I need help. My rig wont load, all it does is keeps going back to the post screen. the CPU,RAM,POWER,BOOT DEVICE LEDs all come on during post,none of them stay solid but the system won't load. What i have done: cleared CMOS with the jumper pulled PSU and battery,let it sit for ~4 hours tried 8 different sticks of ram 1 at a time flashed BIOS to the latest used onboard GPU used 2 different video cards(both PCI-e x16) tried a different psu(i used a 350w to load it the first time before i got the OCZ i was using,so i know it can loading it) I don't have it in a case but i have made sure nothing metal is under it, have put the board on the box it came in and a glass shelf. reseated CPU reseated heatsink blew out the mem slots checked for bent pins (none that i could see) checked for burnt spots on CPU any ideas of what else i can do? I want to get this rig back up and running again. when it stopped working i was in the BIOS trying to get a small overclock. didn't over volt anything either. If you need anymore info then ask away and i will answer as soon as i can.