• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

No Signal

S

SNIPERMAC

New Member
Joined
Aug 19, 2007
Messages
1 (0.00/day)
can anyone help.
the board is an MSI N1996. running a pentium 4, when i boot up the monitor won't come on. I have tried differant monitors and graphics card and am now at a loss. could this be the board as the onboard graphics is the same? any help if sorting this would be great. many thanks in advance. Mac:confused:
 
N

Namslas90

New Member
Joined
Aug 27, 2006
Messages
4,846 (0.75/day)
Location
Earth
Make sure onboard graphics are NOT disabled. Check monitor, monitor connections. If it still don't work then it's probably bad mobo.

:toast:
 
M

mullered07

Joined
Jan 28, 2007
Messages
2,648 (0.42/day)
Location
UK
System Specs
System Name Ma Biatch
Processor i7 860
Motherboard Gigabyte GA-P55-UD3A
Cooling Noctua
Memory 8gb (4x2gb) G-Skill
Video Card(s) GTX 470
Storage WD5000aaks raid0
Display(s) Sony Bravia 37" 1080p
Case CM 690
Audio Device(s) Onboard
Power Supply Corsair HX520
Software Windows 7 Ultimate
why not disabled if hes running a agp/pcie card he wants onboard disabled?

is it a new build or has this problem just started happening, what graphics card have you got
 
N

Namslas90

New Member
Joined
Aug 27, 2006
Messages
4,846 (0.75/day)
Location
Earth
mullered07 said:
why not disabled if hes running a agp/pcie card he wants onboard disabled?
Click to expand...

It's an older board designed for OEM's(HP,Compaq,DELL), it if is disabled and its not working then enable it. If it's enabled and not working disable it. That mobo cannot support all GPU's. Mostly the onboard needs to be enabled in order for it to work with add on GPU.

Also reseting the CMOS might do the trick.

:toast:
 
You must log in or register to reply here.
Top