Extr3me_Rob
New Member
- Joined
- Jan 28, 2012
- Messages
- 1 (0.00/day)
Processor | i7 2600k |
---|---|
Motherboard | P8z68-v Pro |
Cooling | Water cooling loops for CPU and Trifire |
Memory | 8GB Kingston T1 2133Mhz |
Video Card(s) | ScanFX HD 6990 and XFX HD 6970 in Trifire |
Storage | 600GB Velociraptor |
Hay all,
I've just finished my water cooling loop for my ScanFX HD 6990 and XFX 6970 cards. I'm looking to increase the voltage to both cards so I can improve my overclock using CCC.
I used RBE 1.28 to increase the VID4 from 1175mV to 1250mV for the Master and Slave BIOS with the HD 6990 with no issues.
When I load the XFX HD 6970 BIOS, I don't get the option to change the GPU Registers and thus, can't change the VID4.
I've read that changing anything else but VID4 on 69xx cards can lead to issues. Can anyone offer and advice?
Pics can be found here:
http://www.overclock.net/t/968084/amd-radeon-6990-club/3830#post_16310670
I've just finished my water cooling loop for my ScanFX HD 6990 and XFX 6970 cards. I'm looking to increase the voltage to both cards so I can improve my overclock using CCC.
I used RBE 1.28 to increase the VID4 from 1175mV to 1250mV for the Master and Slave BIOS with the HD 6990 with no issues.
When I load the XFX HD 6970 BIOS, I don't get the option to change the GPU Registers and thus, can't change the VID4.
I've read that changing anything else but VID4 on 69xx cards can lead to issues. Can anyone offer and advice?
Pics can be found here:
http://www.overclock.net/t/968084/amd-radeon-6990-club/3830#post_16310670