- Joined
- Feb 5, 2009
- Messages
- 888 (0.16/day)
System Name | Serenity |
---|---|
Processor | Intel i7-4770K |
Motherboard | Asus Maximus VI Hero |
Cooling | Xigmatek Dark Knight II SD1283 |
Memory | 16GB Kingston DDR3 |
Video Card(s) | Gigabyte GTX 770 4GB |
Storage | 2x Samsung 840 Pro 256GB SSDs, RAID0 |
Display(s) | 2x 27" Samsung curved |
Case | Coolermaster HAF 932 |
Audio Device(s) | HT Omega Striker 7.1 |
Power Supply | Thermaltake 1200w |
Software | Windows 10 Pro 64-bit |
Aspire and jbunch have been helping me out, so I want to get a general consensus of what they've helped me put together. I'll be getting most of it through Sidewinder, since they are a bit cheaper, but some stuff I have to get through Petras.
The RX360 is sold out everywhere for like a month. I'm not building it until April anyway when the 955 comes out, so I'll wait for the RX360. The rad is the only item not on the list.
This will be going on an Asus M4A79-T and a Phenom X4 955 when they come out.
Here is what I have so far. Any changes you would make?
D-TEK FuZion v2 x2 High Flow Dtek 1/2 ID fittings (Default)
Swiftech MCRES Micro Revision 2 reservoir
5x Scythe SFF21F 63 CFM S-FLEX, three for the rad, two in case I need another 120 or 240 rad after cooling two gpus and cpu. (to go on a sunbeam fan controller)
Swiftech MCP355 12v DC Pump
XSPC Laing DDC Top with x2 DTek High Flow 1/4 BSPP to 1/2. ID Barb
Petra'sTech "Gel-Stuff" Vibration Absorption Block
Petra'sTech PT_Nuke -PHN Concentrated Biocide
2x Swiftech MCW60-R2 GPU Waterblock for the 4850X2
20x Herbie Clip® Nylon Hose Clamp Size H - Blue
15ft Tygon R3603 1/2in. ID 3/4in. OD Laboratory Tubing
Logisys Dual UV 12 in. CCFL Light Kit
Feser View - Active UV Dye - UV Blue
Will be using distilled water.
Thanks for any help.
The RX360 is sold out everywhere for like a month. I'm not building it until April anyway when the 955 comes out, so I'll wait for the RX360. The rad is the only item not on the list.
This will be going on an Asus M4A79-T and a Phenom X4 955 when they come out.
Here is what I have so far. Any changes you would make?
D-TEK FuZion v2 x2 High Flow Dtek 1/2 ID fittings (Default)
Swiftech MCRES Micro Revision 2 reservoir
5x Scythe SFF21F 63 CFM S-FLEX, three for the rad, two in case I need another 120 or 240 rad after cooling two gpus and cpu. (to go on a sunbeam fan controller)
Swiftech MCP355 12v DC Pump
XSPC Laing DDC Top with x2 DTek High Flow 1/4 BSPP to 1/2. ID Barb
Petra'sTech "Gel-Stuff" Vibration Absorption Block
Petra'sTech PT_Nuke -PHN Concentrated Biocide
2x Swiftech MCW60-R2 GPU Waterblock for the 4850X2
20x Herbie Clip® Nylon Hose Clamp Size H - Blue
15ft Tygon R3603 1/2in. ID 3/4in. OD Laboratory Tubing
Logisys Dual UV 12 in. CCFL Light Kit
Feser View - Active UV Dye - UV Blue
Will be using distilled water.
Thanks for any help.