- Joined
- Jul 30, 2007
- Messages
- 145 (0.02/day)
| System Name | Orion R7 |
|---|---|
| Processor | AMD Ryzen7 1700 at 4GHz |
| Motherboard | ASUS Crosshair 6 Hero |
| Cooling | Noctua HN-D15 |
| Memory | 2x 8GB DDR4 3200MHz G.SKILL TridentZ RGB |
| Video Card(s) | EVGA NVIDIA GTX1080 ti FE |
| Storage | 500GB Samsung NVMe SSD + 500GB Samsung SATA + 1TB HGST HDD |
| Display(s) | AOC 27" 1080P |
| Case | CM HAF |
| Audio Device(s) | Sound Blaster Z |
| Power Supply | 650W EVGA G2 |
| Software | Microsoft Windows 10 1709 Fallen Creatures :) Update 64bit |
Hi all
After some troubles with the 3870X2 I'm happy to announce that it is time to Brick my CPU!
So I've been overclocking CPUs since the Intel 80468DX4 and lets say that I know what I'm doing! My last MB is the ASUS P5N32-E SLI nForce 680i SLI that many of you know very good! With the right BIOS (1203 that everyone at the ASUS Forums says it is the best for OCing Q6600) I can go to 3000MHz without any problems! I just change the FSB to 1333MHz and everything is OK. I use Liquid cooling for the CPU so at this frequency it is 45C at full quad core load and 30C at idle. I see that allmost everyone here is clocking the Q6600 at atleast 3600MHz. Can someone with the same MB explain my what should I do to the chipset voltages, HT Link voltage and multiplier, RAM Controller voltage, CPU Termination voltage, DDRII Termination Voltage, and so on. Many of the settings in the BIOS ar new to me and I don't know what is the best combination for my exact case!
Any help will be apreciated!
Excuse my English!
After some troubles with the 3870X2 I'm happy to announce that it is time to Brick my CPU!
So I've been overclocking CPUs since the Intel 80468DX4 and lets say that I know what I'm doing! My last MB is the ASUS P5N32-E SLI nForce 680i SLI that many of you know very good! With the right BIOS (1203 that everyone at the ASUS Forums says it is the best for OCing Q6600) I can go to 3000MHz without any problems! I just change the FSB to 1333MHz and everything is OK. I use Liquid cooling for the CPU so at this frequency it is 45C at full quad core load and 30C at idle. I see that allmost everyone here is clocking the Q6600 at atleast 3600MHz. Can someone with the same MB explain my what should I do to the chipset voltages, HT Link voltage and multiplier, RAM Controller voltage, CPU Termination voltage, DDRII Termination Voltage, and so on. Many of the settings in the BIOS ar new to me and I don't know what is the best combination for my exact case!
Any help will be apreciated!
Excuse my English!
