- Joined
- Jul 10, 2006
- Messages
- 446 (0.07/day)
- Location
- United Kingdom
Processor | Intel B2 conroe core 2 duo E6300 @ 3.3Ghz |
---|---|
Motherboard | Gigabyte GA965P DS4 |
Cooling | Case = 5x80mm Thermaltake silent Fans, 2xDelta 80mm Fan, CPU = Thermalright Ultra-90 + 120mm fan |
Memory | 2 x 2GB OCZ gold |
Video Card(s) | HD6850 oc - 965gpu - 1100 mem |
Storage | 80Gb Seagate 7200rpm 8Mb Cache, 80Gb Maxtor 7200rpm 8Mb Cache |
Display(s) | Samsung SM205BW 20" |
Case | Thermaltake XaserIII |
Audio Device(s) | X-Fi XtremeMusic! |
Power Supply | Hiper 580W HPU-4M580 |
Software | Windows 7 64bit ultimate |
Hey,
I finally got my new hardware for my PC! 2Gb geil 4-4-4-12 Ram, x1950pro, Gigabyte DS4 and the Intel e6300.
Im waiting to get a decent cooler because the e6300 goes to 3.5 easily with no voltage adjustments. Im pretty sure it will go a lot higher. Im waiting for a cooler because at 3.5 under load it easily hits 70'C. I didn't run it at that for long as I didn't want to screw up my hardware
Anyway thats no the point. I've installed all the hardware but I have a few problems.
they are -
When I start the PC up the screen randomly flashes black for a split second. This only happens once and im not sure why. Could it be a problem with my GC? its the HIS x1950pro turbo edition.
The other problem is that when I set my RAM at its default timings the PC will restart after around 10minutes. So im having to run the ram at 5-5-5-16
Should I RMA these 2 parts or does anyone have any ideas? I am going to format my HDD because I didn't build on a clean install. I Doubt that will have much effect though?
Anyways any help will be appreciated!
Thanks
Harry
I finally got my new hardware for my PC! 2Gb geil 4-4-4-12 Ram, x1950pro, Gigabyte DS4 and the Intel e6300.
Im waiting to get a decent cooler because the e6300 goes to 3.5 easily with no voltage adjustments. Im pretty sure it will go a lot higher. Im waiting for a cooler because at 3.5 under load it easily hits 70'C. I didn't run it at that for long as I didn't want to screw up my hardware
Anyway thats no the point. I've installed all the hardware but I have a few problems.
they are -
When I start the PC up the screen randomly flashes black for a split second. This only happens once and im not sure why. Could it be a problem with my GC? its the HIS x1950pro turbo edition.
The other problem is that when I set my RAM at its default timings the PC will restart after around 10minutes. So im having to run the ram at 5-5-5-16
Should I RMA these 2 parts or does anyone have any ideas? I am going to format my HDD because I didn't build on a clean install. I Doubt that will have much effect though?
Anyways any help will be appreciated!
Thanks
Harry