• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Mushkin Support Thread

Zebbo

Mushkin Tech Rep
Joined
Sep 11, 2004
Messages
131 (0.02/day)
Location
End of the Redline
XP3200 2-2-2

Works at DDR400 with tight timings and by loosening timings up to 2,5-3-3 they usually hit +260MHz. Potential is there if you happen to need it.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
exellent thnx so much that will do wondefully
 

steelballzz

New Member
Joined
Feb 3, 2006
Messages
1 (0.00/day)
hello
i hope i am in the right place
here it goes

i just got my 3rd pair of redlines 4000 after 5,5 months waiting for the rma
slap the little monsters into the slots and run a few loops of memtest....all was ok so i went to remove the memory to shipp to the next owner.....and i was shocked
the heatspreaders just went off and the memory stayed in the slot......:eek:

brand new ones.....what am i suppose to do now

did i lost my warranty.......i didnt force anything.....the heatspreaders were loose

plz help me out on this

thnxs
 

Duonger

Mushkin U.S.A.
Joined
Oct 27, 2005
Messages
17 (0.00/day)
Location
Cali
steelballzz said:
hello
i hope i am in the right place
here it goes

i just got my 3rd pair of redlines 4000 after 5,5 months waiting for the rma
slap the little monsters into the slots and run a few loops of memtest....all was ok so i went to remove the memory to shipp to the next owner.....and i was shocked
the heatspreaders just went off and the memory stayed in the slot......:eek:

brand new ones.....what am i suppose to do now

did i lost my warranty.......i didnt force anything.....the heatspreaders were loose

plz help me out on this

thnxs

I think it might just be the thermal tape. we can swap it out for you. Sorry about the inconvenience.

Tom
 

D_o_S

Moderator
Joined
Aug 27, 2005
Messages
954 (0.14/day)
Processor AMD Opteron 144
Motherboard DFI Lanparty nF4 SLI-DR Expert
Cooling Watercooled - Alphacool Nexxxos XP, BIX2, Eheim HPPS
Memory 2x 512MB OCZ PC 3200EL Platinum Rev.2 (TCCD)
Video Card(s) 2x Gainward GeForce 6800 Ultra (430/1200)
Storage 4x WD Raptor 740GD in RAID 0
Display(s) Eizo FlexScan L768
Case CM Stacker
Audio Device(s) Audigy 2
Power Supply Silverstone Zeus ST65ZF
Hi,

Around 1/2 year back, I purchased some Mushkin Redline XP4000. On the blister pack, it says 1GB XP4000 Redline.... what chips are these? TCCD or UTT? What V can I give them?

TIA
 

Duonger

Mushkin U.S.A.
Joined
Oct 27, 2005
Messages
17 (0.00/day)
Location
Cali
the 4000 were built with ch-utt chips. and speed bin to run at 4000.
 

D_o_S

Moderator
Joined
Aug 27, 2005
Messages
954 (0.14/day)
Processor AMD Opteron 144
Motherboard DFI Lanparty nF4 SLI-DR Expert
Cooling Watercooled - Alphacool Nexxxos XP, BIX2, Eheim HPPS
Memory 2x 512MB OCZ PC 3200EL Platinum Rev.2 (TCCD)
Video Card(s) 2x Gainward GeForce 6800 Ultra (430/1200)
Storage 4x WD Raptor 740GD in RAID 0
Display(s) Eizo FlexScan L768
Case CM Stacker
Audio Device(s) Audigy 2
Power Supply Silverstone Zeus ST65ZF
Duonger said:
the 4000 were built with ch-utt chips. and speed bin to run at 4000.

So 3.5V?
 

ryboto

New Member
Joined
Jan 6, 2005
Messages
289 (0.04/day)
Processor Opteron 170 [2.8ghz@1.4v|1.25ghz@1.025v]
Motherboard Abit AT8 32x
Cooling HR-03, TR Ultra-120, 3xScythe S-Flex
Memory 2gb Crucial Ballistix PC4000
Video Card(s) Ati Radeon X1950 pro
Storage 150 GB WD Raptor/500GB WD
Display(s) Acer AL2032WA 20'' Widescreen LCD
Case Lian Li PC-A05b
Audio Device(s) On board Audio/Plantronics USB Headset
Power Supply Enermax NoiseTaker EG495AX-VE 485W
Software Windows XP SP2 bblean shell/Ubuntu
I already got a reply from Mushkin cust. support, but, when can we expect to see DDR2-800 modules available? I plan on upgrading to an AM2 socket system when the low power X2's come out, and I'd love to stick with mushkin for my next memory purchase..
 
Joined
May 28, 2005
Messages
4,994 (0.73/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
think you mean ddr2-8000 = 1ghz :D

Hey, would it be possible to get mushkin pc2-8000 to review when it's released? Hopefully i'll be getting some corsair pc2-8500, and some ocz pc2-8000 ro review soon, and i'd love to get some mushkin memory to put through it's paces. Do you know when it will be released?
 
Last edited:

ryboto

New Member
Joined
Jan 6, 2005
Messages
289 (0.04/day)
Processor Opteron 170 [2.8ghz@1.4v|1.25ghz@1.025v]
Motherboard Abit AT8 32x
Cooling HR-03, TR Ultra-120, 3xScythe S-Flex
Memory 2gb Crucial Ballistix PC4000
Video Card(s) Ati Radeon X1950 pro
Storage 150 GB WD Raptor/500GB WD
Display(s) Acer AL2032WA 20'' Widescreen LCD
Case Lian Li PC-A05b
Audio Device(s) On board Audio/Plantronics USB Headset
Power Supply Enermax NoiseTaker EG495AX-VE 485W
Software Windows XP SP2 bblean shell/Ubuntu
infrared said:
think you mean ddr2-8000 = 1ghz :D
are you joking? PC6400(ddr2-800)
 

Zebbo

Mushkin Tech Rep
Joined
Sep 11, 2004
Messages
131 (0.02/day)
Location
End of the Redline

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
hey zebbo, just thought id big it up to a fellow mushkin tech rep :D
 

Zebbo

Mushkin Tech Rep
Joined
Sep 11, 2004
Messages
131 (0.02/day)
Location
End of the Redline
Ketxxx said:
hey zebbo, just thought id big it up to a fellow mushkin tech rep :D

Welcome friend :toast:
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.

Jimmy 2004

New Member
Joined
Jan 15, 2005
Messages
5,458 (0.78/day)
Location
England
System Name Jimmy 2004's PC
Processor S754 AMD Athlon64 3200+ @ 2640MHz
Motherboard ASUS K8N
Cooling AC Freezer 64 Pro + Zalman VF1000 + 5x120mm Antec TriCool Case Fans
Memory 1GB Kingston PC3200 (2x512MB)
Video Card(s) Saphire 256MB X800 GTO @ 450MHz/560MHz (Core/Memory)
Storage 500GB Western Digital SATA II + 80GB Maxtor DiamondMax SATA
Display(s) Digimate 17" TFT (1280x1024)
Case Antec P182
Audio Device(s) Audigy 4 + Creative Inspire T7900 7.1 Speakers
Power Supply Corsair HX520W
Software Windows XP Home
Better edit your starting post to add Ketxxx then Zebbo?!
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
Its cool, I stand out a bit more now I got a pic of me up :cool:
 

dj_dn

New Member
Joined
Mar 20, 2006
Messages
101 (0.02/day)
Location
Canada, QC, Gatineau
Ram prob

Hi I own a pair of Mushkin XP PC4000 2GB kit. The problem here is that I can’t run it at 2.8volts because I own an ASRock 939Dual-SATA2 and the max voltage for it is 2.7volts. When I don’t OC my processor I can (DDR 400 on both CPU and ram, with 3-4-3-8 1T) run memtest86+ for 8 hours (I shut it down). I know it’s not my CPU its Opteron 165 stepping CCBBE 0610 (runs Prime 95 for 8 hours at 2.7 GHz, fsb 300 with ram divider because of low voltage). My CPU never goes over 49C under load idle at 35.

So my question is, until I hard mod my mobo for 2.85volts, what speed and timings should I run it at when at 2.7 volts because at ddr 500 with stock timings the computer locks up at random times even when I am doing nothing to hard for the computer, browsing and listening to music.

At the same time are my rails normal under load, see pic.

Ill be back with full results of every test I am doing.
 

Attachments

  • load2.JPG
    load2.JPG
    139.1 KB · Views: 726
Last edited:

Zebbo

Mushkin Tech Rep
Joined
Sep 11, 2004
Messages
131 (0.02/day)
Location
End of the Redline
I replied into your other thread as well but I can clarify it more here.

The issue is Command Per Clock and AsRock board you have is known to have problems with it. Command rate however is not a memory timing you have used to seen (CAS, TRCD, TRP and so on), but its timing used to control latency on the memory controller. If you want to go with 1T, I'm afraid you would have to get a new motherboard.

For UCCC overclocking in most cases best overclocks has been seen with 2.65-2.75V and 2.8V does nothing else but decreases the OC. Try to start from 2.6V and make your way up from there.
 

bchivers

New Member
Joined
Jun 17, 2006
Messages
128 (0.02/day)
Location
T.N. USA.
Processor Opteron165 CCBBE 0610 DPMW
Motherboard DFI LanParty NF4 Ultra-D
Cooling Artic Freezer64 PRO
Memory Patriot PDC2G4000ELK
Video Card(s) HIS X1800GTO IceQ3 Turbo
Storage 2-36GB Raptors Raid0
Display(s) 19" Sony With X-Brite
Case Ultra Aluminus Silver
Audio Device(s) On board
Power Supply OCZ GameXStream 700W
Software XP.Pro.W/SP.2
I have Mushkin PC3200 LII V2 1GB XP3200 (2x512) in slots 1 and 2 on a MSI K8N Neo4 Platinum nForce4 Ultra board. I can't run at stock timmings I have to use 2.5-4-4-8 @ 1T and 2.75 or 2.8 volts (I think), don't know if it is the board or the ram. I have been thinking about switiching to a dfi lanparty ut nf4 ultra d do you think it would run any better on this board?:toast:
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
Try 2.8v vdimm and check for any bios updates for your board. if you list all current memory settings we can help more ;)
 

bchivers

New Member
Joined
Jun 17, 2006
Messages
128 (0.02/day)
Location
T.N. USA.
Processor Opteron165 CCBBE 0610 DPMW
Motherboard DFI LanParty NF4 Ultra-D
Cooling Artic Freezer64 PRO
Memory Patriot PDC2G4000ELK
Video Card(s) HIS X1800GTO IceQ3 Turbo
Storage 2-36GB Raptors Raid0
Display(s) 19" Sony With X-Brite
Case Ultra Aluminus Silver
Audio Device(s) On board
Power Supply OCZ GameXStream 700W
Software XP.Pro.W/SP.2
Ketxxx said:
Try 2.8v vdimm and check for any bios updates for your board. if you list all current memory settings we can help more ;)
Tried 2.8v, I do have the latest bios and not sure what you mean by "if you list all current memory settings". Would that be 2.5-4-4-8?
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
if you look in your bios you will find something with a heading like "memory timings" or "dram paramaters" or something like that, enter that page and thats what i mean by current memory timings ;)
 

bchivers

New Member
Joined
Jun 17, 2006
Messages
128 (0.02/day)
Location
T.N. USA.
Processor Opteron165 CCBBE 0610 DPMW
Motherboard DFI LanParty NF4 Ultra-D
Cooling Artic Freezer64 PRO
Memory Patriot PDC2G4000ELK
Video Card(s) HIS X1800GTO IceQ3 Turbo
Storage 2-36GB Raptors Raid0
Display(s) 19" Sony With X-Brite
Case Ultra Aluminus Silver
Audio Device(s) On board
Power Supply OCZ GameXStream 700W
Software XP.Pro.W/SP.2
Here's what I could find.
2.5-4-4-8
TRC12
TRFC24t
TRRD - Auto
1T
Read preable value - 6ns
Async latency - 6ns.
 

bchivers

New Member
Joined
Jun 17, 2006
Messages
128 (0.02/day)
Location
T.N. USA.
Processor Opteron165 CCBBE 0610 DPMW
Motherboard DFI LanParty NF4 Ultra-D
Cooling Artic Freezer64 PRO
Memory Patriot PDC2G4000ELK
Video Card(s) HIS X1800GTO IceQ3 Turbo
Storage 2-36GB Raptors Raid0
Display(s) 19" Sony With X-Brite
Case Ultra Aluminus Silver
Audio Device(s) On board
Power Supply OCZ GameXStream 700W
Software XP.Pro.W/SP.2
bchivers said:
Here's what I could find.
2.5-4-4-8
TRC12
TRFC24t
TRRD - Auto
1T
Read preable value - 6ns
Async latency - 6ns.
If you need something else let me know, Thanks.:toast:
 

Zebbo

Mushkin Tech Rep
Joined
Sep 11, 2004
Messages
131 (0.02/day)
Location
End of the Redline
I assume he meant alpha timings: Trrd, Twr, Twtr, Trwt + other memory settings.

If I remember right MSI K8N Neo4 has those available in BIOS.

If you can, download CPU-Z and check you are using correct memory slots and that memory is in dual channel mode.
 
Top