- Joined
- Nov 12, 2011
- Messages
- 775 (0.17/day)
- Location
- UT,US
| System Name | Asrock 2012 |
|---|---|
| Processor | AMD Phenom II X4 965 Black Edition Deneb 3.4GHz |
| Motherboard | ASRock 970 PRO3 AM3 |
| Cooling | Corsair H70 for CPU |
| Memory | 64GB DDR3 1333mhz 16GBx4 |
| Video Card(s) | NVIDIA 1080 with stock fan |
| Storage | 1TB GIGABYTE SSD NVME PCIE 2.0 + Samsung SSD Evo 850 250GB with Ubuntu + Samsung SSD 860 500GB win7 |
| Display(s) | LG HDR 31.5" |
| Case | Big Black Tower |
| Audio Device(s) | Realtek |
| Power Supply | CORSAIR RM850X |
| Mouse | wired chinese gaming mouse |
| Keyboard | Microsoft ergonomic keyboard |
| Software | Windows 10 64bit |
| Benchmark Scores | + |
I get error messages when I connect this card into the socket. sometimes it work for like 10 seconds and then something like this:
irq11: no body cared try booting with the irqpoll option (check screen)
*can't reset hardware
*failed the reset the mac chip
*loads ath5k,mac80211,ath,cfg80211 modules to make it work (check photo)
I can't understand if is a hardware electrical problem or a driver issue.
I have another laptop that has even more problems as another card a usb 2.0 pcmcia card doesn't work properly there but it works good on this laptop on the photo where I want to try the wag511 and I use the same socket that usb2.0 card uses.
after that error message if I reconnect the card I get
"unknown header type 06 ignoring device."
after rebooting with irqpolll at kernel line I get a new error message still card doesn't work it says:
"unable to init eeprom"
irq11: no body cared try booting with the irqpoll option (check screen)
*can't reset hardware
*failed the reset the mac chip
*loads ath5k,mac80211,ath,cfg80211 modules to make it work (check photo)
I can't understand if is a hardware electrical problem or a driver issue.
I have another laptop that has even more problems as another card a usb 2.0 pcmcia card doesn't work properly there but it works good on this laptop on the photo where I want to try the wag511 and I use the same socket that usb2.0 card uses.
after that error message if I reconnect the card I get
"unknown header type 06 ignoring device."
after rebooting with irqpolll at kernel line I get a new error message still card doesn't work it says:
"unable to init eeprom"
Attachments
-
JAQKKka.jpg -
103_2551.JPG -
103_2550.JPG -
103_2548.JPG -
103_2549.JPG
Last edited:
