• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Nvidia 8800GTS Overclocking

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
Hi Guys, Looking fo a little advice re the above.

My 8800GTS is now watercooled and on stock values is running at about 40'c under full load, so there now seems to be a bit of room for a nice OC.

So far I have been using the Nvidia software (Nvidia Control Panel) to adjust the core and memory speeds. However it seems to reset itself everytime I turn the machine off.

What other software, if any, do poeple use to overclock these cards and what would be a realistic speed to aim for?

Thanks In Advance
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
Try Rivatuner.

You can't get the OC to survive a boot by clocking via softaware. To get the OC stick you'd need to edit/flash the VGA bios.

btw, how do you cool the voltage regulators and the daughter core on the card? Fullcover block or sinks?
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
I am using the EK Full Cover Block, the nForce chip temperature runs about 4-8'c higher than the core.

Thanks I will have a look at Rivatuner, flashing the VGA Bios - as simpe as a mobo bios or more complex?
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
just as simple adjust the settings with nibitor and from there you just flash and go with NVflash i think is what its called

try googling flashing 8800GTS :D that should yield some results
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
Flashing a VGA bios is just as easy as with mobos. :)
Look here for details.
 

rick22

New Member
Joined
Sep 4, 2006
Messages
628 (0.10/day)
System Name bubba
Processor e something
Motherboard old but good mobo
Cooling my farts
Memory can't find it
Video Card(s) EVGA 250 took a shit..back to my 4850..fk off ati fanboys
Storage i think i have one
Display(s) not sure but it sucks
Case lol my mouth
Audio Device(s) me
Power Supply ass farts
Software that sucks to
Benchmark Scores i'm so fat i sat on the bench and smashed assssit
Rivatuner is the best way to go..also you should put your fan on 100%..you can do that too in Rivatuner. then set it for windows start up..the fans will come on 100%...
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
Rivatuner is the best way to go..also you should put your fan on 100%..you can do that too in Rivatuner. then set it for windows start up..the fans will come on 100%...

thats noisy
this is a better way
set the 2d fans to 25-50% the low power 3d fans to 45-75% and the high power 3d fans to 70-100%
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
rick22 and cdawall,
He's on water...
 

HookeyStreet

Eat, sleep, game!
Joined
Aug 29, 2004
Messages
7,122 (0.99/day)
Location
Great Yarmouth, England
Hi Guys, Looking fo a little advice re the above.

My 8800GTS is now watercooled and on stock values is running at about 40'c under full load, so there now seems to be a bit of room for a nice OC.

So far I have been using the Nvidia software (Nvidia Control Panel) to adjust the core and memory speeds. However it seems to reset itself everytime I turn the machine off.

What other software, if any, do poeple use to overclock these cards and what would be a realistic speed to aim for?

Thanks In Advance

Start by getting your card running the way it was meant to......I have the BIOS flash for it if you want it? ;)

EDIT: actually, you have the OC2 edition, what are the stock speeds?

PS: why havent you tried ATiTool yet?
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
@ HooketStreet - Yeah if you have the bios flash that would be much appriciated. As for the speeds, at stock they are 580/850

@ Largon - Thanks for the link, Unfortunatly I don t have a floppy disk drive - I assume from that huide this is going to cause problems?
 
Joined
Jun 12, 2007
Messages
344 (0.06/day)
Location
Georgetown, Ontario, Canada
System Name Dirty Bitch
Processor Intel Core i5 2500K Quad Core LGA1155 @ 4.6GHZ Sandy Bridge 6MB
Motherboard ASRock Fatal1ty Z77 Professional-M "Micro-ATX"
Cooling Raystorm & Evga Full Blocks, Single & Dual 120mm Radiator With Push/Pull Config, All Noctua fans
Memory 12GB G.SKILL Ripjaws DDR3 @1600 CL9-9-9-24
Video Card(s) 2X SLI EVGA GTX 480
Storage PNY XLR8 PRO SSD 256GB - 1TB WD Black @7200RPM
Display(s) LG 40" LED 1080p & ASUS VE278Q LCD Black 27"
Case Lian Li PC-V354B Aluminum Mini Computer Case mATX
Audio Device(s) Integrated out to Marantz Receiver 4.0 Klipsch Speaker Setup
Power Supply OCZ ModXStream Pro 700W ATX
Software Windows 7 Ultimate, G15 Keyboard, Cyborg R.A.T 7 Mouse, IceMat Mouse Pad
You can just OC with RivaTuner it has the option to enable the OC after a restart.
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
OK so I have downloaded RivaTuner and installed. Went into System Tweeks under Driver Settings/Customize and adjusted the core speed from 580 to 600, checked the box to apply settings at windows startup. tested the speed, applied and restarted.

But the core speed is still 580? I assume I am missed something obvious here, but have never o/c'd a graphics card before, nor used rivatuner.

Please point me in the right direction.
 
Joined
Jun 12, 2007
Messages
344 (0.06/day)
Location
Georgetown, Ontario, Canada
System Name Dirty Bitch
Processor Intel Core i5 2500K Quad Core LGA1155 @ 4.6GHZ Sandy Bridge 6MB
Motherboard ASRock Fatal1ty Z77 Professional-M "Micro-ATX"
Cooling Raystorm & Evga Full Blocks, Single & Dual 120mm Radiator With Push/Pull Config, All Noctua fans
Memory 12GB G.SKILL Ripjaws DDR3 @1600 CL9-9-9-24
Video Card(s) 2X SLI EVGA GTX 480
Storage PNY XLR8 PRO SSD 256GB - 1TB WD Black @7200RPM
Display(s) LG 40" LED 1080p & ASUS VE278Q LCD Black 27"
Case Lian Li PC-V354B Aluminum Mini Computer Case mATX
Audio Device(s) Integrated out to Marantz Receiver 4.0 Klipsch Speaker Setup
Power Supply OCZ ModXStream Pro 700W ATX
Software Windows 7 Ultimate, G15 Keyboard, Cyborg R.A.T 7 Mouse, IceMat Mouse Pad
it should look something like this...



Make sure startup settings says it's gonna start up at the clocks you want. You have to press save then apply.
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
Thats exactly what I have done, and the screen is the same as your screenshot? I am using v2.02 of RivaTuner if that makes any difference.
 
Joined
Jun 12, 2007
Messages
344 (0.06/day)
Location
Georgetown, Ontario, Canada
System Name Dirty Bitch
Processor Intel Core i5 2500K Quad Core LGA1155 @ 4.6GHZ Sandy Bridge 6MB
Motherboard ASRock Fatal1ty Z77 Professional-M "Micro-ATX"
Cooling Raystorm & Evga Full Blocks, Single & Dual 120mm Radiator With Push/Pull Config, All Noctua fans
Memory 12GB G.SKILL Ripjaws DDR3 @1600 CL9-9-9-24
Video Card(s) 2X SLI EVGA GTX 480
Storage PNY XLR8 PRO SSD 256GB - 1TB WD Black @7200RPM
Display(s) LG 40" LED 1080p & ASUS VE278Q LCD Black 27"
Case Lian Li PC-V354B Aluminum Mini Computer Case mATX
Audio Device(s) Integrated out to Marantz Receiver 4.0 Klipsch Speaker Setup
Power Supply OCZ ModXStream Pro 700W ATX
Software Windows 7 Ultimate, G15 Keyboard, Cyborg R.A.T 7 Mouse, IceMat Mouse Pad
Well not sure what the problem is then? Im using v2.01 I know I had a problem with vista and I had to disable UAC but your using xp pro right?

I would give it another try set your clocks press save under the "apply at startup" setting then press apply then ok then ok again and the program should close. If it asks you to restart in the program don't just restart the normal way.
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
Well I have tried several times now, even uninstalled and reinstalled both Nvidia drivers and RivaTuner but no luck.

What about powerstrip, I have used that in the past?
 
Joined
Jun 12, 2007
Messages
344 (0.06/day)
Location
Georgetown, Ontario, Canada
System Name Dirty Bitch
Processor Intel Core i5 2500K Quad Core LGA1155 @ 4.6GHZ Sandy Bridge 6MB
Motherboard ASRock Fatal1ty Z77 Professional-M "Micro-ATX"
Cooling Raystorm & Evga Full Blocks, Single & Dual 120mm Radiator With Push/Pull Config, All Noctua fans
Memory 12GB G.SKILL Ripjaws DDR3 @1600 CL9-9-9-24
Video Card(s) 2X SLI EVGA GTX 480
Storage PNY XLR8 PRO SSD 256GB - 1TB WD Black @7200RPM
Display(s) LG 40" LED 1080p & ASUS VE278Q LCD Black 27"
Case Lian Li PC-V354B Aluminum Mini Computer Case mATX
Audio Device(s) Integrated out to Marantz Receiver 4.0 Klipsch Speaker Setup
Power Supply OCZ ModXStream Pro 700W ATX
Software Windows 7 Ultimate, G15 Keyboard, Cyborg R.A.T 7 Mouse, IceMat Mouse Pad
Give ati tool a try then.
 
Joined
Jun 4, 2007
Messages
1,050 (0.17/day)
Location
indiana
Processor c2d e8400@ 3.8ghz 24/7
Motherboard Abit IP-35e 80$ lol
Cooling zalman cnps9700 led
Memory 2 x 2 gig patriot viper
Video Card(s) evga Gtx 285 oc
Storage 2 x 300gig sata seagate 7200.10 in raid 0/ 1.5TB for backup
Display(s) acer 24" TFT LCD AL2416WBSD
Case Antec 902
Audio Device(s) XtremeGamer Fatal1ty Pro series
Power Supply ocz gamextreme 700w
Software windows 7 ultimate
Are you saving your overclock to a custom profile? I dont think it will apply it at startup if not :toast:
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
Are you saving your overclock to a custom profile? I dont think it will apply it at startup if not :toast:


I have tried both, no luck - ATITool will be my next try. Why is nothing ever simple ay?
 

BigJunit

New Member
Joined
Feb 27, 2007
Messages
117 (0.02/day)
Location
UK - Avon
Processor AMD Athlon 64 X2 5200+ @ 3.2Ghz
Motherboard Asus CROSSHAIR nForce 590 SLi
Cooling Custom Watercooled 1/2' Loop (CPU & GPU)
Memory OCZ 2GB PC2-6400C4 Platinum Revision 2 XTC Series DDR2
Video Card(s) Nvida BFG Geforce 8800GTS OC2 320mb
Storage 320gb Seagate SataII & 400gb Freecom External
Display(s) HP 22' Widescreen DVI 1650x1050
Case Asus Custom
Audio Device(s) Asus (5.1 came with board)
Power Supply Jeantech 600w Modular
Software Windows XP Pro
well ATITool worked a treat, now running 600/1000 with a 2-4'c increase in temps. Havent pushed any further just yet but already seeing a 20-30FPS increase on BF2142.

How far do you think I should go with the core speed?

Thanks for the help guys.
 
Joined
Jun 12, 2007
Messages
344 (0.06/day)
Location
Georgetown, Ontario, Canada
System Name Dirty Bitch
Processor Intel Core i5 2500K Quad Core LGA1155 @ 4.6GHZ Sandy Bridge 6MB
Motherboard ASRock Fatal1ty Z77 Professional-M "Micro-ATX"
Cooling Raystorm & Evga Full Blocks, Single & Dual 120mm Radiator With Push/Pull Config, All Noctua fans
Memory 12GB G.SKILL Ripjaws DDR3 @1600 CL9-9-9-24
Video Card(s) 2X SLI EVGA GTX 480
Storage PNY XLR8 PRO SSD 256GB - 1TB WD Black @7200RPM
Display(s) LG 40" LED 1080p & ASUS VE278Q LCD Black 27"
Case Lian Li PC-V354B Aluminum Mini Computer Case mATX
Audio Device(s) Integrated out to Marantz Receiver 4.0 Klipsch Speaker Setup
Power Supply OCZ ModXStream Pro 700W ATX
Software Windows 7 Ultimate, G15 Keyboard, Cyborg R.A.T 7 Mouse, IceMat Mouse Pad
I can get up to 675 on air so try around 675-700
 
Joined
Jul 9, 2006
Messages
3,288 (0.51/day)
Location
Halifax, Canada
Processor Q6600 G0 @ 3.2Ghz
Motherboard Asus p5k-Premium/Black Pearl
Cooling Luna Block, 240mm rad
Memory Patriot Extreme PC2-6400 2x2GB
Video Card(s) Saphire 5850 1GB
Storage 60GB SSD + 2x500GB/1TB/2TB
Display(s) Samsung 226BW and 50" Panasonic S2
Case Silverstone TJ-09
Audio Device(s) X-fi Prelude
Power Supply Enermax Galaxy Dxx 850watt
Software Windows7 32Bit
Benchmark Scores Super Pi 1M 14.333
dont just jump to high clocks get there slowly, every card is different and yours may not clcok as good as mello newf's. use the ati tool overclocking guide.

atm Im not even going to oc my card.. well I'll have to see how it fairs in a 2vrs2 COH game with everything maxed!

Nice clock newf, someday I may just put my system on water.. I was just looking at it and it will cost me like $600 shipped lol... my cpu wont clock very high stable with stock volts..

Edit: move up like 10mhz each test run and test for like 5 mins doing the core 1st.. when you hit a wall/see artifacts down clock some till no artifacts.. that will give you your max core clock with whatever volts your using. than run stock core and work on the mem, play safe take your time.
 
Joined
Jul 9, 2006
Messages
3,288 (0.51/day)
Location
Halifax, Canada
Processor Q6600 G0 @ 3.2Ghz
Motherboard Asus p5k-Premium/Black Pearl
Cooling Luna Block, 240mm rad
Memory Patriot Extreme PC2-6400 2x2GB
Video Card(s) Saphire 5850 1GB
Storage 60GB SSD + 2x500GB/1TB/2TB
Display(s) Samsung 226BW and 50" Panasonic S2
Case Silverstone TJ-09
Audio Device(s) X-fi Prelude
Power Supply Enermax Galaxy Dxx 850watt
Software Windows7 32Bit
Benchmark Scores Super Pi 1M 14.333
you can flash an ati card with a usb stick with some flash tool you load onto the usb stick and the original bios... and modded bios. I had to do this to fix a bad clock flash I had done on my card... but I forget what the flah tool was called? atiflash! not atiwinflash.
 

HookeyStreet

Eat, sleep, game!
Joined
Aug 29, 2004
Messages
7,122 (0.99/day)
Location
Great Yarmouth, England
@ HooketStreet - Yeah if you have the bios flash that would be much appriciated. As for the speeds, at stock they are 580/850

@ Largon - Thanks for the link, Unfortunatly I don t have a floppy disk drive - I assume from that huide this is going to cause problems?

lo m8

Sorry, Ive only just seen your post, do you want the high performance BIOS that I have for your card?

Give me your email addy and I will winrar it up and send it to you ;)

(Ive just pm'ed you m8)
 
Top