• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

paulieg's first watercooling adventure, help wanted!

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
yeah the case looks nice
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I just got my Dtek Fusion delivered this morning from Petra's. Damn they are fast. Not to mention they included a personal note stating they switched out the fittings to 3/8" free of charge since the Fusion only comes with 1/2". They also included a free Petra's pen. Nice little touch. I'll post pictures later. The rest of my stuff should be here by Tuesday from performance-pc.
 

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
yeah got a pen and note from them

why didnt you get V2 cost ?
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
When I mount the Rad at the top of the case, should the in/out nipples face toward the front or back of the case. As for the pump, is it ok to mount it to the bottom of the case with velcro, or does it have to be bolted in?
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
yeah got a pen and note from them

why didnt you get V2 cost ?

I got the v1 with pro mount for $47. I couldn't justify the extra cost for the v2. I'm already over budget, and this was a good deal.
 

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
When I mount the Rad at the top of the case, should the in/out nipples face toward the front or back of the case. As for the pump, is it ok to mount it to the bottom of the case with velcro, or does it have to be bolted in?
I use velcro and the back cuz where are going to put the res ?

I got the v1 with pro mount for $47. I couldn't justify the extra cost for the v2. I'm already over budget, and this was a good deal.
yeah i payed like 65 when i got mine with out the pro mount
 
Last edited:

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
I got the v1 with pro mount for $47. I couldn't justify the extra cost for the v2. I'm already over budget, and this was a good deal.

Hey, yo! Paulie. Am I correct to assume that you have all your parts? I mean that they are all in. I wanna pics of the newborn. I bet it will have your nose... and erockers eyes :p
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Hey, yo! Paulie. Am I correct to assume that you have all your parts? I mean that they are all in. I wanna pics of the newborn. I bet it will have your nose... and erockers eyes :p

LOL. No. The rest of my order comes in on Tuesday. Right now I just have the Dtek block and tubing.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
I just got my Dtek Fusion delivered this morning from Petra's. Damn they are fast. Not to mention they included a personal note stating they switched out the fittings to 3/8" free of charge since the Fusion only comes with 1/2". They also included a free Petra's pen. Nice little touch. I'll post pictures later. The rest of my stuff should be here by Tuesday from performance-pc.
Yeah, Petra's is one of my favorite places to order. It's rare to find a place with the personal touch anymore. I have a bunch of those pens floating around. lol.

When I mount the Rad at the top of the case, should the in/out nipples face toward the front or back of the case. As for the pump, is it ok to mount it to the bottom of the case with velcro, or does it have to be bolted in?
It doesn't matter which way the fittings face on your rad. Just do a mock-up without tubing, and decide where you want your res and pump (which is fine to mount at the bottom with velcro), then decide which way to face the rad for both the easiest access and the shortest tubing runs.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
OK, I'm thinking of adding the NB to the loop too. It's already set up for WC. Suggestions on how to best intergrate the NB with this loop?
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
OK, I'm thinking of adding the NB to the loop too. It's already set up for WC. Suggestions on how to best intergrate the NB with this loop?

Normally, people would make a new loop. You would have to include another rad to the mix.

Res > CPU > Rad > NB > Rad > Res

Hopefully, you have a nice pump. I've seen some pretty funky setups:

Res > CPU > Rad > little booster Pump > GPU > Rad > Mobo coverage(NB + Phase) > Rad > Res
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
no need for the extra rad IMHO...wouldnt hurt, but not needed! Just add it in after the CPU and be happy!
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
no need for the extra rad IMHO...wouldnt hurt, but not needed! Just add it in after the CPU and be happy!

One thing that make it complicated. How the hell do I test the loop for leaks outside of the case, with the NB block attached to the MB?:wtf:
 
Joined
Dec 5, 2006
Messages
7,704 (1.22/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
One thing that make it complicated. How the hell do I test the loop for leaks outside of the case, with the NB block attached to the MB?:wtf:

thats why you get some low dollar tube at the hardware store. Just cut some bits and run the lop outside. if its on the board already, just make it so the board is suspended upside down. that way no leaks hit the mobo. With Distilled water, you could just let it dry if it did drip and start when you are sure its dry, but I like the idea of not giving it that chance!
 

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
Res > Rad > Pump > CPU > NB > Res

I would just make sure the block fittings and screws are tight and snudge and the res and rad also and hook it up like you want then just put some water in the loop untill the res almost full just jump start the psu and stop it fill again un till you loop has water

also take off the power to the mobo, gpu etc. just in case it leaks or just run the pump off another psu cuz does it come with a 3pin to 4 pin ?
 
Joined
Dec 5, 2006
Messages
7,704 (1.22/day)
System Name Back to Blue
Processor i9 14900k
Motherboard Asrock Z790 Nova
Cooling Corsair H150i Elite
Memory 64GB Corsair Dominator DDR5-6400 @ 6600
Video Card(s) EVGA RTX 3090 Ultra FTW3
Storage 4TB WD 850x NVME, 4TB WD Black, 10TB Seagate Barracuda Pro
Display(s) 1x Samsung Odyssey G7 Neo and 1x Dell u2518d
Case Lian Li o11 DXL w/custom vented front panel
Audio Device(s) Focusrite Saffire PRO 14 -> DBX DriveRack PA+ -> Mackie MR8 and MR10 / Senn PX38X -> SB AE-5 Plus
Power Supply Corsair RM1000i
Mouse Logitech G502x
Keyboard Corsair K95 Platinum
Software Windows 11 x64 Pro
Benchmark Scores 31k multicore Cinebench - CPU limited 125w
As for leaks, get a water level sensor with an alarm and have it trigger a relay to cut your power...

I have setup servers that are water cooled that same way, works wonders and its pretty safe.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
One thing that make it complicated. How the hell do I test the loop for leaks outside of the case, with the NB block attached to the MB?:wtf:

Just unplug all power from the mobo, and put paper towels around the NB and cpu blocks. You should leak test it in your case anyway. Testing it outside of the case, then putting it in the case afterwards can lead to leaks from moving the loop around. (Trust me, I saw it first hand). That method of leak testing never made any sense to me.

Once you get it up and going, you are going to smack yourself upside the head from worrying about it so much. lol. It is so much easier than you think it is.

My personal preference for loop order in this setup would be res>pump>cpu>NB>rad>res. When you set up your tubing, make sure you have all of your cards installed, so you know how to route everything the best. I learned that one the hard way too. lol.
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
no need for the extra rad IMHO...wouldnt hurt, but not needed! Just add it in after the CPU and be happy!

The reason I added the extra rad is because you would be bringing the heated water from the CPU to the NB, so it wouldn't cool down properly. You are correct, though. You can just go straight through. ;)
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Res > Rad > Pump > CPU > NB > Res

I would just make sure the block fittings and screws are tight and snudge and the res and rad also and hook it up like you want then just put some water in the loop untill the res almost full just jump start the psu and stop it fill again un till you loop has water

also take off the power to the mobo, gpu etc. just in case it leaks or just run the pump off another psu cuz does it come with a 3pin to 4 pin ?

I'm not sure if it comes with a 3 to 4 pin. I'll know more tonight. :). Should the entire loop and res be completely full of water/coolant? By the way, I should have the rest of my parts tonight. I'll post some pics.
 
Last edited:
Joined
Jun 21, 2006
Messages
900 (0.14/day)
Location
Canada
System Name MurderBox #17
Processor Intel Core i7 5930k - 4.5Ghz 1.275v - Bitspower Summit EF
Motherboard Asus X99-E WS - Bitspower THOR AIX99 Full Full Board Block
Cooling SR-1 480, 8x Corsair ML120 , MCP350, I&H Res 250, PETG hard pipe, Mayhems Pastel White
Memory 32GB G.Skill Ripjaws 4 DDR4 2666
Video Card(s) Nvidia GTX 1080 Ti Founders Edition - EK Fullcover waterblock with Backplate
Storage 970 Pro 512GB, 960 EVO 500GB, PM961 512GB, 3x SM951 256GB,, WD Black 2TB, Seagate 4TB
Display(s) ASUS PG348Q 3440x1440, 2X ASUS PB278 2560x1440
Case MurderMod TJ07 With Illuminated mid-plate
Audio Device(s) Schiit Bifrost > Schiit Asgard > Hifiman HE400i - Audio Technica AT2020
Power Supply Corsair AX1200i With custom MDPC Sleeve and Noctua NF-A14 iPPC-3000 PWM
Mouse Steelseries Rival 600
Keyboard Corsair K95 RGB
Software Microsoft Windows 10 Professional 64bit
On an MCRES it does not have to be completely full. It will run just fine as long as the water level does not drop below the angled piece of acrylic inside the reservoir. But filling it to the top can't hurt as it gives you a little more fluid which will slightly increase the heat capacity of the system.

I look forward to seeing some pics. The first loop is always exciting and takes a lot of time to get exactly how you want.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
On an MCRES it does not have to be completely full. It will run just fine as long as the water level does not drop below the angled piece of acrylic inside the reservoir. But filling it to the top can't hurt as it gives you a little more fluid which will slightly increase the heat capacity of the system.

I look forward to seeing some pics. The first loop is always exciting and takes a lot of time to get exactly how you want.

Man, I can't wait, but I may not be able to get it going until Saturday. I have a build to do for a customer, in addition to my day job.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Just unplug all power from the mobo, and put paper towels around the NB and cpu blocks. You should leak test it in your case anyway. Testing it outside of the case, then putting it in the case afterwards can lead to leaks from moving the loop around. (Trust me, I saw it first hand). That method of leak testing never made any sense to me.

Once you get it up and going, you are going to smack yourself upside the head from worrying about it so much. lol. It is so much easier than you think it is.

My personal preference for loop order in this setup would be res>pump>cpu>NB>rad>res. When you set up your tubing, make sure you have all of your cards installed, so you know how to route everything the best. I learned that one the hard way too. lol.

Yeah, I think I prefer your method of testing. It seems like a real pain to leak test outside the case. I hope you are right about how easy it really is. :) I always worry too much about this stuff the first time around. LOL
 
Joined
Jun 21, 2006
Messages
900 (0.14/day)
Location
Canada
System Name MurderBox #17
Processor Intel Core i7 5930k - 4.5Ghz 1.275v - Bitspower Summit EF
Motherboard Asus X99-E WS - Bitspower THOR AIX99 Full Full Board Block
Cooling SR-1 480, 8x Corsair ML120 , MCP350, I&H Res 250, PETG hard pipe, Mayhems Pastel White
Memory 32GB G.Skill Ripjaws 4 DDR4 2666
Video Card(s) Nvidia GTX 1080 Ti Founders Edition - EK Fullcover waterblock with Backplate
Storage 970 Pro 512GB, 960 EVO 500GB, PM961 512GB, 3x SM951 256GB,, WD Black 2TB, Seagate 4TB
Display(s) ASUS PG348Q 3440x1440, 2X ASUS PB278 2560x1440
Case MurderMod TJ07 With Illuminated mid-plate
Audio Device(s) Schiit Bifrost > Schiit Asgard > Hifiman HE400i - Audio Technica AT2020
Power Supply Corsair AX1200i With custom MDPC Sleeve and Noctua NF-A14 iPPC-3000 PWM
Mouse Steelseries Rival 600
Keyboard Corsair K95 RGB
Software Microsoft Windows 10 Professional 64bit
If you are worried about slow leaks mount your Mcres where it can be seen and when you fill it and bleed it mark the water level with a piece of tape or something and just keep an eye on it to see if it drops at all.

Have you ever taken the stock heatsinks off your Maximus. I did to change the thermal paste (before I ditched it all for 4 waterblocks) and it made a good difference in the temperatures on the NB and SB.

Oh and yeah I leak tested outside my case and when Installing it a barb came slightly unscrewed and it caused leaking, lucky I leak tested twice.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
If you are worried about slow leaks mount your Mcres where it can be seen and when you fill it and bleed it mark the water level with a piece of tape or something and just keep an eye on it to see if it drops at all.

Have you ever taken the stock heatsinks off your Maximus. I did to change the thermal paste (before I ditched it all for 4 waterblocks) and it made a good difference in the temperatures on the NB and SB.

Oh and yeah I leak tested outside my case and when Installing it a barb came slightly unscrewed and it caused leaking, lucky I leak tested twice.

Yeah, the guy I bought the Maximus from replaced the stock TIM with AS5 before he sold it to me.
 
Top