• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

OCCT Unstable

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
I can't seem to figure it out. I ran 3.9Ghz for months. Now I can't seem to clear 45min without a BSOD. On top of that I have to repair windows from the disk after that too. I mean its a NASTY BSOD.

I tried a clean install of windows and got the same result. My question is could there have been a windows update that now causes my system to have an unstable OC or could something be wearing out?

Hell they even updated OCCT maybe thats it? I'm starting to think an hour in Prime95 might be better.

What do you guys think?
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I'd try pulling out 2 sticks of RAM, it might be a RAM stick going bad.
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
memtest86 but I would only test 2GB at a time with it.
 
Joined
Feb 19, 2006
Messages
6,270 (0.95/day)
Location
New York
Processor INTEL CORE I9-9900K @ 5Ghz all core 4.7Ghz Cache @1.305 volts
Motherboard ASUS PRIME Z390-P ATX
Cooling CORSAIR HYDRO H150I PRO RGB 360MM 6x120mm fans push pull
Memory CRUCIAL BALLISTIX 3000Mhz 4x8 32gb @ 4000Mhz
Video Card(s) EVGA GEFORECE RTX 2080 SUPER XC HYBRID GAMING
Storage ADATA XPG SX8200 Pro 1TB 3D NAND NVMe,Intel 660p 1TB m.2 ,1TB WD Blue 3D NAND,500GB WD Blue 3D NAND,
Display(s) 50" Sharp Roku TV 8ms responce time and Philips 75Hz 328E9QJAB 32" curved
Case BLACK LIAN LI O11 DYNAMIC XL FULL-TOWER GAMING CASE,
Power Supply 1600 Watt
Software Windows 10
I am leaning towards the ram too.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
memtest86 but I would only test 2GB at a time with it.

while thats a suitable method to test the ram itself, it wont help if his issue is caused by having all the sticks in at once - the extra stress on the NB, etc etc.


i've had issues like this over time as well, most common cause for me was PSU voltages dropping slightly - had to boost just about every voltage i had by one notch and it went good again.
 
Joined
Nov 21, 2007
Messages
3,688 (0.62/day)
Location
Ohio
System Name Felix777
Processor Core i5-3570k@stock
Motherboard Biostar H61
Memory 8gb
Video Card(s) XFX RX 470
Storage WD 500GB BLK
Display(s) Acer p236h bd
Case Haf 912
Audio Device(s) onboard
Power Supply Rosewill CAPSTONE 450watt
Software Win 10 x64
i had this happen when i had a 680i LT. q6600 @ 3ghz and 4gb of ram(2x2gb). I ended up having, as mussels did. boosting my NB voltage and CPU voltage a notch or 2 and she was good again.
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
So it could be the PSU or the RAM.

Well I just ran the windows mem test and it came back clean......I think lol. No windows popped up after restart.

Anyway the PSU is only about a year and a half old but the RAM is much older. Ill run memtest86 and post back with results.



Edit: Never-mind. I just read this.....Memtest86 3.5 Release - Less than 4GB only (3/Jan/09)


I'm now afraid to run OCCT at stock. If its unstable at stock I am proper screwed.
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
Anymore ideas?
 
Joined
Nov 21, 2007
Messages
3,688 (0.62/day)
Location
Ohio
System Name Felix777
Processor Core i5-3570k@stock
Motherboard Biostar H61
Memory 8gb
Video Card(s) XFX RX 470
Storage WD 500GB BLK
Display(s) Acer p236h bd
Case Haf 912
Audio Device(s) onboard
Power Supply Rosewill CAPSTONE 450watt
Software Win 10 x64
How old's your mobo? isn't it possible for the NB to be wearing a little? hence the need for more voltage. What are your NB temps anyway? yea i'm hung on the NB :p
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
How old's your mobo? isn't it possible for the NB to be wearing a little? hence the need for more voltage. What are your NB temps anyway? yea i'm hung on the NB :p

NB volts are at stock. The only volts I up is the CPU which is already at 1.47.
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.08/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
Bump the NB voltage up 2 clicks and see what that does . And another thing stop running OCCT that is going to kill your shit faster than ANY thing ! Run it once to check for stability and be done . If you have this problem ONLY when you run OCCT then just don't run it . It is a stress test it takes your hardware to the MAX and holds it there ! You would not go out to your car and red line it for 3 hours now would you ? this is the same thing ! Red line that baby till it can't take any more ? No just bump the NB voltage up some and see if that helps but I still caution against the OCCT thing .
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
Bump the NB voltage up 2 clicks and see what that does . And another thing stop running OCCT that is going to kill your shit faster than ANY thing ! Run it once to check for stability and be done . If you have this problem ONLY when you run OCCT then just don't run it . It is a stress test it takes your hardware to the MAX and holds it there ! You would not go out to your car and red line it for 3 hours now would you ? this is the same thing ! Red line that baby till it can't take any more ? No just bump the NB voltage up some and see if that helps but I still caution against the OCCT thing .

Now you got me worried about my CPU. Do you think I may have done some kind of permanent damage? I've always kept her cool.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Bump the NB voltage up 2 clicks and see what that does . And another thing stop running OCCT that is going to kill your shit faster than ANY thing ! Run it once to check for stability and be done . If you have this problem ONLY when you run OCCT then just don't run it . It is a stress test it takes your hardware to the MAX and holds it there ! You would not go out to your car and red line it for 3 hours now would you ? this is the same thing ! Red line that baby till it can't take any more ? No just bump the NB voltage up some and see if that helps but I still caution against the OCCT thing .

the analogy of revving your car to the max doesnt apply here - its more appropriate to say you're putting it in its highest gear.

you dont drive you car in first all the damn time, so you DO need to crank it up and test it whenever you screw around with the engine - in EVERY gear possible.
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.08/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
the analogy of revving your car to the max doesnt apply here - its more appropriate to say you're putting it in its highest gear.

you dont drive you car in first all the damn time, so you DO need to crank it up and test it whenever you screw around with the engine - in EVERY gear possible.

Yeah you are right .

You may have damages the CPU . People are hell bent on stressing there hardware to the max thinking that some how this is good to do . It is not . I tell you what set you OC and every thing to NORMAL run your computer for a few days like that then try you OC once again this time take your voltages up some RAM , NB , and CPU . Then test it out but again you are revving that gear up to the MAX so I would say not to run it for longer than 1 hour JMHO .
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
I blame the power circuitry of the M4A78-E.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Yeah you are right .

You may have damages the CPU . People are hell bent on stressing there hardware to the max thinking that some how this is good to do . It is not . I tell you what set you OC and every thing to NORMAL run your computer for a few days like that then try you OC once again this time take your voltages up some RAM , NB , and CPU . Then test it out but again you are revving that gear up to the MAX so I would say not to run it for longer than 1 hour JMHO .

its a fair opinion, but the mentality is where i differ.


The way you see it, is that your system is fragile, yet important. dont stress it cause you cant go without it, so baby it, nurse it, and look after it.


the way i see it, is my system either works at 100% for as long as i damn well want it to, in the worst imaginable conditions (45C ambients, our summer)... or its faulty hardware/not set up right.

if my system cant handle every god damned abuse software can give it at stock settings (stress testing/OCCT linpack/furmark etc) - then its faulty hardware, and needs to be replaced. why suffer with bad hardware? if it cant handle stress testing, then its not good enough.


(if i repeated myself a few times... its 4am and sobriety is not on my todo list tonight... uhh, this morning)
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.08/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
its a fair opinion, but the mentality is where i differ.


The way you see it, is that your system is fragile, yet important. dont stress it cause you cant go without it, so baby it, nurse it, and look after it.


the way i see it, is my system either works at 100% for as long as i damn well want it to, in the worst imaginable conditions (45C ambients, our summer)... or its faulty hardware/not set up right.

if my system cant handle every god damned abuse software can give it at stock settings (stress testing/OCCT linpack/furmark etc) - then its faulty hardware, and needs to be replaced. why suffer with bad hardware? if it cant handle stress testing, then its not good enough.


(if i repeated myself a few times... its 4am and sobriety is not on my todo list tonight... uhh, this morning)
Yeah I agree with you up to a point . I still think that OCCT linpack and all that is nothing more than a tool much like a wrench , If you tighten the nut up too much it will break .
 
Joined
Jul 11, 2010
Messages
140 (0.03/day)
Location
Finland
Processor i7-2500K @ 4.5 GHz
Motherboard Gigabyte GA-Z68XP-UD4
Cooling EK Supreme HF
Memory Kingston HyperX Genesis 2 * 4 GB
Video Card(s) Radeon HD 7950
Storage OCZ Agility 3
Case Bitfenix Shinobi XL
Power Supply Super Flower SF-700P14XE
Running OCCT Linpack or PSU test for hours on high overclock systems may not be so smart but I wouldn't want to use a system that can't easily handle 24 h of normal OCCT or Prime95 stress testing.
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.08/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
Running OCCT Linpack or PSU test for hours on high overclock systems may not be so smart but I wouldn't want to use a system that can't easily handle 24 h of normal OCCT or Prime95 stress testing.

WOW that is a bit over extreme ! I mean 8 hours is fine but my GOD man 24 hours ?
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
WOW that is a bit over extreme ! I mean 8 hours is fine but my GOD man 24 hours ?

Running OCCT Linpack or PSU test for hours on high overclock systems may not be so smart but I wouldn't want to use a system that can't easily handle 24 h of normal OCCT or Prime95 stress testing.

what is the difference between stress test and WCG(crunching) keeping the CPU at 100% 24/7?
If running the parts stressed 24/7 really killed hardware as fast as your making it sound then i would have had 14 dead rigs including my i7 rig. I have ran EVERY rig i have had in the last 4 years overclocked and crunching 24/7 100% after testing it for 6hrs linx and 2hrs OCCT and have yet had anything die other then a cheap PSU from a OEM machine.
Keep in mind i always have made sure everything stays cool that is stressed also(CPU,NB,SB,mosfet,chokes)
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
WOW that is a bit over extreme ! I mean 8 hours is fine but my GOD man 24 hours ?

8 hours is all i go for, but i'm not a folder or cruncher

what is the difference between stress test and WCG(crunching) keeping the CPU at 100% 24/7?
If running the parts stressed 24/7 really killed hardware as fast as your making it sound then i would have had 14 dead rigs including my i7 rig. I have ran EVERY rig i have had in the last 4 years overclocked and crunching 24/7 100% after testing it for 6hrs linx and 2hrs OCCT and have yet had anything die other then a cheap PSU from a OEM machine.
Keep in mind i always have made sure everything stays cool that is stressed also(CPU,NB,SB,mosfet,chokes)

if its not 100% stable, its not stable at all, period. I'm with ya on that.
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
Ben,

I would try running one stick at a time in memtest to make sure it's not the RAM, run them at stock. If they are bad, it'll show. once you confirmed is not your memory then you can move on to tweaking your settings. Also remember, components degrade. When that happens they'll require a bit more voltage from time to time.
 

TheMailMan78

Big Member
Joined
Jun 3, 2007
Messages
22,599 (3.68/day)
Location
'Merica. The Great SOUTH!
System Name TheMailbox 5.0 / The Mailbox 4.5
Processor RYZEN 1700X / Intel i7 2600k @ 4.2GHz
Motherboard Fatal1ty X370 Gaming K4 / Gigabyte Z77X-UP5 TH Intel LGA 1155
Cooling MasterLiquid PRO 280 / Scythe Katana 4
Memory ADATA RGB 16GB DDR4 2666 16-16-16-39 / G.SKILL Sniper Series 16GB DDR3 1866: 9-9-9-24
Video Card(s) MSI 1080 "Duke" with 8Gb of RAM. Boost Clock 1847 MHz / ASUS 780ti
Storage 256Gb M4 SSD / 128Gb Agelity 4 SSD , 500Gb WD (7200)
Display(s) LG 29" Class 21:9 UltraWide® IPS LED Monitor 2560 x 1080 / Dell 27"
Case Cooler Master MASTERBOX 5t / Cooler Master 922 HAF
Audio Device(s) Realtek ALC1220 Audio Codec / SupremeFX X-Fi with Bose Companion 2 speakers.
Power Supply Seasonic FOCUS Plus Series SSR-750PX 750W Platinum / SeaSonic X Series X650 Gold
Mouse SteelSeries Sensei (RAW) / Logitech G5
Keyboard Razer BlackWidow / Logitech (Unknown)
Software Windows 10 Pro (64-bit)
Benchmark Scores Benching is for bitches.
I just hope my new 1090T is still ok. I've decided to upgrade my mobo and ram. Until then everything will remain stock.
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
I just hope my new 1090T is still ok. I've decided to upgrade my mobo and ram. Until then everything will remain stock.

Keep us posted when the new stuff comes in.
 
Top