- Joined
- Feb 19, 2009
- Messages
- 1,828 (0.33/day)
- Location
- UK Warwickshire
| System Name | PC-Chips |
|---|---|
| Processor | Ryzen 5 5600x |
| Motherboard | Asus ROG Strix B550-F Gaming. |
| Cooling | Thermalright Peerless Assassin 120 SE CPU Air Cooler 6 heat pipes. |
| Memory | Patriot Viper 32gig dual channel 3600mhz |
| Video Card(s) | PowerColor HellHound RX 7900 GRE OC |
| Storage | 2X Samsung 860 EVO SSD's 500gig / 2TB crucial P3-NVME / WD-BLUE SN550 1TB M.2 / SP A55 512gig |
| Display(s) | Panasonic 40-inch 4k TV |
| Case | Modded NZXT H510 |
| Audio Device(s) | Realtek S1220A - Yamaha A-S501 AMP - 4 x Wharfedale diamond 9.1 speakers - Wharfedale SW150 sub |
| Power Supply | EVGA SuperNOVA G6 750W 80+ Gold |
| Mouse | Some cheap wireless thing |
| Keyboard | Razer Cynosa lite |
| VR HMD | Oculus Quest 2 128gig version |
| Software | Windows 11 pro 64bit |
Hi all i have been given a few spare pc parts and one of these parts is a Multi card reader, Its out of an old compaq pc.
Now i have never bothered with anything like this before and i have no idea if i can even get it working in my pc... (This is where i need your help hehe).
Would i be right in thinking the connection on this thing is universal? and runs maybe of a usb connector on my mobo? or do i need some sort of dedicated thing to plug it into.
From what i can see there are 4 main wires so im guessing they would be named simler to this (VCC / DX- / DX+ / GND. << this is the layout and names that are given in my mobo book for usb.
VCC is pin 1 / DX- pin 3 / DX+ pin 5 / GND pin 7..
Basicly im asking if there is anyway to get it working.
Thanks for any replies
Now i have never bothered with anything like this before and i have no idea if i can even get it working in my pc... (This is where i need your help hehe).
Would i be right in thinking the connection on this thing is universal? and runs maybe of a usb connector on my mobo? or do i need some sort of dedicated thing to plug it into.
From what i can see there are 4 main wires so im guessing they would be named simler to this (VCC / DX- / DX+ / GND. << this is the layout and names that are given in my mobo book for usb.
VCC is pin 1 / DX- pin 3 / DX+ pin 5 / GND pin 7..
Basicly im asking if there is anyway to get it working.
Thanks for any replies
Last edited:
