• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Need help with Lan Party Adv Settings Terminology

MDK22

New Member
Joined
Jan 25, 2006
Messages
165 (0.04/day)
Likes
9
Location
Philadelphia, PA
System Name Heaven-Cf
Processor AMD Athlon 64 X2 5000+ BE Brisbane (215Mhz x15) 3.225Ghz 1.35v Rev BH-G2 8.5hrs prime stable
Motherboard Asus M2R32-MVP (2 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN, IEEE-1394)
Cooling Xigmatek HDT-S 1283 + AS5 Cpu, Stock GPU Fan, 2 80mm fans, 1 120mm 110CFM Silverstone 2 PSU fans
Memory OCZ ATI CrossFire 2GB (2 x 1GB) DDR2 800 400.3 MHz CPU/7 4-4-4-12-23 2T 1.9v
Video Card(s) POWERCOLOR AX4870 512MD5 Radeon HD 4870
Storage Seagate Barracuda 7200.10 (Perpendicular Recording) ST3250620AS (250 GB, 7200 RPM, SATA-II)
Display(s) Hanns-G HD191-D 2ms 700:1 16.2 million colors
Case APEVIA X-CRUISER-BK Black Steel ATX Mid Tower
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Professional
Power Supply PC Power & Cooling Silencer 750 EPS12V EPS12V 750W
Software XP Pro Tweaked
Benchmark Scores x1950xtx: 3d Mark 03/05/06 - 18467/11383/6478 | Super Pi 32MB 27m 8.110s
#1
I need some help with terminology and options. I am going to put down some options in LP bios and I was hoping to get some light shed on it.

CPU N/2 Ratio

CPU Clock0 Skew.......................0ps

Clockgen Voltage Control...............3.45V
SB Core/CPU PLL Voltage............. 1.55V

CPU VID Special Add...................+225.0mV

CPU GTL 0/2 REF Volt....................0.67X
CPU GTL 1/3 REF Volt....................0.67X

North Bridge GTL REF Volt .............0.58X

CPU Spread Spectrum.................Disabled
PCIE Spread Spectrum................Disabled

Also is the ps at the end of cpu clock0 skew stand for picoseconds?