• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Naturally Aspired PC WaterCooling Club

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.67/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM
CFM is pretty much useless, pressure is where it's at ;)
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
CFM is pretty much useless, pressure is where it's at ;)

Regardless, those fans won't be very good for rad use.

And D, you have to realize that test was with a dual core. The differences will be much greater with a higher heat load.
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
Says Quad


My CPU is under deep freeze tho, the rad would just be for video cards.




Wile do you think I need those fittings? I think I do.....
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Says Quad


My CPU is under deep freeze tho, the rad would just be for video cards.




Wile do you think I need those fittings? I think I do.....

Hmmm, must've been thinking of another review.

Anyway, yeah you should get something to connect the blocks together to make it easier. Koolance has some nice ones.
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
will they fit?

I don't know about threadng.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
I dunno. Haven't really looked into it yet.
 

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
subscribing building my 1st H2O setup :D
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (0.99/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
Welcome to the thread. Let us know how things go! :toast:
i figure this would be the place to ask i think i fit to BIX 240 in the front of my case would fans-rad-fans-rad-fans work?
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
i figure this would be the place to ask i think i fit to BIX 240 in the front of my case would fans-rad-fans-rad-fans work?

You'd lose some efficiency. The air will pick up some heat from the first rad, and blow thru the second rad.
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
You'd lose some efficiency. The air will pick up some heat from the first rad, and blow thru the second rad.

so if i did do that it would be better to run the loop through the 2nd rad 1st?
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
I would not tie them together in either case, but I see what you are saying just heat up one rad two times with the last one should be the coldest and then though the system.

It could work, you would just have to try and see.





What do you guys think of my idea lol

pump at 17v, then 3 gpu blocks, hits the 480 rad, then into another 17v pump, and finally going into a bay res before hitting the other pump again.
 

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
What do you guys think of my idea lol

pump at 17v, then 3 gpu blocks, hits the 480 rad, then into another 17v pump, and finally going into a bay res before hitting the other pump again.
:confused: im planning on going res.>pump>rad>blocks>pump>res. or res.>pump>blocks>pump>rad>res.
 

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
pump at 17v, then 3 gpu blocks, hits the 480 rad, then into another 17v pump, and finally going into a bay res before hitting the other pump again.
My thought is if thats a 12V rated pump its lifespan is gonna be shortlived.
 
Joined
Feb 7, 2008
Messages
682 (0.12/day)
Location
Barcelona, Catalonia, Spain
System Name The Phoenix (rev. 3.0)
Processor Intel Core i9 9900K @ 4.9GHz (1.18V)
Motherboard ASUS TUF Z390 PRO-GAMING
Cooling Custom Full Loop w/EKWB & Swiftech components
Memory 32GB Corsair Vengeance RGB Pro 3200MHz (C15)
Video Card(s) MSI GTX 1080 SeaHawk X EK @ 2.15GHz/5.5GHz
Storage Samsung 970 EVO+ (2x500GB) + Toshiba X300 (4TB)
Display(s) LG 29UM65-P (2560x1080 @ 75 Hz)
Case Thermaltake Core V51
Audio Device(s) Razer Kraken 7.1 & Scarlett 2i4 w/M-AUDIO BX5-D2
Power Supply Corsair RM750 (ver. 2019)
Mouse Logitech G700s
Keyboard Razer Blackwidow Chroma V2
Software MacOS 10.13.6 "High Sierra" & Windows 10 Pro x64
Since one month and a half my loop is like this: res->pump->block->double rad->single rad->res

In my case it was far better than one single rad, i won more than 8-10ºC with both together (back-to-back) in front to the usual 4-6ºC you're used to see when you change from a single to a double rad, and maybe i could run a cpu + gpu block's when i improve my pump.

Here's how i planned the loop:



The result with the new P45 mobo (i have to clean it all a lil bit as well as manage better the cables but this mobo is not the best for that, at least the "Pro" version):



:toast:
 
Last edited:

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
My thought is if thats a 12V rated pump its lifespan is gonna be shortlived.

My thoughts exactly. Not only that, but 17V could possibly cause a bit of heat dump, negating any benefit of the higher pressure and flow.
 

EastCoasthandle

New Member
Joined
Apr 21, 2005
Messages
6,885 (0.99/day)
System Name MY PC
Processor E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard Maximus Formula
Cooling D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory XMS 8500C5D @ 1066MHz
Video Card(s) HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage 2
Display(s) 24"
Case P180
Audio Device(s) X-fi Plantinum
Power Supply Silencer 750
Software XP Pro SP3 to Windows 7
Benchmark Scores This varies from one driver to another.
Since one month and a half my loop is like this: res->pump->block->double rad->single rad->res

In my case it was far better than one single rad, i won more than 8-10ºC with both together (back-to-back) in front to the usual 4-6ºC you're used to see when you change from a single to a double rad, and maybe i could run a cpu + gpu block's when i improve my pump.

Here's how i planned the loop:



The result with the new P45 mobo (i have to clean it all a lil bit as well as manage better the cables but this mobo is not the best for that, at least the "Pro" version):



:toast:

Nice :toast:
 

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
All right guys.. what are your thoughts on this matter?

 

intel igent

New Member
Joined
Jun 5, 2005
Messages
4,640 (0.67/day)
Location
Toronto, Canada
System Name old school / new school
Processor 3.0e C0 @ 3.6 / e5200
Motherboard p4p800e-dlx / p5q-DLX
Cooling custom water see sig / air
Memory 2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card(s) 3850AGP / 4890vaporX
Storage 36g raptor+120g wd / wd 1001fals 1tb
Display(s) BenQ / sharpAQUOS LC-37D64U
Case modded antec plusview / generic
Audio Device(s) audigy 2zs / ASUS Xonar HDAV1.3
Power Supply fan/cable modded powerstream 520 / OCZ 700mxsp
Software Xp pro SP2 / VISTA ultimate OEM
My thought is if thats a 12V rated pump its lifespan is gonna be shortlived.

IIRC D5 are rated 12-24v

WileE said:
My thoughts exactly. Not only that, but 17V could possibly cause a bit of heat dump, negating any benefit of the higher pressure and flow.

IMO the added heat dump will be negligible in his situation due to the 480 RAD

@ sirkeldon : looking good man! nice and tidy ;)

@ coldstorm : look's like a good list, only thing's i'd change are the RAD (swiftech mcr-320) and the fitting's (DD/bitspower fatboy's). good choice of tubing it's pliabillity will make it easy to slide over 1/2" barb's ;)

not shure if that fan controller will work with those fan's....
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
my new parts list please critique

cpu block: maze 4
pump: MCP655 variable (already have)
rad: hopefully dual BIX 240s (already have one)
res: Swiftech mini-res
barbs: Bitspower G1/4" 1/2" barbs all around
tubing: Tygon R3400 1/2in. ID 3/4in. OD (its the black kind)

i was also wondering is there anyway to water cool my mosfets?
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
My thought is if thats a 12V rated pump its lifespan is gonna be shortlived.

It is a 12v but they show graphs on what the pump will do at 24v. So I think that it can take the extra v to them.
 

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
Does the extra flow lower the temps (because dosent increasing the Volts/speed also increase the heat dump of the pump)

One other thing I am trying to figure is the faster water flows the more surface friction there is.
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
Does the extra flow lower the temps (because dosent increasing the Volts/speed also increase the heat dump of the pump)

One other thing I am trying to figure is the faster water flows the more surface friction there is.

It all depends on how big your run is. On smaller runs 17v could hurt you, but longer runs it could help you. If you rad is slowing the flow way down, running it faster can help temps as well.

It's something that needs to be played with to find out IMO.
 

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
thanks for the info
 
Top