- Joined
- Jun 11, 2007
- Messages
- 192 (0.03/day)
Processor | i7-3770K @ 45x100 |
---|---|
Motherboard | P8Z77-V Pro |
Cooling | Noctua NH-D14 |
Memory | G.SKILL Ripjaws X Series (2 x 8GB) DDR3 1600/F3-1600C9D-16GXM |
Video Card(s) | Onboard HD4000 |
Storage | Vertex 4 128 GB + other HDDs |
Case | P183 |
Power Supply | Seasonic SS-560KM |
I just bought a pair of BL2KIT12864AA1065 and they will work in any mode except the fastest two. These work fine: 1:1 (533 MHz), 4:5 (667 MHz), and 2:3 (800 MHz). If I boot them in in 3:5 (889 MHz) or 1:2 (1,066 MHz) windows will not start.
If I boot into Memtest86+ V1.70, they give TONS of errors in the faster two modes, but are just fine in the lower 3 modes... I've tried manually setting the timings/voltage and also letting the board do it with no luck either case. I'm using 5-5-5-15-4-30-10-10-10-11 @ 2.25 v initially.
I have a P5B-Deluxe running BIOS 1215. Anyone else out there have this board with these sticks? I'm thinking since I get errors at the higher modes, it's my board, not the memory.
Opinions are welcome.
Thanks!
Additional info: q6600, x1950 pro 512 meg. I normally run the system @ 9x333 @ 1.2625vcore with my old memory (DDR2-800 ballistix @ 1:1 with these timings: 4-4-4-12-4-20-10-10-10-11)
If I boot into Memtest86+ V1.70, they give TONS of errors in the faster two modes, but are just fine in the lower 3 modes... I've tried manually setting the timings/voltage and also letting the board do it with no luck either case. I'm using 5-5-5-15-4-30-10-10-10-11 @ 2.25 v initially.
I have a P5B-Deluxe running BIOS 1215. Anyone else out there have this board with these sticks? I'm thinking since I get errors at the higher modes, it's my board, not the memory.
Opinions are welcome.
Thanks!
Additional info: q6600, x1950 pro 512 meg. I normally run the system @ 9x333 @ 1.2625vcore with my old memory (DDR2-800 ballistix @ 1:1 with these timings: 4-4-4-12-4-20-10-10-10-11)