- Joined
- May 22, 2023
- Messages
- 26 (0.08/day)
- Location
- In the virtual world
| Processor | Intel Xeon E3-1270 v3 |
|---|---|
| Motherboard | Lenovo ThinkServer TS140 |
| Cooling | DeepCool AK400 WH |
| Memory | 32GB A-TECH 4x8GB DDR3-1600 RAM |
| Video Card(s) | XFX SWFT210 AMD Radeon RX 6600 |
| Storage | 500GB Samsung 860 Evo, 250GB Crucial MX500, 2x 2TB WD Red NASWare 2.0 |
| Display(s) | Dell ST2220L, Samsung S22F350 |
| Case | Corsair 4000D Airflow |
| Audio Device(s) | AirPods Pro 1, Audio-Technica ATH-M50 |
| Power Supply | Corsair CX650M (2021) |
| Mouse | Razer DeathAdder V2 Mini |
| Keyboard | CoolerMaster QuickFire Rapid |
| VR HMD | Oculus Quest 2, Samsung Gear VR |
| Software | Windows 11 Pro Insider (Canary channel) |
Hey, so I have a MSI Z97S SLI Krait Edition and it doesn’t power on at all besides running fans when turned on.
I’ve tried both with my Xeon E3-1225 v3, 32GB RAM, RX 6600 and a Corsair CX650M (2021), as well as with a i5-4590T, 4GB RAM, and a R5 240 with a Dell PSU.
I’ve tried resetting the CMOS, I’ve looked for bent pins, but I just can’t get it to display anything. It doesn’t beep or have any lights either besides when I reset the CMOS, but the fans will run.
I’ve tried both PCIe slots and outside of the case as well. Even trying the iGPU doesn’t work.
Any solution?
I’ve tried both with my Xeon E3-1225 v3, 32GB RAM, RX 6600 and a Corsair CX650M (2021), as well as with a i5-4590T, 4GB RAM, and a R5 240 with a Dell PSU.
I’ve tried resetting the CMOS, I’ve looked for bent pins, but I just can’t get it to display anything. It doesn’t beep or have any lights either besides when I reset the CMOS, but the fans will run.
I’ve tried both PCIe slots and outside of the case as well. Even trying the iGPU doesn’t work.
Any solution?
