting sleep mode
Thank you very much for your time and effort!. The Creative drivers (for X-Fi) were never 100% stable and with each new version they broke things (Codemasters Rulz!). Regarding not being able to save changes in the traditional way, I don't see a big issue.

NOTE: I recommend that you put all these drivers in your first post, so the latest version is always downloaded, greetings!
 
Joined
Aug 1, 2019
Messages
69 (0.04/day)
Thank you very much for your time and effort!. The Creative drivers (for X-Fi) were never 100% stable and with each new version they broke things (Codemasters Rulz!). Regarding not being able to save changes in the traditional way, I don't see a big issue.
I fixed everything and re-uploaded the driver.
 
Last edited:
Joined
Nov 19, 2014
Messages
52 (0.01/day)
So this driver finally work for titanium ? 80880? Forgot the numbers exactly ..
 

RetroPC

New Member
Joined
Mar 13, 2022
Messages
28 (0.03/day)
I fixed everything and re-uploaded the driver.

Thanks, I'll try it and leave my impressions!

NOTE: The driver is missing, when you can, upload the new version :) I'll be waiting patiently, saludos!
 
Last edited:
Joined
Sep 19, 2021
Messages
18 (0.02/day)
Try these drivers first:


It seems that the best version for titanium cards is 2.17.0008C but it does not install on my PC for some reason... saludos
I tried these but having an issue with the pc not picking up the subwoofer from my 5.1 z5500. I tested the other channels and they all work apart from subwoofer.
 
Joined
Aug 1, 2019
Messages
69 (0.04/day)
I tried these but having an issue with the pc not picking up the subwoofer from my 5.1 z5500. I tested the other channels and they all work apart from subwoofer.
Did you include bass redirect in the console launcher?
 
Joined
Aug 1, 2019
Messages
69 (0.04/day)
If version 2.40.0019 is installed, then this is the latest official driver. SB0880 is not very friendly with him. Is there no subwoofer sound from the analog output? What is the sound source?
 
Joined
Sep 19, 2021
Messages
18 (0.02/day)
If version 2.40.0019 is installed, then this is the latest official driver. SB0880 is not very friendly with him. Is there no subwoofer sound from the analog output? What is the sound source?
i was using analog and 6 channel effect on z5500. prefer analog for music and games and use optical only for movies

If version 2.40.0019 is installed, then this is the latest official driver. SB0880 is not very friendly with him. Is there no subwoofer sound from the analog output? What is the sound source?

If version 2.40.0019 is installed, then this is the latest official driver. SB0880 is not very friendly with him. Is there no subwoofer sound from the analog output? What is the sound source?
i uninstalled the drivers and just used normal windows 5.1 configurator and tested it again and the subwoofer works. but with the driver installed im getting sound from the satellites properly but no subwoofer.
 
Last edited:
Joined
Aug 1, 2019
Messages
69 (0.04/day)
I am using version 2.17.0008. On my SB0886 the 5.1 speakers work great. Give it a try.
 
Last edited:
Joined
Dec 7, 2018
Messages
6 (0.00/day)
Have X-fi Titanium Fatality Champion which i was unable to install drivers and was forcing me to disable "Core Isolation". Was planning to get SB AE-9 as alternative to work with Win11. So do i need to disable "Core Isolation" in Windows 11 Security app for this driver to install and work?
 
Last edited:
Joined
Sep 19, 2021
Messages
18 (0.02/day)
hey, i was using realtek console before switching to creative. in realtek i was able to increase the sound of the center speaker to get more sound from the center. any idea how to increase the center channel in creative launcher. i can only decrease the levels, not Increase/
 
Joined
Aug 1, 2019
Messages
69 (0.04/day)
If only you reduce all other channels and increase the overall volume.
 

Attachments

  • Снимок экрана 2024-10-09 220535.png
    Снимок экрана 2024-10-09 220535.png
    42.4 KB · Views: 39
Joined
Dec 7, 2018
Messages
6 (0.00/day)
hey, i was using realtek console before switching to creative. in realtek i was able to increase the sound of the center speaker to get more sound from the center. any idea how to increase the center channel in creative launcher. i can only decrease the levels, not Increase/
You need to install Creative THX console for X-fi. Once installed, it is accessible via Creative Console launcher when you click on the speaker icon near the 2.1/4.1/5.1/Headphones dropdown. There you can set the position of the speakers and increase volume individually for each speaker.
 

fttlov

New Member
Joined
Oct 10, 2024
Messages
1 (0.04/day)
Updated the package with a modified driver. The main APOs were replaced with more advanced ones, support for 64-bit APOs, edits were made that significantly reduced non-linear distortions and improved the overall sound. We also cut out all the unnecessary rubbish. Updated some driver files to new ones. The OpenAL library for 64-bit architecture is installed automatically.
Attention!!! Major changes have been made to the driver and therefore before installation you must disable digital signature verification and auto-update of drivers from the Windows Update Center. Because the driver has lost its digital signature. Yes, it's inconvenient, but this is probably the best sound I've heard on my sound card.
Only for OS Windows 10+
Tested on Sound Blaster X-Fi Titanium Fatal1ty Champion Series\Win11 23H2

Addition: Added Processing Modes Supported For Streaming. The outdated Creative Audio Service was replaced by the modern Sound Blaster Service and integrated directly into the driver itself, which led to stable operation of the service and creative software. The driver has been re-uploaded.
Please reupload modded driver with 2.40.0008. I tested your 2.17.0008 driver from another thread and get a BSOD with Mafia 1 trought Alchemy on my 0880 (Openal problem, i think) and 44.1 BSOD in CM (not critical for me)/ 2.17.0008C with sleep trcik is not good for me, cause change 2.1 <> 7.1 and switch mode regularly. Daniel x-fi 5 pack has no openal problem. Thank you for your work!
 
Joined
Aug 1, 2019
Messages
69 (0.04/day)
Please reupload modded driver with 2.40.0008. I tested your 2.17.0008 driver from another thread and get a BSOD with Mafia 1 trought Alchemy on my 0880 (Openal problem, i think) and 44.1 BSOD in CM (not critical for me)/ 2.17.0008C with sleep trcik is not good for me, cause change 2.1 <> 7.1 and switch mode regularly. Daniel x-fi 5 pack has no openal problem. Thank you for your work!
So, what’s the problem? I set up all the modes once, save them, and then switch as many times as needed. But version 2.40.0008 still has problems with OpenAL. Or use Daniel's driver if you need to have a regular save and working OpenAL. On my card on the Daniel driver, the remote front panel, microphone effects and WUH do not work, which is critical for me.
 
Last edited:

RetroPC

New Member
Joined
Mar 13, 2022
Messages
28 (0.03/day)
Please reupload modded driver with 2.40.0008. I tested your 2.17.0008 driver from another thread and get a BSOD with Mafia 1 trought Alchemy on my 0880 (Openal problem, i think) and 44.1 BSOD in CM (not critical for me)/ 2.17.0008C with sleep trcik is not good for me, cause change 2.1 <> 7.1 and switch mode regularly. Daniel x-fi 5 pack has no openal problem. Thank you for your work!
Mafia is not a game with OpenAL support ( https://docs.google.com/document/d/1j7hqIk0LzMnagk4GHHHk13Bb2L-zt9KRqRRVsnGpLCE/edit?tab=t.0 ) it uses DS3D so the BSOD should not be caused by this reason, I assume you are using ALchemy to restore audio... If I'm not wrong, the SB880 is an X-Fi Titanium (without xram = 16MB). Antes533 has re-uploaded the driver v2.40.0008C with some improvements (the link is a few posts above 92) I suggest that you try again, but first make sure to correctly uninstall the previous driver and software, if necessary format your PC to rule out any other problem.
 
Status
Not open for further replies.
Top