-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
need help with oc-ing
- Thread starter beck92
- Start date
- Joined
- May 30, 2006
- Messages
- 7,628 (1.17/day)
- Location
- TX, USA
| Processor | Intel i7 4770K |
|---|---|
| Motherboard | Asrock |
| Cooling | Water |
| Memory | Team Xtreem LV 16GB (2x8GB) |
| Video Card(s) | EK Full WB HD7970 |
| Display(s) | CROSSOVER 27Q LED-P 27" |
| Case | Danger Den Torture Rack |
| Audio Device(s) | Onboard |
| Power Supply | CORSAIR Professional Series Gold AX1200 |
| Software | W 10 Pro |
what about SPD tab
- Joined
- May 30, 2006
- Messages
- 7,628 (1.17/day)
- Location
- TX, USA
| Processor | Intel i7 4770K |
|---|---|
| Motherboard | Asrock |
| Cooling | Water |
| Memory | Team Xtreem LV 16GB (2x8GB) |
| Video Card(s) | EK Full WB HD7970 |
| Display(s) | CROSSOVER 27Q LED-P 27" |
| Case | Danger Den Torture Rack |
| Audio Device(s) | Onboard |
| Power Supply | CORSAIR Professional Series Gold AX1200 |
| Software | W 10 Pro |
this one have you checked it yes lol
Attachments
-
zzz.jpg
p-jack
New Member
- Joined
- Jul 13, 2006
- Messages
- 333 (0.05/day)
- Location
- Arheilgen
| System Name | Ironjack |
|---|---|
| Processor | AMD Opteron 165 @ 2,4GHz, stock voltage |
| Motherboard | Asus A8N-E (nForce4 Ultra) |
| Cooling | Scythe Infinity, Thermalright HR-05SLI, AC AcceleroX1Rev.2 |
| Memory | 2x1024MB Patriot PC3200 @ 2,5-4-4-8 |
| Video Card(s) | Powercolor X1900XT 512MB @ stock clocks |
| Storage | 320GB Seagate ST3320620AS, 160GB Samsung HD160JJ |
| Display(s) | BenQ FP91GX 19" TFT |
| Case | Coolermaster Centurion 534 |
| Audio Device(s) | Realtek ALC850 (onboard) |
| Power Supply | Coolermaster iGreen 430W |
| Software | Ubuntu 6.10 + Windoofs XP |
tpu image uploader located here:
http://www.techpowerup.org/upload.php
p.s. when i said the temp sensor was "off" i meant that it probably is inaccurate... sry i should make myself more clear, but also i´m not a native english speaker...
http://www.techpowerup.org/upload.php
p.s. when i said the temp sensor was "off" i meant that it probably is inaccurate... sry i should make myself more clear, but also i´m not a native english speaker...
well here is the SPD
Module Size: 1024 Corection:none
max bandwitch: PC2-4300 (266 Mhz)
manufacturer: kingston
part number: KC6844-ELG37 EPP: NO
TIMING TABLES:
FREQUENCY 200 mhz 266 mhz 266 mhz
CAS# Latency 3.0 4.0 5.0
RAS# to CAS# 3 4 4
RAS precharge 3 4 4
tras 9 12 12
Trc 12 16 16
WELL now i have submittet my ram,SPD, motherboard and bios. So how much should i overclock each of these things? how do i do? what do i do if computer wont start after overclocking. how do i see the results after ocing.
BTW: when i look in CPU-Z THE core speed is almost all the time 1596 mhz and almost never 2394 mhz even though i have a duo 2,4 ghz processor is this normal?
Module Size: 1024 Corection:none
max bandwitch: PC2-4300 (266 Mhz)
manufacturer: kingston
part number: KC6844-ELG37 EPP: NO
TIMING TABLES:
FREQUENCY 200 mhz 266 mhz 266 mhz
CAS# Latency 3.0 4.0 5.0
RAS# to CAS# 3 4 4
RAS precharge 3 4 4
tras 9 12 12
Trc 12 16 16
WELL now i have submittet my ram,SPD, motherboard and bios. So how much should i overclock each of these things? how do i do? what do i do if computer wont start after overclocking. how do i see the results after ocing.
BTW: when i look in CPU-Z THE core speed is almost all the time 1596 mhz and almost never 2394 mhz even though i have a duo 2,4 ghz processor is this normal?
caveman_1990
New Member
- Joined
- Jan 22, 2007
- Messages
- 269 (0.04/day)
- Location
- Sydney, Australia
| Processor | Intel C2D E6600 [380fsb] 3.42Ghz (O.C) |
|---|---|
| Motherboard | ASUS Commando bios ver.1001 |
| Cooling | CPU :ZALMAN CNPS9500 WATERCOOL MOD CASE:120mm LED front,2X80mm exhast |
| Memory | A-DATA Vitesta DDR2 800(380mhz) with Pentium 3 HSF |
| Video Card(s) | SPARKLE 7950GT DIY HSF with 2X80mm fans oc'ed(core:600 mem:1600) |
| Storage | SAMSUNG SP2504C (250GB) |
| Display(s) | BENQ FP71G+ 17inch |
| Case | icute 0408SL series |
| Power Supply | cheap ~_~"" 500w |
| Software | FULL OF PORN |
BECK92 just click on the left of my box and there is a CONTACT WITH MSN just click on that and add me ok =)
- Joined
- May 30, 2006
- Messages
- 7,628 (1.17/day)
- Location
- TX, USA
| Processor | Intel i7 4770K |
|---|---|
| Motherboard | Asrock |
| Cooling | Water |
| Memory | Team Xtreem LV 16GB (2x8GB) |
| Video Card(s) | EK Full WB HD7970 |
| Display(s) | CROSSOVER 27Q LED-P 27" |
| Case | Danger Den Torture Rack |
| Audio Device(s) | Onboard |
| Power Supply | CORSAIR Professional Series Gold AX1200 |
| Software | W 10 Pro |
beck92 ur MEM is 533MHz, and on CPU-Z thats what I noticed with the 1.39v of CPU-Z is that it shows MULTIPLIER at the lower # and thats why the speed is lower when its does'nt have any load so its normal cuz mine is like that, and it better to Increase the BUS SPEED cuz with the MULTIPLIER at 9 since your ram is lower but since its a dell right ? your going have to do it in windows
PuMA
New Member
- Joined
- Jul 15, 2006
- Messages
- 724 (0.11/day)
- Location
- Finland
| Processor | lapped C2D e6850, 3600mhz |
|---|---|
| Motherboard | ASUS P5N32-E SLI (680i SLI) |
| Cooling | NOCTUA NH-U9, 3 2x120mm 1x180mm case fans |
| Memory | 6GB A-DATA vitesta DDR2 900mhz (2x1gb + 2x2gb) |
| Video Card(s) | LEASTEK GTX 260 (701/1408/1105) |
| Storage | SAMSUNG F1 640GB SATAII/SEAGATE 250gb SATAII |
| Display(s) | SAMSUNG 226BW 1680x1050 2ms |
| Case | ANTEC three hundred |
| Audio Device(s) | ASUS SupremeFX, SONY surround AMP |
| Power Supply | XION 630W |
| Software | VISTA ULTIMATE x64 |
| Benchmark Scores | 3dmark06:15126 (701/1408/1105) vantage: 11698 |
Intel's has this speed stepping option right?? u might want to turn it off if ur want to OC the right way
ok well i heard many ppl saying dell are hard to oc... is it because they got bad vent or what? how much do u ppl think i should increase my bus speed to?
if i take from 266 to 300 will there be any problems? overheat, or causing it to run unstable or any bad things?
if i take from 266 to 300 will there be any problems? overheat, or causing it to run unstable or any bad things?
omg omg!!! pressed f2 whilse starting computer and entered setup... once there it says none of these settings are changeable!!! CAN IT REALLY BE RIGHT??? its a dell and on another forum a guy said u couldnt overclock this processor!!!! WTF??? wtf should i do??
it cant be inpossible !! isnt there another place were i can change fsb??
it cant be inpossible !! isnt there another place were i can change fsb??
caveman_1990
New Member
- Joined
- Jan 22, 2007
- Messages
- 269 (0.04/day)
- Location
- Sydney, Australia
| Processor | Intel C2D E6600 [380fsb] 3.42Ghz (O.C) |
|---|---|
| Motherboard | ASUS Commando bios ver.1001 |
| Cooling | CPU :ZALMAN CNPS9500 WATERCOOL MOD CASE:120mm LED front,2X80mm exhast |
| Memory | A-DATA Vitesta DDR2 800(380mhz) with Pentium 3 HSF |
| Video Card(s) | SPARKLE 7950GT DIY HSF with 2X80mm fans oc'ed(core:600 mem:1600) |
| Storage | SAMSUNG SP2504C (250GB) |
| Display(s) | BENQ FP71G+ 17inch |
| Case | icute 0408SL series |
| Power Supply | cheap ~_~"" 500w |
| Software | FULL OF PORN |
The reason that you can't change your fsb or anyother setting e.g. vcore is because your BIOS (Basic input output system) doesn't support any of those setting. Many of the motherboard that is 3~4 years old doesn't support overclocking features.
There is 2 way to solve this problem:
1- Flash your BIOS but I wouldn't recommanded and I am not expert in flashing.
2- The easier way is just buy a new motherboard. When you buy a mother baord choose:
gigabyte
asus
msi
some intel board e.g bad axe 2
abit
BFG
DFI
and even some foxconn board they have become pretty good in oc'in recently.
When buying choose the one with an award BIOS and the more mb a BIOS has the more feature it have. e.g my board have 8MB most board have 4MB
There is 2 way to solve this problem:
1- Flash your BIOS but I wouldn't recommanded and I am not expert in flashing.
2- The easier way is just buy a new motherboard. When you buy a mother baord choose:
gigabyte
asus
msi
some intel board e.g bad axe 2
abit
BFG
DFI
and even some foxconn board they have become pretty good in oc'in recently.
When buying choose the one with an award BIOS and the more mb a BIOS has the more feature it have. e.g my board have 8MB most board have 4MB
- Joined
- Jan 19, 2007
- Messages
- 1,124 (0.18/day)
- Location
- Chicago
| Processor | Amd Ryzen 5 5600x kryonaut paste |
|---|---|
| Motherboard | Asus Prime X570 P bios 4021 |
| Cooling | Thermaltake Water 3.0 360mm (top mounted for exhaust) 3 Thermaltake 140mm riing rgb case fans |
| Memory | G.Skill Trident Z Neo DDR4 3600 cl16 2x16 dual rank |
| Video Card(s) | Sapphire Nitro+ RX 5700XT OC |
| Storage | Seagate Firecuda 520 500gb NVMe PCIE Gen4 x 4 boot drive XPG S70 Blade Gen 4 x 4 NVMe gaming drive |
| Display(s) | MSI Mag321CQR 32 inch curved 144 hz 1ms |
| Case | Thermaltake View 31 |
| Audio Device(s) | Corsair Void USB RGB Dolby Digital 7.1 Headphones |
| Power Supply | Thermaltake Grand RGB 750w |
| Mouse | Corsair Harpoon RGB |
| Keyboard | Corsair K55 RGB |
| Software | Windows 11 Professional |
Why did you buy a dell anyway?
caveman_1990
New Member
- Joined
- Jan 22, 2007
- Messages
- 269 (0.04/day)
- Location
- Sydney, Australia
| Processor | Intel C2D E6600 [380fsb] 3.42Ghz (O.C) |
|---|---|
| Motherboard | ASUS Commando bios ver.1001 |
| Cooling | CPU :ZALMAN CNPS9500 WATERCOOL MOD CASE:120mm LED front,2X80mm exhast |
| Memory | A-DATA Vitesta DDR2 800(380mhz) with Pentium 3 HSF |
| Video Card(s) | SPARKLE 7950GT DIY HSF with 2X80mm fans oc'ed(core:600 mem:1600) |
| Storage | SAMSUNG SP2504C (250GB) |
| Display(s) | BENQ FP71G+ 17inch |
| Case | icute 0408SL series |
| Power Supply | cheap ~_~"" 500w |
| Software | FULL OF PORN |
It doesn't matter when you bought it. The only thing that is stopping you from oc'ing is the motherboard and the BIOS. I can buy a motherboard which is 4 days ago and I still can't oc because the board is not manufactured for overclocking. Do you see what I mean Beck92?