• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

New OCZ Vertex 4 Firmware Update 1.5 Beta Enhances Performance

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Nearly two months after releasing Firmware Update 1.4RC for its Vertex 4 series solid state drives (SSDs), OCZ released yet another firmware update, which pushes sequential speeds further up. The new firmware update version 1.5 beta increases maximum read speed on the 128 GB, 256 GB, and 512 GB variants of Vertex 4 to 560 MB/s (up from 550 MB/s), while maximum write speeds are increased by 6.5% on average. The 256 GB variant sees the highest write performance increase, by around 10%. The update can be applied using OCZ Toolbox.



View at TechPowerUp Main Site
 
Joined
Jan 2, 2008
Messages
3,296 (0.56/day)
System Name Thakk
Processor i7 6700k @ 4.5Ghz
Motherboard Gigabyte G1 Z170N ITX
Cooling H55 AIO
Memory 32GB DDR4 3100 c16
Video Card(s) Zotac RTX3080 Trinity
Storage Corsair Force GT 120GB SSD / Intel 250GB SSD / Samsung Pro 512 SSD / 3TB Seagate SV32
Display(s) Acer Predator X34 100hz IPS Gsync / HTC Vive
Case QBX
Audio Device(s) Realtek ALC1150 > Creative Gigaworks T40 > AKG Q701
Power Supply Corsair SF600
Mouse Logitech G900
Keyboard Ducky Shine TKL MX Blue + Vortex PBT Doubleshots
Software Windows 10 64bit
Benchmark Scores http://www.3dmark.com/fs/12108888
just went better than force gt, very nice for its price point the vertex is.
 
Joined
Oct 2, 2004
Messages
13,791 (1.94/day)
We can assume that Crucial will release a firmware for Crucial M4 around the same time OCZ will. It's often like this...
 

faramir

New Member
Joined
May 20, 2011
Messages
203 (0.04/day)
Why beta ? On OCZ forums staff stated that "1.5 beta" has bugfixes in addition to speed enhancements compared to previous version. Why call it "beta" then if it's supposedly better than the odler version ? Why treat your customers as lab rats ?
 
Joined
Oct 2, 2004
Messages
13,791 (1.94/day)
BETA just means it has gone through basic testing but is still not yet ready for mass public release.
Prototypes, Pre-releases and Alphas are stuff that is not tested much and most should stay away from them.
 

imitation

New Member
Joined
Jun 4, 2011
Messages
131 (0.03/day)
Processor Intel i3-2120
Motherboard ASUS P8H77-V LE
Cooling CPU: AQ Cuplex Kryos Delrin /// GPU: Custom water /// Inno HPPS+ /// 2x 240 Rad /// Noiseblocker PWM
Memory 8G Corsair Vengeance DDR3-1600
Video Card(s) XFX HD5870 @ 1G/1.25G
Storage Samsung 830 128G + some HDDs
Display(s) LG W2242T + Benq W700+
Case Cooler Master CM690 II Advanced USB3
Power Supply beQuiet Pure Power L7 430W
Software W7U64
Have they fixed the 'feature' where write performance drops below 80MB/s when more than 50% of the SSD's space is used?
 
Joined
Mar 9, 2012
Messages
213 (0.05/day)
System Name "Da Krawnik Six Hunnit"
Processor Intel i5 2500K @ 4.6GHz
Motherboard ASUS P8P67 EVO (B3)
Cooling H100i w/2x Bitfenix Spectre Pros + Bitfenix Spectre Pro Blue LED 1x 200mm + 1x 120mm
Memory Patriot Intel Extreme Masters Limited Edition 8GB (2x4GB) 1600MHz
Video Card(s) MSI GTX 970 @ 1491MHz (Actual Boost) / 7.6GHz
Storage Samsung 840 EVO 250GB + 2x WD Green 2TB + 1x WD Green 1TB
Display(s) BenQ XL2430T 144Hz
Case Corsair 600T w/full custom 1/2" acrylic side panel
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro
Power Supply Coolermaster Silent Pro 850w
Mouse Roccat Kone XTD (laser)
Keyboard Corsair K65 RGB
Software Windows 10 Pro 64-bit
Benchmark Scores Couldn't care less about benchmark scores.
Why beta ? On OCZ forums staff stated that "1.5 beta" has bugfixes in addition to speed enhancements compared to previous version. Why call it "beta" then if it's supposedly better than the odler version ? Why treat your customers as lab rats ?

Because it's not final. And no one said you have to use it, because unlike lab rats, you have a choice. ;)
 

fullinfusion

Vanguard Beta Tester
Joined
Jan 11, 2008
Messages
9,909 (1.67/day)
Thank you OCZ! 1.5 is working nicely and keepem updates coming! :respect:
 
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
Beta can also mean that if it fucks the drive, they're not liable. I just don't like how the vertex 4's seem to have a new firmware every 2 months.
 

Abbysion

New Member
Joined
Jul 6, 2012
Messages
2 (0.00/day)
Originally Posted by imitation
Have they fixed the 'feature' where write performance drops below 80MB/s when more than 50% of the SSD's space is used?

Is this an issue on the 256GB model too? I read somewhere (don't remeber exactly where) that this issue was only present on the lower capacities. The 256GB SKU does not suffer such a severe performance degradation. Am I correct?
 
Joined
Aug 14, 2010
Messages
102 (0.02/day)
Is this an issue on the 256GB model too? I read somewhere (don't remeber exactly where) that this issue was only present on the lower capacities. The 256GB SKU does not suffer such a severe performance degradation. Am I correct?

I don't have that issue on my 90GB Agility 2 and i am using 50GB right now. The benchmarks show that it is not as fast as when i bought it but using it i couldn't tell the difference.
 

Abbysion

New Member
Joined
Jul 6, 2012
Messages
2 (0.00/day)
I don't have that issue on my 90GB Agility 2 and i am using 50GB right now. The benchmarks show that it is not as fast as when i bought it but using it i couldn't tell the difference.

The performance drop is present on the Vertex 4 128GB, not sure if other capacities are affected (I read not). The Agility 2 is Sandforce based, this issue is unrelated to those controllers as far as I know.
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
Have they fixed the 'feature' where write performance drops below 80MB/s when more than 50% of the SSD's space is used?
Too bad HDD manufacturers haven't fixed that on their products, either, and they've been out there for several decades.
 

imitation

New Member
Joined
Jun 4, 2011
Messages
131 (0.03/day)
Processor Intel i3-2120
Motherboard ASUS P8H77-V LE
Cooling CPU: AQ Cuplex Kryos Delrin /// GPU: Custom water /// Inno HPPS+ /// 2x 240 Rad /// Noiseblocker PWM
Memory 8G Corsair Vengeance DDR3-1600
Video Card(s) XFX HD5870 @ 1G/1.25G
Storage Samsung 830 128G + some HDDs
Display(s) LG W2242T + Benq W700+
Case Cooler Master CM690 II Advanced USB3
Power Supply beQuiet Pure Power L7 430W
Software W7U64
The performance drop is present on the Vertex 4 128GB, not sure if other capacities are affected (I read not). The Agility 2 is Sandforce based, this issue is unrelated to those controllers as far as I know.

This is specifically related to the Vertex 4's 1.4 firmware and therefore is not an issue on earlier drives. While the VTX4 was performing at 170MB/s over the whole drive before (f/w <1.4), it now reaches much higher numbers, but only when less than half-full.

Is this an issue on the 256GB model too? I read somewhere (don't remeber exactly where) that this issue was only present on the lower capacities. The 256GB SKU does not suffer such a severe performance degradation. Am I correct?

I tried to find reviews testing the 256GB model for this, but couldn't find any. Maybe there is someone on TPU that could test the new firmware with HDtune.

Too bad HDD manufacturers haven't fixed that on their products, either, and they've been out there for several decades.
:wtf:
 
Joined
Sep 15, 2011
Messages
6,457 (1.41/day)
Processor Intel® Core™ i7-13700K
Motherboard Gigabyte Z790 Aorus Elite AX
Cooling Noctua NH-D15
Memory 32GB(2x16) DDR5@6600MHz G-Skill Trident Z5
Video Card(s) ZOTAC GAMING GeForce RTX 3080 AMP Holo
Storage 2TB SK Platinum P41 SSD + 4TB SanDisk Ultra SSD + 500GB Samsung 840 EVO SSD
Display(s) Acer Predator X34 3440x1440@100Hz G-Sync
Case NZXT PHANTOM410-BK
Audio Device(s) Creative X-Fi Titanium PCIe
Power Supply Corsair 850W
Mouse Logitech Hero G502 SE
Software Windows 11 Pro - 64bit
Benchmark Scores 30FPS in NFS:Rivals
Just one question for SSD guys in here. That means for every firmware update you need to do a full system restore??!??
 

imitation

New Member
Joined
Jun 4, 2011
Messages
131 (0.03/day)
Processor Intel i3-2120
Motherboard ASUS P8H77-V LE
Cooling CPU: AQ Cuplex Kryos Delrin /// GPU: Custom water /// Inno HPPS+ /// 2x 240 Rad /// Noiseblocker PWM
Memory 8G Corsair Vengeance DDR3-1600
Video Card(s) XFX HD5870 @ 1G/1.25G
Storage Samsung 830 128G + some HDDs
Display(s) LG W2242T + Benq W700+
Case Cooler Master CM690 II Advanced USB3
Power Supply beQuiet Pure Power L7 430W
Software W7U64
Was this a Marvell Controller issue or just Vertex 4 (since Vertex 4 is using a modified Marvell controller)?

This is very specific to the Vertex's 1.4 firmware and does not affect any other SSDs using Marvel's controllers.
Tom's did a nice re-review on this: OCZ Vertex 4 128 GB: Testing Write Performance With Firmware 1.4

Just one question for SSD guys in here. That means for every firmware update you need to do a full system restore??!??

That depends. Most updates will try to preserve your data, but it is always a good idea to have a backup at hand in case something goes wrong.
 
Last edited:
Top