• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Mouses and Mouse interfaces

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,853 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
I prefure PS/2 mouses my self but my need for multi button and left handed mice pushes me into having a USB mouse.

Speed wise i've never been happier with a USB mouse. Only think that bothered me with USB don't matter what brand i find them not booting up once in 20-30 comp reboots but all ways been easy to solve by replugging it in.

Overall i do think USB mice as better due to my requirements and i enjoy the 1600DPI.
 

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,853 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.

Mediocre

New Member
Joined
Jun 11, 2006
Messages
1,237 (0.19/day)
Processor C2D E8400 @ 3.60GHz
Motherboard ASUS P5Q-Pro w/ extra Vreg HS
Cooling Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side)
Memory 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6)
Video Card(s) EVGA 9800GTX+
Storage 3 x 80 GB WD SATA300 (2x RAID 0)
Display(s) Scepter x37 1080p 37" LCD & Samsung 204B
Case CoolerMaster HAF932
Audio Device(s) Onboard
Power Supply Mushkin HP-580AP (C/O TPU!)
Software Vista Ultimate (32-bit)
FYI my P35 board does NOT have a mouse PS2 port. Only a keyboard PS2 port (and a USB port above that where the mouse port usually is)...

A sign of things to come?
 
Joined
Nov 8, 2006
Messages
5,052 (0.80/day)
Location
Manchester, United Kingdom
Processor AMD FX 8320 @ 4GHz
Motherboard Gigabyte GA-990FXA-UD5 rev1
Cooling Corsair H70
Memory 4 x 4GB DDR3 Ripjawz 1600Mhz
Video Card(s) Sapphire Vapor-X AMD R9 280X
Storage 1 x 500GB Samsung Evo 850, 1 x 500GB Vrap Data Drive, 3 x 2TB Seagate, 1 x 1TB Samsung F1
Display(s) 3 x DGM IPS-2402WDH
Case Coolermaster HAF X
Audio Device(s) Onboard
Power Supply Coolermaster 1000W Silent Pro M
Mouse Logitech G502
Keyboard Logitech G510
Software Windows 10 Pro x64
You are sort of correct. Yes PS/2 has higher sampling rate (200 over 125) as standard, but with USB that can be increased to 500 or 1000.

Also you can't use more than 3 buttons on a PS/2 mouse (plug in a 5 button USB mouse with a converter and try and use the extra buttons).

A lot of older boards have MAJOR problems when you only have a USB mouse as they just don't detect it on boot-up and require BIOS flashes to do so.

However, I prefer USB mice, a lot more variety and customisation is possible.

And yes, there is also Serial Mice, but they are worse than PS/2 so don't even consider them.
 
Joined
Nov 8, 2006
Messages
5,052 (0.80/day)
Location
Manchester, United Kingdom
Processor AMD FX 8320 @ 4GHz
Motherboard Gigabyte GA-990FXA-UD5 rev1
Cooling Corsair H70
Memory 4 x 4GB DDR3 Ripjawz 1600Mhz
Video Card(s) Sapphire Vapor-X AMD R9 280X
Storage 1 x 500GB Samsung Evo 850, 1 x 500GB Vrap Data Drive, 3 x 2TB Seagate, 1 x 1TB Samsung F1
Display(s) 3 x DGM IPS-2402WDH
Case Coolermaster HAF X
Audio Device(s) Onboard
Power Supply Coolermaster 1000W Silent Pro M
Mouse Logitech G502
Keyboard Logitech G510
Software Windows 10 Pro x64
but isn't there a disadvantage that a USB mouse requires special driver for extra buttons ? does it also require the special driver for the standard (3) buttons ?

No. Although I'm assuming that's only with XP upwards. I've not installed any drivers for my Logitech G5 and I can use the extra 2 buttons.
 

KennyT772

New Member
Joined
Dec 21, 2005
Messages
3,572 (0.54/day)
System Name Raptor
Processor Intel E8400 Wolfdale @3600
Motherboard Asus P5Q-Pro LGA775
Cooling Zalman CNPS9700
Memory 1024mbx2 Crucial Ballistix DDR800
Video Card(s) XFX 9600GT
Storage Seagate 7200.11 500GB
Display(s) Acer AL2216Wbd and Acer AL1717
Case Gigabyte 3DAurora Black
Audio Device(s) Creative X-Fi Extreme Gamer Faitality
Power Supply OCZ GameXStream 500w
USB mice are better, they have faster data speeds and lower latency. Polling rate is adustible although someone pointless. optical firmware makes a much larger impact. USB mice are favored as they can be hot swapped, and are also cheaper to produce.

As for this rumor about ps/2 being faster and dedicated, its false. As long as you aren't using a mouse on a USB hub with while moving files through it you will have better performance with a USB.
 

Shyska

New Member
Joined
Sep 7, 2005
Messages
158 (0.02/day)
Processor AMD Athlon64 3000+ Venice @2.5GHz
Motherboard Asus A8N-E :(this board limits my cpu overclock ):
Cooling CPU box, GPU Zalman VF700-Cu
Memory 2x512MB PC3200 @227MHz
Video Card(s) Sapphire X850XT 256MB PCI-E @ 605/618
Storage 40GB & 120GB Maxtors
Power Supply Generic 400W
Software Windows XP Pro SP2 | Debian GNU/Linux <sarge>
Also you can't use more than 3 buttons on a PS/2 mouse (plug in a 5 button USB mouse with a converter and try and use the extra buttons).

My mouse (pics below, you can see it is rubbed a lot there and there, cause i simply love it :toast: ) has 5 buttons working like a charm on Windows XP and Vista Ultimate with generic Windows drivers without any additional programs.

Unfortunately i have no idea what make/model it is as i got it as spare part from a laptop (i think).




 
Joined
Nov 8, 2006
Messages
5,052 (0.80/day)
Location
Manchester, United Kingdom
Processor AMD FX 8320 @ 4GHz
Motherboard Gigabyte GA-990FXA-UD5 rev1
Cooling Corsair H70
Memory 4 x 4GB DDR3 Ripjawz 1600Mhz
Video Card(s) Sapphire Vapor-X AMD R9 280X
Storage 1 x 500GB Samsung Evo 850, 1 x 500GB Vrap Data Drive, 3 x 2TB Seagate, 1 x 1TB Samsung F1
Display(s) 3 x DGM IPS-2402WDH
Case Coolermaster HAF X
Audio Device(s) Onboard
Power Supply Coolermaster 1000W Silent Pro M
Mouse Logitech G502
Keyboard Logitech G510
Software Windows 10 Pro x64
My mouse (pics below, you can see it is rubbed a lot there and there, cause i simply love it :toast: ) has 5 buttons working like a charm on Windows XP and Vista Ultimate with generic Windows drivers without any additional programs.

Unfortunately i have no idea what make/model it is as i got it as spare part from a laptop (i think).

Now that I did not know...everytime I've tried the extra buttons have never registered...
 
Top