Overclock nvflash

[Marcelo88]

Hello,
I just set up my configuration and I would like to do a deeper oc of my graphics card my same oc card does not exceed 64 degrees fan at 35% so I would have liked to increase the voltage with nvflash.
I looked a little on the internet but very little tutorial and I don't want to do anything stupid lol is there a person who knows and who could help me?
My config
Intel i9 9900kf
16GB 3000mz
Graphics card gigabyte rtx 2080 super gaming windforce 3 ventilator model no oc
Msi mag z390 tomahawk motherboard
2 ssd m2
thank you in advance

 

[Caring1]

@eidairaman1 your knowledge is required.

 

[eidairaman1]

Hello,
I just set up my configuration and I would like to do a deeper oc of my graphics card my same oc card does not exceed 64 degrees fan at 35% so I would have liked to increase the voltage with nvflash.
I looked a little on the internet but very little tutorial and I don't want to do anything stupid lol is there a person who knows and who could help me?
My config
Intel i9 9900kf
16GB 3000mz
Graphics card gigabyte rtx 2080 super gaming windforce 3 ventilator model no oc
Msi mag z390 tomahawk motherboard
2 ssd m2
thank you in advance

Get a gpu-z screenshot.

In GPU-Z, click the arrow button next to the uefi checkbox, proceed to try and upload the bios through the program itself to the vga bios collection. It should state bios is already in collection with a link to the file, copy and paste the link to file here please.

 

[Marcelo88]

Get a gpu-z screenshot.

In GPU-Z, click the arrow button next to the uefi checkbox, proceed to try and upload the bios through the program itself to the vga bios collection. It should state bios is already in collection with a link to the file, copy and paste the link to file here please.

Thank you for your help
I share a link to download my bios rom I hope I understood what you wanted

TransferNow

Download your files now with TransferNow.net, the simple and free service for sending and sharing large files.

www.transfernow.net

 

[basco]

no ya can upload your bios to techpowerup with that arrow and click on it and use submit to online database in gpu-z.
you will find it

 

[Marcelo88]

no ya can upload your bios to techpowerup with that arrow and click on it and use submit to online database in gpu-z.
you will find it

Okay i think i understand i share the link

Gigabyte RTX 2080 Super VBIOS

8 GB GDDR6, 1650 MHz GPU, 1938 MHz Memory

www.techpowerup.com

Get a gpu-z screenshot.

In GPU-Z, click the arrow button next to the uefi checkbox, proceed to try and upload the bios through the program itself to the vga bios collection. It should state bios is already in collection with a link to the file, copy and paste the link to file here please.

Gigabyte RTX 2080 Super VBIOS

8 GB GDDR6, 1650 MHz GPU, 1938 MHz Memory

www.techpowerup.com

Just 1 MHz difference on gpu-z 1938 MHz memory

 

[basco]

yes man thats it and just wait for eidairaman1 he is the king of bios flash.
your bios will get verified soon

 

[Marcelo88]

yes man thats it and just wait for eidairaman1 he is the king of bios flash.
your bios will get verified soon

OK thanks so much

 

[eidairaman1]

OK thanks so much

I will be looking at your card

Flash this bios and see how the card handles it. Power level is 50W higher.

Gigabyte RTX 2080 Super VBIOS

8 GB GDDR6, 1650 MHz GPU, 1938 MHz Memory

www.techpowerup.com

NVIDIA NVFlash with Board Id Mismatch Disabled v5.590.0 Download

This is a patched version of NVIDIA's NVFlash. On Turing cards, NVFlash no longer allows overriding of the "board ID mismatch" message through comm

www.techpowerup.com

 

[Marcelo88]

Merci beaucoup. Existe-t-il un tutoriel fiable pour faire l'installation?

I will be looking at your card

Flash this bios and see how the card handles it. Power level is 50W higher.

Gigabyte RTX 2080 Super VBIOS

8 GB GDDR6, 1650 MHz GPU, 1938 MHz Memory

www.techpowerup.com

NVIDIA NVFlash with Board Id Mismatch Disabled v5.590.0 Download

This is a patched version of NVIDIA's NVFlash. On Turing cards, NVFlash no longer allows overriding of the "board ID mismatch" message through comm

www.techpowerup.com

Thank you very much is there a reliable tutorial to do the installation?

 

[eidairaman1]

Go on youtube and look up a current nvflash video

 

[Marcelo88]

Go on youtube and look up a current nvflash video

I managed to install the rom no worries except that its did not change anything in terms of voltage and performance I tested another rom?

I tried all the gigabate roms I do not exceed 1050 mv and the nvidia control panel disappears

 

[eidairaman1]

I managed to install the rom no worries except that its did not change anything in terms of voltage and performance I tested another rom?

I tried all the gigabate roms I do not exceed 1050 mv and the nvidia control panel disappears

It extended your max boost and power level by 50 watts

 

[Marcelo88]

It extended your max boost and power level by 50 watts

However I do not get overclocked more than before and I am still at 1.050 mv as before normal

 

[basco]

this newer cards don't respond too well to more voltage =gets hotter=boosts lower.
do you use msi afterburner to lift up those temp+power limits?
and in gpu-z sensor page ya could see if your boost is higher.
and can i ask what mhz you are at? when ya say not overclocked more then before?

 

[Marcelo88]

this newer cards don't respond too well to more voltage =gets hotter=boosts lower.
do you use msi afterburner to lift up those temp+power limits?
and in gpu-z sensor page ya could see if your boost is higher.
and can i ask what mhz you are at? when ya say not overclocked more then before?

Hi boost max oc 1980 mhz more it crashes exactly as before the flash

 

[basco]

with temp + power limit at maximum?

 

[Marcelo88]

with temp + power limit at maximum?

Yes, I do not understand with 50w more I should be able to go higher elsewhere since the flash impossible to reinstall the panel nvidia control which disappeared..

 

[basco]

my 1080ti does not want to go over 1960mhz much too but its reference design and 50mhz more wont help us much.
what i do is fix the clock on afterburner so that its runs on a steady mhz like 1900mhz with a hefty undervolt.

after a flash its sometimes good to reinstall the driver

and please give us a gpu-z screenshot-thanks

is your gpu an A-chip?
look here:

Geforce RTX 2070 and 2080: No A- and non-A-chips anymore?

If you can remember it, the RTX 2070 and 2080 are each based on two GPU models, the A and non-A revisions where the A model is the more premium GPU with more power and longer boost allowance. ...

www.guru3d.com

 

[Marcelo88]

[QUOTE = "basco, post: 4234247, membre: 72541"]
mon 1080ti ne veut pas trop dépasser 1960 mhz mais sa conception de référence et 50 mhz de plus ne nous soutenons pas beaucoup.
ce que je fais, c'est fixer l'horloge sur la postcombustion de façon à ce qu'elle fonctionne sur un mhz stable comme 1900mhz avec un fort sous-tension.

après un flash, il est parfois bon de réinstaller le pilote

et veuillez nous donner une capture d'écran gpu-z-merci

votre GPU est-il une puce A?
regardez ici:
[URL unfurl = "true"] https://www.guru3d.com/news-story/geforce-rtx-2070-and-2080-no-a-and-non-a-chips-anymore.html [/ URL ]
[/CITATION]


Je ne savais pas s'il avait un A, et je réinstalle le pilote graphique

[QUOTE = "Marcelo88, poste: 4234285, membre: 195775"]
[QUOTE = "basco, post: 4234247, membre: 72541"]
mon 1080ti ne veut pas trop dépasser 1960 mhz mais sa conception de référence et 50 mhz de plus ne nous soutenons pas beaucoup.
ce que je fais, c'est fixer l'horloge sur la postcombustion de façon à ce qu'elle fonctionne sur un mhz stable comme 1900mhz avec un fort sous-tension.

après un flash, il est parfois bon de réinstaller le pilote

et veuillez nous donner une capture d'écran gpu-z-merci

votre GPU est-il une puce A?
regardez ici:
[URL unfurl = "true"] https://www.guru3d.com/news-story/geforce-rtx-2070-and-2080-no-a-and-non-a-chips-anymore.html [/ URL ]
[/CITATION]


Je ne savais pas s'il avait un A, et je réinstalle le pilote graphique
[/CITATION]

 

[basco]

mi francais e male perdonne moa

i think it should say TU104A or TU104

and 2040mhz e fantastique

 

[Marcelo88]

Your French is very good lol

Just before the flash I could oc similar I have no difference before and after the flash

 

[basco]

merci mon amy

my card does the same mhz with power+temp limits to the max or not.
its just the silicon e la fin je pense

and NVIDIA restricts the overclocking especially the overvolting very much with every new generation more + more

maybe @eidairaman1 can tell us whats the limiting factor here?

 

[Marcelo88]

Well I managed to have a voltage of 1.093
Gpu 2160 MHz
Memory 2313 (+1500)
Temperature 59 max with several 3d tests
Mark

 

[basco]

excellente-bravo thats a good oc there