Nahnken
New Member
- Joined
- Jul 19, 2008
- Messages
- 2 (0.00/day)
- Location
- SoCal
| Processor | AMD 9850 BE @ 2.83 |
|---|---|
| Motherboard | ASUS M3A32-MVP Delux |
| Cooling | Air |
| Memory | 4x 2048 Corsair Dominator 1066 @ 840 |
| Video Card(s) | ASUS ATI Radeon HD3870x2 |
| Storage | 2x Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM SATA 3.0Gb/s |
| Display(s) | SAMSUNG T220 Rose-Black 22" 2ms GTG Widescreen LCD Monitor |
| Case | Thermaltake Armor+ VH6000BWS Black Aluminum / Steel ATX Full Tower Computer Case |
| Power Supply | Thermaltake 850w Toughpower psu |
| Software | Vista Ultimate |
So I finally decided to upgrade from my system that I built about 2-3 years ago. My new rig is listed in my Sig and I've done some basic tweeking in the BIOS for some simple Overclocking.
I've run some benchmark test with PC Mark06 and can never get this thing to hit over P9000. I'm going to attach both CPU-Z and GPU-Z screenshots for a bit more information, but any help that could be offered would be great. I know this rig is capable of much more then it's putting out, I just can't seem to get it to be stable past where it is now. During benchmarks, CPU temps have always been bellow 50c and GPU bellow 55c. I was considering going to a liquid cooled system, but I've got 3 more Thermaltake 120mm fans comming that will fit into the optional slots in the Armor+ case.
At one time I was able to get the Memory stable at 1066, but I can't seem to get back to that atm so I'm back to just running it at 800. Also I had the CPU at 3.10 stable but have backed it down until I do some more research. Thanks for your time reading this and for any advice that you can suggest. Just saw on the CPU the voltage didn't show up. It's currentlly set at 1.280v which is default.
I've run some benchmark test with PC Mark06 and can never get this thing to hit over P9000. I'm going to attach both CPU-Z and GPU-Z screenshots for a bit more information, but any help that could be offered would be great. I know this rig is capable of much more then it's putting out, I just can't seem to get it to be stable past where it is now. During benchmarks, CPU temps have always been bellow 50c and GPU bellow 55c. I was considering going to a liquid cooled system, but I've got 3 more Thermaltake 120mm fans comming that will fit into the optional slots in the Armor+ case.
At one time I was able to get the Memory stable at 1066, but I can't seem to get back to that atm so I'm back to just running it at 800. Also I had the CPU at 3.10 stable but have backed it down until I do some more research. Thanks for your time reading this and for any advice that you can suggest. Just saw on the CPU the voltage didn't show up. It's currentlly set at 1.280v which is default.
