• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

OpenCL ticked OFF

pptmstr

New Member
Joined
May 14, 2020
Messages
3 (0.01/day)
hello all,
first post here. i am suspecting something might be going on with my OpenCL so i am hoping to ask the hive mind here.

here's some system info and a screen shot of GPU-Z for my GPU (1060). what seems odd is OFF status of OpenCL:

NVIDIA System Information report created on: 05/14/2020 09:55:31
System name: MCAW13
[Display]
Operating System: Windows 10 Home, 64-bit
DirectX version: 12.0
GPU processor: GeForce GTX 1060
Driver version: 445.87
Driver Type: Standard
Direct3D API version: 12
Direct3D feature level: 12_1
CUDA Cores: 1280
Core clock: 1404 MHz
Memory data rate: 8.01 Gbps
Memory interface: 192-bit
Memory bandwidth: 192.19 GB/s
Total available graphics memory: 14272 MB
Dedicated video memory: 6144 MB GDDR5
System video memory: 0 MB
Shared system memory: 8128 MB
Video BIOS version: 86.06.3E.00.10
IRQ: Not used
Bus: PCI Express x8 Gen3
Device Id: 10DE 1C20 07701028
Part Number: 2914 0030

[Components]

nvui.dll 8.17.14.4587 NVIDIA User Experience Driver Component
nvxdplcy.dll 8.17.14.4587 NVIDIA User Experience Driver Component
nvxdbat.dll 8.17.14.4587 NVIDIA User Experience Driver Component
nvxdapix.dll 8.17.14.4587 NVIDIA User Experience Driver Component
nvCplUIR.dll 8.1.940.0 NVIDIA Control Panel
nvCplUI.exe 8.1.940.0 NVIDIA Control Panel
nvWSSR.dll 26.21.14.4587 NVIDIA Workstation Server
nvWSS.dll 26.21.14.4587 NVIDIA Workstation Server
nvViTvSR.dll 26.21.14.4587 NVIDIA Video Server
nvViTvS.dll 26.21.14.4587 NVIDIA Video Server
nvDispSR.dll 26.21.14.4587 NVIDIA Display Server
NVMCTRAY.DLL 26.21.14.4587 NVIDIA Media Center Library
nvDispS.dll 26.21.14.4587 NVIDIA Display Server
nvDevToolS.dll 26.21.14.4587 NVIDIA 3D Settings Server
PhysX 09.19.0218 NVIDIA PhysX
NVCUDA.DLL 26.21.14.4587 NVIDIA CUDA 11.0.140 driver
nvGameSR.dll 26.21.14.4587 NVIDIA 3D Settings Server

nvGameS.dll 26.21.14.4587 NVIDIA 3D Settings Server

TechPowerUp GPU-Z 2.31.0 2020-05-14 10.11.40.jpg
TechPowerUp GPU-Z 2.31.0 2020-05-14 10.13.05.jpg


I installed and tried to run GeekBench 5.1.1 and CompuBench 2.0 and they both go silent after the initial "splash" screen.
I have the latest NVIDIA driver and my system is up to date. Everything seems "normal", even dxdiag mentions "no problems":

DirectX Diagnostic Tool 2020-05-14 11.37.38.jpg
DirectX Diagnostic Tool 2020-05-14 11.37.46.jpg
DirectX Diagnostic Tool 2020-05-14 11.37.56.jpg


I'm not even sure how to test this, but it feels like OpenCL is "broken".

I would very much appreciate any help.
Cheers,
Mihai
 
Joined
May 7, 2019
Messages
277 (0.37/day)
System Name Cheapskate Maximus
Processor Xeon W3680 @ 3.99Ghz [133x30] [1.375v]
Motherboard HP Z400 Rev 2
Cooling Alpenfohn Brocken v1
Memory 3 x 4GB DDR3-1600
Video Card(s) Sapphire RX570 Nitro+
Storage 240GB WD SSD, 6 x 2TB HDD
Display(s) 27" iiyama XB2783HSU AMVA+
Case AeroCool
Power Supply HP 600w Bronze (Delta)
Keyboard Gots keys
Software W10 x64
Might be worth using DDU to completely remove the Nvidia drivers then reinstall them freshly, that might sort it.

 
Joined
Feb 20, 2019
Messages
2,468 (3.03/day)
System Name Flavour of the month. I roll through hardware like it's not even mine (it often isn't).
Processor 3900X, 5800X, 2700U
Motherboard Aorus X570 Elite, B550 DS3H
Cooling Alphacool CPU+GPU soft-tubing loop (Laing D5 360mm+140mm), AMD Wraith Prism
Memory 32GB Patriot 3600CL17, 32GB Corsair LPX 3200CL16, 16GB HyperX 2400CL14
Video Card(s) 2070S, 5700XT, Vega10
Storage 1TB WD S100G, 2TB Adata SX8200 Pro, 1TB MX500, 500GB Hynix 2242 bastard thing, 16TB of rust + backup
Display(s) Dell SG3220 165Hz VA, Samsung 65" Q9FN 120Hz VA
Case NZXT H440NE, Silverstone GD04 (almost nothing original left inside, thanks 3D printer!)
Audio Device(s) CA DacMagic+ with Presonus Eris E5, Yamaha RX-V683 with Q Acoustics 3000-series, Sony MDR-1A
Power Supply BeQuiet StraightPower E9 680W, Corsair RM550, and a 45W Lenovo DC power brick, I guess.
Mouse G303, MX Anywhere 2, Another MX Anywhere 2.
Keyboard CM QuickFire Stealth (Cherry MX Brown), Logitech MX Keys (not Cherry MX at all)
Software W10
Benchmark Scores I once clocked a Celeron-300A to 564MHz on an Abit BE6 and it scored over 9000.
I came here to say DDU, didn't have to.
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
22,093 (3.56/day)
Processor Core i7-8700K
Memory 32 GB
Video Card(s) RTX 3080
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
Uninstall the Intel driver, check out that makes a difference, in the past intel is what caused most of the crashes
 

pptmstr

New Member
Joined
May 14, 2020
Messages
3 (0.01/day)
thank you everyone.
uninstalling the intel driver seems to restore that check box for OpenCL. it also allowed compubench to run.
windows seems to want to install the latest version, i hope this won't cause the issues again.

also the app that got me here in the first place (opencl parts of imagemagick cmd line) now runs properly.

thanks for the suggestion. any idea what i could do if this resurfaces after i install the intel driver(s) again?
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
22,093 (3.56/day)
Processor Core i7-8700K
Memory 32 GB
Video Card(s) RTX 3080
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
any idea what i could do if this resurfaces after i install the intel driver(s) again?
Use an older/newer Intel driver, and report the issue to back to them. This is 100% a bug in their drivers, resurfaces from time to time
 
Top