Ive send this in a PM:
Originally Posted by Juggernaut1987
Originally Posted by demonbrawn
I saw in a recent post where you set you could edit the bios of a video card in order to keep fan settings optimal w/out using ATITool? Could you send me a site that has a walkthrough of how to do this?
Get Rabit 2.1 here:
http://www.techpowerup.com/downloads/283
Get Atitool here:
http://www.techpowerup.com/downloads/259
Go into atitool, settings, misscelanius, save vga bios to file.
Now you have your VGA bios saved as a file on your desktop.
Start Rabit
Open the bios on your desktop
Go to features. enviroment monitor.
Here you see many different entry's
Select the top entry (which determines fan speed at 0 degrees, thus is the fan standard speed)
Then the second one which probably is 60. In the first box next to the selection box you will see the temp. In the second one the fan speed. Just make it closer to full speed which is 100%.
Do this for all temps you see in the selection box so that you think your card will be cool enough, save the bios, flash it to the card in dos.
Good luck!