• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

MoonPig's Armor Mod

Joined
Feb 26, 2008
Messages
1,037 (0.18/day)
Location
London, England
System Name Le Don
Processor Core i 5 2500K Unlocked 3.3GHz HD Graphics 3000
Motherboard Asus P8P67 Pro B3 Revision Rev 3.1
Cooling Arctic Freezer Pro 7 Rev.2
Memory 8Gb Corsair DDR3 (CMZ8GX3M2B1600C9), 1600MHz, 1.5V, 9-9-9-24
Video Card(s) EVGA Signature 2 Super Clocked GTX680 2GB
Storage Total 6 TB storage
Display(s) LG 23" D2342P and LG 42" 42LF65 LCD (Wall mounted)
Case Antec P180 Silver
Audio Device(s) Audigy 2 ZS Platinum Pro
Power Supply Corsair 850HX
Software Windows 7 Ultimate 64-bit,
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Ok, bad news...

Went to all my local DIY stores and non had anything near a 120mm holesaw. Except BnQ, they had a 117mm one, but it cost £74.... NO.

Managed to get some Tin Snips though :D

Any ideas how i should go about this?

Im thinking, drill a big hole in the middle, then tin snip it.
 
K

kyle2020

Guest
ouch, tin snips will take some work, MK swears by them but if im honest I really struggle using them.

Personally Id have used a rotary tool and some files.
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
I'm having a seriously hard time finding a 120mm (or just less) holesaw....

Anyone have a spare or know of any. Wanting less than £15, ideally.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Dont use tin snips, you'll find it impossible to get a clean edge and keep the metal flat.

Youd be better of getting a jigsaw (if you havent already) and some metal blades for that.
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Can't use the Jigsaw, Only got Wood blades for it and the blades are a custom type...

These snips are actually quite easy to use... their not that bad. I can see why MK loves them :)

I'm not going to do the 3x120 yet, really want to do it with the 120mm Holesaw and dremel.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Youll never get a 120mm holesaw much cheaper. And do you even have a pillar drill to use it on?

Only thing with tin snips is that they tend to bend the metal slightly.

You could also consider picking up a cheap jigsaw, (like £15) with some metal blades and just thrash the live out of it, lol.

We did that for the kitchen worktop at our old place. It then died on us shortly after, so we got a full refund :D
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
I can get a 121mm one for £8... That's pretty cheap - to me.

And i have a good enough drill to do it with. I'm not spending £50 on a Pillar Drill for this one job...

We have a family friend doing quite abit of work on the house at the moment, if i need anything / advice, he's great.
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Done:



Just needs some filing now :)
 
Joined
Nov 26, 2008
Messages
458 (0.08/day)
Location
Bangalore, India
System Name Project [E]
Processor AMD Ryzen 3500x @ 4.2 Ghz
Motherboard Gigabyte B550 Aurous Pro
Cooling Air cooled
Memory 16 Gb Crucial Ballstix @ 3600 Mhz
Video Card(s) MSI RTX 3060
Storage 500 GB Crucial NVME, 500 GB Crucial Bx500
Display(s) 27" Acer 1440p
Case Caselabs
Audio Device(s) Onboard
Power Supply 1000 Watt Cooler Master Gold
Mouse Logitech
Keyboard TT Esports Mechanical
Software Windows 10
wow thats neat....may just get tin snips instead of getting a dremel as thats just what I want to do....thanks...
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
£8 for a 120mm hole saw wtf, linky plz! :eek:

And only reason I said pillar drill is cus something that big is going to be pretty hard to control, lol.

End up spinning you instead of the hole saw :roll:

Thought those tin snips look pretty darn good, especially if you can get ones to do a decent job going round curves.
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
I recommend these snips for straight lines, havn't tried the curved ones yet. But the dremel is great for corners.

Alex, sorry, £10
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
I recommend these snips for straight lines, havn't tried the curved ones yet. But the dremel is great for corners.

Alex, sorry, £10

Is that the hole "bit" tho, or just the saw itself?

These are considerably cheaper than i expected. I guess you can get light use ones aka, cheaper :D
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
No idea. I've stopped looking.

Going to wait till tomorrow for that stuff.
 
Joined
Feb 26, 2008
Messages
1,037 (0.18/day)
Location
London, England
System Name Le Don
Processor Core i 5 2500K Unlocked 3.3GHz HD Graphics 3000
Motherboard Asus P8P67 Pro B3 Revision Rev 3.1
Cooling Arctic Freezer Pro 7 Rev.2
Memory 8Gb Corsair DDR3 (CMZ8GX3M2B1600C9), 1600MHz, 1.5V, 9-9-9-24
Video Card(s) EVGA Signature 2 Super Clocked GTX680 2GB
Storage Total 6 TB storage
Display(s) LG 23" D2342P and LG 42" 42LF65 LCD (Wall mounted)
Case Antec P180 Silver
Audio Device(s) Audigy 2 ZS Platinum Pro
Power Supply Corsair 850HX
Software Windows 7 Ultimate 64-bit,
they are cheaper than ole B&Q. i read once that you don't need a 120mm holesaw as a 114mm will do just fine (in case you go wrong, you have a little leeway)
@alexp999, the dimensions quoted are the size of the saws.
and i second the motion regarding using a pillar drill or drill stand. but i also agree that buying one just for a one-time job is a little OTT. still, i could always do with more DIY equipment :p
there are alternatives to drilling the hole, i'd Dremel it with a LOT of time and patience
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Thats the thing, i dremeled the top.

This is an experiment for me, never worked with metal before, so i want to try different things.

On the top, i plan on doing a combination of dremel and holesaw.

Does anyone have a 120mm (or just less) holesaw that i can borrow?
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
The best thing to do is get an old case and practice drilling and cutting on it....

btw, 120mm (or just less) holesaws are really hard to find!:shadedshu
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
I see we use the same snips. Those are great!
 

Wetbehindtheears

New Member
Joined
Sep 8, 2006
Messages
270 (0.04/day)
Location
Salisbury UK
System Name Still ongoing
Processor i7 920 D0 @ 4.2GHz
Motherboard Gigabyte EX58-UD5
Cooling CoolerMaster V8 @ present
Memory 6Gb Crucial DDR3 PC3-8500 CL7
Video Card(s) 2xXFX 5770 in Crossfire
Storage 4x1Tb Sata
Display(s) 2407WFP
Case Modded Lian Li PC G70
Audio Device(s) Onboard
Power Supply Antec Quattro 1000
Software Win 7 x86 and x64
Benchmark Scores SuperPi 1M - 8.83s Fastest - 4.66GHz on Air!
Last edited:
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Yea, i saw that site, but wasn't sure.

I think i'll just spent a day dremeling and get everything cut...

Can't to it now though, tis throwing it down :(
 
Joined
Aug 7, 2008
Messages
5,739 (1.00/day)
Location
Wakefield, UK
Tut... English weather....

Got a delivery from ebuyer coming however. Should be fun routing 2 more 15m ethernet cables round the house ... lol
 
Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Tut... English weather....

Got a delivery from ebuyer coming however. Should be fun routing 2 more 15m ethernet cables round the house ... lol

after 4 years in Sheffield I had seen all the rain I could take....
Now, after 10 years in Greece.... I have had enough of the high temps and actually miss English weather.....

...good luck dremmeling!:toast:
 
K

kyle2020

Guest
haha. Have the joy of starting afresh on my AAKS, and a can of compressed air (when they arrive). First use? spray air into my mouth to make my cheeks go mad :D
 
Top