• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

PC Wizard motherboard temp

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Is the motherboard temp reading in PC wizard the northbridge? I need to know cause my northbridge fan has been making some rattling noise and I want to just unplug it. It has a copper heatsink on it so it might run passively... not sure
although PC wizard can't be fully trusted, it says my +12 rail is putting out 11.08v, and it says my CPU is running at 67c, both are impossible cause I got a Corsair 450vx, one of the best manufactures in the world, and if my cpu was really 67c I would have mad stability errors, and coretemp says 50c anyway :/

my motherboard:
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Well, since this is way way down on the bottom of the page.... bump
 

Namslas90

New Member
Joined
Aug 27, 2006
Messages
4,846 (0.75/day)
Location
Earth
Usually it measures the temp sensor on the motherboard, what mobo is that?
 
  • Like
Reactions: hat

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
DFI Lanparty UT 590 SLI
speedfan freezes my computer...
 
Joined
Jul 29, 2007
Messages
392 (0.06/day)
Location
Portugal
System Name Lil'Lighty
Processor Intel Core i3 530 @ Stock
Motherboard Asus P7P55D
Cooling Artic Cooling Freezer Pro Rev.2
Memory Gskill Ripjaw 1600MHz 9-9-9-24 8GB
Video Card(s) MSI GeForce GTX650 OC 1GB
Storage WD Blue 500GB AAKS
Display(s) ASUS 20'
Case Aerocool Aeroengine II // Two 120mm Blue Fans
Audio Device(s) Creative SoundBlaster LE // Logitech X-230
Power Supply Corsair VX450W
Software Windows 8.1 Pro x64
You are not the only one... perhaps it has to be speedfan not liking nForce chipsets?
Speedfan worked on my pc... for a while. Then EVERY that I opened it my pc stops responding. Reset FTW!!

About PC Wizard, yes it reads from the motherboard chip, but would be better to monitorize temperatures with Everest.:)
 
Last edited:
  • Like
Reactions: hat

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Will see what Everest ultimate says, I know Everest Home was reading my +12 rail as something like 10.8v, so it's not exactly trustworthy either
 
Joined
Jul 29, 2007
Messages
392 (0.06/day)
Location
Portugal
System Name Lil'Lighty
Processor Intel Core i3 530 @ Stock
Motherboard Asus P7P55D
Cooling Artic Cooling Freezer Pro Rev.2
Memory Gskill Ripjaw 1600MHz 9-9-9-24 8GB
Video Card(s) MSI GeForce GTX650 OC 1GB
Storage WD Blue 500GB AAKS
Display(s) ASUS 20'
Case Aerocool Aeroengine II // Two 120mm Blue Fans
Audio Device(s) Creative SoundBlaster LE // Logitech X-230
Power Supply Corsair VX450W
Software Windows 8.1 Pro x64
Mesauring voltages by software isn't 100% accurate. You should get a multimeter for that thing.

But I think that everest can be the best determining CPU and Northbridge temps. I remembered another good program, but I can't find the name in my head.
 
  • Like
Reactions: hat

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Hm, Everest Ultimate reads my +12 correctly, 12.03v, actually better than it should be (that's under load!)

The only complaint I have with it is it ready my CPU temp 30C too high. It thinks CPU temp is core temp +15c, not -15c... my CPU seems to be a cool 40C under full load though using core temp -15c. It reads the cores correctly... heh

Anyways thanks, will try the passive northbridge now.
 
Joined
Jul 29, 2007
Messages
392 (0.06/day)
Location
Portugal
System Name Lil'Lighty
Processor Intel Core i3 530 @ Stock
Motherboard Asus P7P55D
Cooling Artic Cooling Freezer Pro Rev.2
Memory Gskill Ripjaw 1600MHz 9-9-9-24 8GB
Video Card(s) MSI GeForce GTX650 OC 1GB
Storage WD Blue 500GB AAKS
Display(s) ASUS 20'
Case Aerocool Aeroengine II // Two 120mm Blue Fans
Audio Device(s) Creative SoundBlaster LE // Logitech X-230
Power Supply Corsair VX450W
Software Windows 8.1 Pro x64
Perhaps the northbridge will run passively but nForce chipsets are known by it's heat so do a stability test after that.:):)
 
  • Like
Reactions: hat

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
i dunno if I can trust everest with the temp though. It says 42c idle, 42c under load (F@H SMP), 41 under load with the window open (winter), and idle 40c (again, window open)

seem normal?
 
Joined
Sep 3, 2007
Messages
59 (0.01/day)
Location
Birmingham, UK
Processor Q6600@3.2Ghz
Motherboard GA-965P-DS3 rev 3.3 F13q
Cooling 90mm 3x 80mm Akasa AK-965 LGA 775 Core 2 Quad Heatpipe PWM Cooler
Memory 4 Gig
Video Card(s) 8800 Gt 512Mb
Storage 120gig, 160gig, 200gig, 250gig
Display(s) 19" HPvs19e
Case Casecom
Audio Device(s) Realtek On borad 5.1
Power Supply 680w Generic
Software Windows Vista 64bit
everest is wierd i have a quad core on cpu info it showed cores 1,2 and 4 at 2.8 and core 3 at 4.0.:eek:
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.41/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Nope. I think I can trust Everest Ultimate with everything except CPU temp though... I also got rid of a few progs Everest Ultimate already had a version of built in, cpuz was no longer needed, nor was coretemp...

Yeah I did an Orthos stability test and after a few minutes it got up to 55c, when I touched the heatsink... it was hot to the touch! Full load otherwise remained under 45c.

Never thought that fan would be so effective... although it's only like 40mm and moves <5 CFM of air, it cools the heatsink! I guess the heatsink was designed for it... its a good heatsink

oh well
 
Top