p_o_s_pc
F@H&WCG addict
- Joined
- May 2, 2007
- Messages
- 13,006 (2.10/day)
- Location
- Newark ohio
| System Name | el'lappy|Cruncher | Cruncher 2 |
|---|---|
| Processor | intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz |
| Motherboard | some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3 |
| Cooling | dual 80mm cooling fan | WC'ing ) |cheapo |
| Memory | 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s |
| Video Card(s) | onboard | 60 1GB(hd7770 ) |8800GTS |
| Storage | Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD |
| Display(s) | 17in | 42" 1080P HD 3D TV |
| Case | lappy case | CM HAF XB |none yet |
| Audio Device(s) | onboard | onboard | onboard |
| Power Supply | Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon) |
| Software | Windows 7 Ult. 64bit---->-------> |
I need help. My rig wont load, all it does is keeps going back to the post screen.
the CPU,RAM,POWER,BOOT DEVICE LEDs all come on during post,none of them stay solid but the system won't load.
What i have done:
cleared CMOS with the jumper
pulled PSU and battery,let it sit for ~4 hours
tried 8 different sticks of ram 1 at a time
flashed BIOS to the latest
used onboard GPU
used 2 different video cards(both PCI-e x16)
tried a different psu(i used a 350w to load it the first time before i got the OCZ i was using,so i know it can loading it)
I don't have it in a case but i have made sure nothing metal is under it, have put the board on the box it came in and a glass shelf.
reseated CPU
reseated heatsink
blew out the mem slots
checked for bent pins (none that i could see)
checked for burnt spots on CPU
any ideas of what else i can do? I want to get this rig back up and running again.
when it stopped working i was in the BIOS trying to get a small overclock. didn't over volt anything either.
If you need anymore info then ask away and i will answer as soon as i can.
the CPU,RAM,POWER,BOOT DEVICE LEDs all come on during post,none of them stay solid but the system won't load.
What i have done:
cleared CMOS with the jumper
pulled PSU and battery,let it sit for ~4 hours
tried 8 different sticks of ram 1 at a time
flashed BIOS to the latest
used onboard GPU
used 2 different video cards(both PCI-e x16)
tried a different psu(i used a 350w to load it the first time before i got the OCZ i was using,so i know it can loading it)
I don't have it in a case but i have made sure nothing metal is under it, have put the board on the box it came in and a glass shelf.
reseated CPU
reseated heatsink
blew out the mem slots
checked for bent pins (none that i could see)
checked for burnt spots on CPU
any ideas of what else i can do? I want to get this rig back up and running again.
when it stopped working i was in the BIOS trying to get a small overclock. didn't over volt anything either.
If you need anymore info then ask away and i will answer as soon as i can.
