• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Need some help with disabling windows services

KBD

New Member
Joined
Feb 23, 2007
Messages
2,477 (0.40/day)
Location
The Rotten Big Apple
Processor Intel e8600 @ 4.9 Ghz
Motherboard DFI Lanparty DK X48-T2RSB Plus
Cooling Water
Memory 2GB (2 x 1GB) of Buffalo Firestix DDR2-1066
Video Card(s) MSI Radeon HD 4870 1GB OC (820/950) & tweaking
Storage 2x 74GB Velociraptors in RAID 0; 320 GB Barracuda 7200.10
Display(s) 22" Mitsubishi Diamond Pro 2070SB
Case Silverstone TJ09-BW
Audio Device(s) Creative X-Fi Titanium Fatal1ty Profesional
Power Supply Ultra X3 800W
Software Windows XP Pro w/ SP3
So i disabled some stupid services (print spooler, fast user switching, etc) in my Win Xp Pro. I did it by accesing msconfig and unchecking the stuff i don't want and applying and then i had to restart. After i get back into XP i get a pop up saying that Windows is in diagnostic & repair mode because i messed with msconfig. well, i don't think i want in that mode so i went to see if the services i disabled were stopped, they were, and in the general category i selected normal startup as opposed to Selective startup that XP defaulted to. After i rebooted all the services i disable are running again, so what am i doing wrong? :confused:
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Disabling the print spooler and fast user switching wouldn't make your machine do that. What else did you disable? The best way to disable services is Right click My Computer->Manage->Services. Right click on the service you want to disable and do it.:)
 

KBD

New Member
Joined
Feb 23, 2007
Messages
2,477 (0.40/day)
Location
The Rotten Big Apple
Processor Intel e8600 @ 4.9 Ghz
Motherboard DFI Lanparty DK X48-T2RSB Plus
Cooling Water
Memory 2GB (2 x 1GB) of Buffalo Firestix DDR2-1066
Video Card(s) MSI Radeon HD 4870 1GB OC (820/950) & tweaking
Storage 2x 74GB Velociraptors in RAID 0; 320 GB Barracuda 7200.10
Display(s) 22" Mitsubishi Diamond Pro 2070SB
Case Silverstone TJ09-BW
Audio Device(s) Creative X-Fi Titanium Fatal1ty Profesional
Power Supply Ultra X3 800W
Software Windows XP Pro w/ SP3
You know what, i think you are right. I didn't disable anyrhing critical. However, i do get occasional BSODs upon boot (a problem that i never could solve, i get a BSOD that says that my BIOS is not ACPI compliant) and it happened right after i disabled the services so that's why i got Diagnostic mode.

I'll try to do it throufg services in Admin Tools like u sed.
 
Joined
Jun 5, 2007
Messages
2,147 (0.35/day)
Location
Metro Manila, Philippines
System Name Zangief (Reborn)
Processor AMD Ryzen R7 1700X @ 3.825ghz , 1.35v
Motherboard Gigabyte GA-AX370 Gaming K7 Rev 1.0 BIOS F51e
Cooling Noctua NH-D15 Push / Push Config | 2x ML120 | 2x Phanteks 120 mm
Memory 2x8GB G.Skill Trident Z @ 3200mhz cl 16 @ 1.45v
Video Card(s) Gigabyte Aorus GTX 1080 +100 core / +550 mem
Storage 250 GB Samsung Evo 850 / 1tb WD Black / 4tb WD Blue / 512GB Adata XPG Pro SX8200
Display(s) Acer Predator XB271HU |Asus VX239H 23" AH-IPS Led
Case Phanteks Enthoo Pro M TG
Audio Device(s) On Board Realtek HD / Logitech G633/G933 Gaming Headset / Corsair H70 Pro Wireless
Power Supply Corsair HX750i
Mouse Logitech G903 and G602 Wireless Gaming | Logitech Proteus Core G502
Keyboard Corsair K70 Cherry Red | Corsair K70 RGB MK.2 Cherry Browns | Akko 3908N TTC Flame Reds
Software Windows 11 Pro
Hmmm use Run> Services.msc then disable services you don't need... There was a guide around here with optimizations for XP with some services that are ok to be turned off...
 

KBD

New Member
Joined
Feb 23, 2007
Messages
2,477 (0.40/day)
Location
The Rotten Big Apple
Processor Intel e8600 @ 4.9 Ghz
Motherboard DFI Lanparty DK X48-T2RSB Plus
Cooling Water
Memory 2GB (2 x 1GB) of Buffalo Firestix DDR2-1066
Video Card(s) MSI Radeon HD 4870 1GB OC (820/950) & tweaking
Storage 2x 74GB Velociraptors in RAID 0; 320 GB Barracuda 7200.10
Display(s) 22" Mitsubishi Diamond Pro 2070SB
Case Silverstone TJ09-BW
Audio Device(s) Creative X-Fi Titanium Fatal1ty Profesional
Power Supply Ultra X3 800W
Software Windows XP Pro w/ SP3
Thnx, i'm already using that guide.

Now i have a new problem, i used Services.msc to disable services i don't want (most of the services recomended to be disabled in that guide), i checked msconfig to make sure they have stopped and they have. However, after i reboot the machine some of them are running again according to msconfig. What am i doing wrong?

Disabling the print spooler and fast user switching wouldn't make your machine do that.QUOTE]

that's not entirely true from my recent experience. I get the Diagnostic & Repair mode message if i disable services in msconfig and then restart as recomended by XP. That doesn't happen if i do it via services.msc. And no, i didn't get that BSOD this time.
 
Top