- Joined
- Dec 27, 2007
- Messages
- 555 (0.09/day)
- Location
- Indiana
System Name | Evil Dragon |
---|---|
Processor | AMD FX-8320 Vishera @4.7ghz |
Motherboard | Asus 970 pro gaming Aura |
Cooling | Corsair Hydro Series H100i V2(fully Lapped). 4 40mm NB/VRM fans. 6 Thermaltake Riing 12 Series fans |
Memory | 2X8gig GeIL EVO Veloce Series DDR3 1600 @9.9.9.26 |
Video Card(s) | Powercolor Red Devil RX 480 (1400/2100) |
Storage | PNY XLR8 480gig SSD. Patriot Pyro SE 60gig SSD. |
Display(s) | ASUS VP228H LED |
Case | Thermaltake Core V31 |
Audio Device(s) | Onboard Realtek ALC1150 W/Creative Sound Blaster Cinema 2 |
Power Supply | EVGA 850 BQ 110 |
Keyboard | Roccat Isku FX |
Software | Win 10 Pro |
Today I finished building my new comp. I am now running a AMD Athlon 64 X2 5400 BE.
So, I do my initial boot up, get into Windows with no problems, and check everything (clock speed, timings, etc.). So, I decide to do some OC'ing. Now I have been told that by simply taking the multi to x16 (from x14 stock) will put me at 3.2 with no problems. Most said they didnt even have to do a volt increase. So I move it to 16, and reboot into Windows. I get a BSOD.
So, I figure, needs more volts. I take the volts to 1.35, and again restart. This time I get into Windows and start checking my timings, volts, temps, etc. Comp goes good for about 6-8 mins then restarts.
So, where am I going wrong here? Should I move the volts higher? Is a X16 multi too much?
Any help would be greatly appreciated!
So, I do my initial boot up, get into Windows with no problems, and check everything (clock speed, timings, etc.). So, I decide to do some OC'ing. Now I have been told that by simply taking the multi to x16 (from x14 stock) will put me at 3.2 with no problems. Most said they didnt even have to do a volt increase. So I move it to 16, and reboot into Windows. I get a BSOD.
So, I figure, needs more volts. I take the volts to 1.35, and again restart. This time I get into Windows and start checking my timings, volts, temps, etc. Comp goes good for about 6-8 mins then restarts.
So, where am I going wrong here? Should I move the volts higher? Is a X16 multi too much?
Any help would be greatly appreciated!