Very true. I guess it can be worthwhile when ordering a lot of stuff since they do tend to have quite good selection. NCIX and tiger seem to never have things I want and unfortunately here in Montreal local retailers are just brutal. It makes the newegg shipping seem good.
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Phanteks PH-TC14PE
- Thread starter crazyeyesreaper
- Start date
- Joined
- Mar 25, 2009
- Messages
- 9,760 (1.77/day)
- Location
- 04578
| System Name | Old reliable |
|---|---|
| Processor | Intel 8700K @ 4.8 GHz |
| Motherboard | MSI Z370 Gaming Pro Carbon AC |
| Cooling | Custom Water |
| Memory | 32 GB Crucial Ballistix 3666 MHz |
| Video Card(s) | MSI GTX 1080 Ti Gaming X |
| Storage | 3x SSDs 2x HDDs |
| Display(s) | Dell U2412M + Samsung TA350 |
| Case | Thermaltake Core P3 TG |
| Audio Device(s) | Samson Meteor Mic / Generic 2.1 / KRK KNS 6400 headset |
| Power Supply | Zalman EBT-1000 |
| Mouse | Mionix NAOS 7000 |
| Keyboard | Mionix |
yea it all depends on location. When getting items you want for prices that dont suck.
- Joined
- May 8, 2013
- Messages
- 7 (0.00/day)
true; i have 1 since launch day and still going strong; i move my pc once a month like 10 miles on "bumpy roads" like you say(well i have a jeep YJ so every road its bumpy
and for the fun/testing i installed 3 Cooler master excalibur: now i have 5/6 degrees better temps than before under full load (full rpm) and i can beat any CLC systems available easily
8120 4.6ghz 1.41volts inside a thermaltake chaser MK1 with all fans installed (rear fan and grill removed, top front intake, rear top exhaust) 43degrees all cores full load
best air cooler available
How did you oc your 8120 to 4.6GHz with just 1.41v and have 43 degrees?!
I can't get mine past 4.1ghz with nh-d14 using msi 990fxa-gd80.. what mb do you have?
- Joined
- May 22, 2010
- Messages
- 2,516 (0.50/day)
- Location
- Canada
| System Name | m1dg3t | DeathBox | HairPi 3 |
|---|---|
| Processor | 3570k @ 4.0 1.15v BIOS | q9550 @ 3.77 1.325v BIOS |
| Motherboard | Asrock z77e iTX | p5q Dlx 2301 BIOS |
| Cooling | Custom Water | D-14 & HR-03gt | Passive HSF |
| Memory | Samsung MV-3V4G3D 4g x 2 @ 1866 1.35v | OcZ RpR 2g x 4 @ 1067 2.2v |
| Video Card(s) | MSi 7950 tf3 @1000 / 1350 | Asus 5870 V2 @ 900 / 1275 |
| Storage | Adata sx900 256Gb / WD 2500 HHTZ | WD 1001 FALS x 2 |
| Display(s) | BenQ gw2750hm | 46" Sharp Quatron |
| Case | BitFenix Prodigy - m0dd3d | Antec Fusion Remote MAX |
| Audio Device(s) | Onboard Toslink > Yamaha HTR 6290 | Xonar HDAV1.3 > Yamaha DSP z7 |
| Power Supply | Ocz mXp700w | Ocz zx850w | Cannakit 5v 2.5a |
| Mouse | Logitech G700s | Logitech G9x - Cable Repaired |
| Keyboard | TT Meka G1 - Black w Cherry Blacks| Logitech G11 |
| Software | Win7 Home | Xp sp3 & Vista ultimate | Raspbian |
| Benchmark Scores | Epeen!! Who needs epeen?? |
it depends on what your looking for M1dg3t I wanted a Mass Effect 3 mouse pad from razer as it was red and black matched my entire theme. only 10 i could find in the world via english language mind you of which 8 were in china and 2 were in CanadaThankfully a fellow TPUer helped me out but I digress depends on what you want or look for. Hopefully Phanteks will start to move into canada with greater presence in the near future. The PH-TC14PE is certainly a great cooler. enough so that I will use it in my secondary rig.
Strange how things go sometimes
We can get the majority of mainstream items here but speciality items/shops can be tricky to come by 
We used to have a PC watercooling/mod store in Toronto but it went tits up about 4/5 years ago, i don't know why really. 
They were the only FrozenCPU like store in Canada, that i knew/know about anyways I think they can now be sourced from Newegg.ca, Ncix.ca & CanadaComputers.com. At the time i purchased, over a year ago now, they were nowhere to be found in Canada
I try to shop @ CanadaComputers as much as possible, both Newegg & Ncix are American companies. Ncix has fucked me over on several occaisions as well, so i try to avoid them alltogether TBH.
Huguito
New Member
- Joined
- Mar 27, 2013
- Messages
- 23 (0.01/day)
- Location
- in my house
How did you oc your 8120 to 4.6GHz with just 1.41v and have 43 degrees?!
Sorry, it was at 4.375 @ 1.41; at the moment of my post i was working on a 4.6GHZ OC my bad..
currently 4.625 (250*18.5) at 1.43v
I replaced the original fans with 3 cooler master excalibur wich moves a lot more air with a Truck Load of pressure; for reference with 2 fans only i can feel air coming back from the heatsink with the excalibur easily, with the stock fans that didnt happen
Im not in my home right now so i cant post screenies, sorry (later i will
)
- Joined
- Nov 1, 2011
- Messages
- 316 (0.07/day)
| System Name | 3D Vision & Sound Blaster |
|---|---|
| Processor | Intel Core i5 2500K @ 4.5GHz (stock voltage) |
| Motherboard | Gigabyte P67A-D3-B3 |
| Cooling | Thermalright Silver Arrow SB-E Special Edition (with 3x 140mm Black Thermalright fans) |
| Memory | Crucial Ballistix Tactical Tracer 16GB (2x8GB 1600MHz CL8) |
| Video Card(s) | Nvidia GTX TITAN X 12288MB Maxwell @1350MHz |
| Storage | 6TB of Samsung SSDs + 12TB of HDDs |
| Display(s) | LG C1 48 + LG 38UC99 + Samsung S34E790C + BenQ XL2420T + PHILIPS 231C5TJKFU |
| Case | Fractal Design Define R4 Windowed with 6x 140mm Corsair AFs |
| Audio Device(s) | Creative SoundBlaster Z SE + Z906 5.1 speakers/DT 990 PRO |
| Power Supply | Seasonic Focus PX 650W 80+ Platinum |
| Mouse | Logitech G700s |
| Keyboard | CHERRY MX-Board 1.0 Backlit Silent Red Keyboard |
| Software | Windows 7 Pro (RIP) + Winbloat 10 Pro |
| Benchmark Scores | 2fast4u,bro... |
This review NEEDS a Thermalright Silver Arrow SB-E and a NH-D14 thrown into the mix...and definitely a Be Quiet Dark Rock Pro 2 as well, as all of these are the current air cooling champs, beating every single-rad all-in-one watercooling kit, and trading blows with each other, with the difference between them being merely a few degrees here and there, depending on the setup & mounting method.
I had this heatsink for a day, before I replaced it with my Silver Arrow SB-E and I can tell you these have terrible quality control: I found my top fin with the 'Phanteks' logo rattling around on top of the inside of the box, which was not touched on the outside by the courier. It was also this version of the cooler (Black/White) to match my black & windowed Define R4.
I had this heatsink for a day, before I replaced it with my Silver Arrow SB-E and I can tell you these have terrible quality control: I found my top fin with the 'Phanteks' logo rattling around on top of the inside of the box, which was not touched on the outside by the courier. It was also this version of the cooler (Black/White) to match my black & windowed Define R4.
- Joined
- Oct 18, 2007
- Messages
- 1,288 (0.21/day)
| System Name | Firebird |
|---|---|
| Processor | Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK} |
| Motherboard | Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH ! |
| Cooling | Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan |
| Memory | Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth] |
| Video Card(s) | Gigabyte Aurosus 1080Ti |
| Storage | Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA |
| Display(s) | Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV |
| Case | CoolerMaster HAF 932 |
| Audio Device(s) | Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote |
| Power Supply | Seasonic X750 @ 24/7 |
| Mouse | Logictech G300s |
| Keyboard | Saitek Cyborg v7 |
| Software | Windows 7 ROG E3 X64 by Neuropass/tweakscene |
| Benchmark Scores | 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500 |
Well now! Seem's like I may think about replacing the 'ole Ninja Rev.B !!!!
So today I'm ordering the phanteks (black) and I'll let you guys know what the difference is from my 3770K @ 4.7 on a 212+ versus this and then eventually maybe even with upgraded thermalright fans 
I'm still narrowing down my stable voltage but I'm closing in on it, will likely be 1.24v and will keep it that way across both tests.
Here are my current details:
Antec Eleven Hundred Case
CoolerMaster Hyper 212+
3770k at 4.7ghz (1.24v) with stock TIM on the cpu
Temps in prime95: 78-84-79-76, edit: Passed after 12 hours of prime95.
I'll be moving to:
Rosewill Thor V2
Phanteks PH-TC14PE (2 fan stock)
3770k at 4.7ghz (1.24v) with Arctic Silver 5
It will take a few days to get the items, after that I'll be testing the same way but with 3x Thermalright TR TY-143 fans. I've heard good things about using the TY series with this cooler.
Will let you guys know all the results. Bare in mind, it's pretty hot right now in Montreal and I don't have air conditioning. My room temperature is probably like 25C.
Unfortunately it seems like I may only get the Phanteks and Thor V2 by Monday where as the TYR will probably come in tomorrow afternoon. FrozenCPU 1, Newegg 0
I'm still narrowing down my stable voltage but I'm closing in on it, will likely be 1.24v and will keep it that way across both tests.
Here are my current details:
Antec Eleven Hundred Case
CoolerMaster Hyper 212+
3770k at 4.7ghz (1.24v) with stock TIM on the cpu
Temps in prime95: 78-84-79-76, edit: Passed after 12 hours of prime95.
I'll be moving to:
Rosewill Thor V2
Phanteks PH-TC14PE (2 fan stock)
3770k at 4.7ghz (1.24v) with Arctic Silver 5
It will take a few days to get the items, after that I'll be testing the same way but with 3x Thermalright TR TY-143 fans. I've heard good things about using the TY series with this cooler.
Will let you guys know all the results. Bare in mind, it's pretty hot right now in Montreal and I don't have air conditioning. My room temperature is probably like 25C.
Unfortunately it seems like I may only get the Phanteks and Thor V2 by Monday where as the TYR will probably come in tomorrow afternoon. FrozenCPU 1, Newegg 0
Last edited:
Alright so in my previous post I didn't realize but I was running an older prime95. Got the newer one and got much higher temps and needed 1.255v for 4.7ghz (ultra LLC)
Just to give you an update, I have the Phanteks now with 3x TY-143 fans installed.
My old Hyper 212+: 86-93-90-86 on a 12hr prime95
My current Phanteks + TY-143 x3: 77-84-81-77 after 9~ hours of prime95 and also not giving it any time to cure.
I opened another temp monitor about 1 hour 15 mins ago and now it's like 3-5 degrees lower per core during that period. The TIM hasn't cured yet so it may keep getting better. Overall, I'd recommend the Phanteks to anyone, and if you can afford 3x TY-143's to go give it, it's a bonus for sure.
Just to give you an update, I have the Phanteks now with 3x TY-143 fans installed.
My old Hyper 212+: 86-93-90-86 on a 12hr prime95
My current Phanteks + TY-143 x3: 77-84-81-77 after 9~ hours of prime95 and also not giving it any time to cure.
I opened another temp monitor about 1 hour 15 mins ago and now it's like 3-5 degrees lower per core during that period. The TIM hasn't cured yet so it may keep getting better. Overall, I'd recommend the Phanteks to anyone, and if you can afford 3x TY-143's to go give it, it's a bonus for sure.
- Joined
- May 21, 2008
- Messages
- 4,113 (0.71/day)
- Location
- Iowa, USA
| System Name | THE CUBE 2.0 |
|---|---|
| Processor | Intel i5 13600k |
| Motherboard | MSI MPG Z690 EDGE DDR4 |
| Cooling | Phanteks PH-TC14PE BK 2x T30-120 Fan mod mount |
| Memory | G.Skill TridentZ 3200 MT/s C15 32GB 2x16GB |
| Video Card(s) | Gigabyte Aorus 1080 Ti 11GB OC: Core 2GHz, Mem 5.7GHz |
| Storage | WD SN770 250GB / 3x WD SN850X 2TB / Toshiba X300 4TB / 2x RAID1 Toshiba P300 3TB |
| Display(s) | Samsung 49" Odyssey OLED G95SC 240Hz 5120 x 1440 |
| Case | "THE CUBE" Custom built, pure Red Alder wood |
| Audio Device(s) | Beyerdynamic DT 880 |
| Power Supply | Corsair RM1000X |
| Mouse | Logitech G700 |
| Keyboard | Logitech G910 |
| Software | Windows 11 Pro |
Ok I just got done installing my Phanteks PF-TC14PE_BK, Had to completely disassemble my computer to put the mounting bracket on, I must say I like this more than how my Xigy S-1283 fits on.
The only problem I have is that my NZXT Sentry 2(10w per channel...)can start up the 2 fans!? they just barely move from left to right maybe a blades width... So I had to spin them with my finger then they started to spin, so in my testing I don't think they where running 100%(now I have them connected to my MB header and they run 100% They are noisy compared to my Cougar fans.
I got this on sale for about $68
On to the testing all test where done same day and at 25c room temp.
Both used MX-2
Sorry phone pic's, my back fan almost works as a 3rd fan, only about 17mm between them.
The only problem I have is that my NZXT Sentry 2(10w per channel...)can start up the 2 fans!? they just barely move from left to right maybe a blades width... So I had to spin them with my finger then they started to spin, so in my testing I don't think they where running 100%(now I have them connected to my MB header and they run 100% They are noisy compared to my Cougar fans.
I got this on sale for about $68
On to the testing all test where done same day and at 25c room temp.
Both used MX-2
Sorry phone pic's, my back fan almost works as a 3rd fan, only about 17mm between them.
Just to give you all a final update on my build with the phanteks:
3770K delidded, CLP on the die, AS5 on the IHS. (Switching to CLU on both today though, long story)
Cooling: Phanteks + TY-143 x3
Overclock: 5ghz
Offset: 0.27 (my manual was 1.45v)
Ultra LLC (Spikes it up to 1.48v on load, goes down to quite low on idle/etc though)
Temps were maximum: 79-86-88-83 after 12 hours of prime95 with 90% ram usage.
After I fix my chip by cleaning it and using CLU instead, both on the die and IHS, I expect it to be somewhere in the vicinity of: 77-82-83-80, the reason for this is I didn't apply the CLP properly in the first place, and also CLU on the IHS should also give me about 3 degrees difference as well versus my non-cured AS5.
To conclude, the Phanteks can safely OC some 3770K's to 5ghz within safe temps. Before while gaming my temps never broke 61c. It was only under stress testing that it went that high. I won't try to push to 5.1ghz since it would probably take me 1.53v and I'm not comfortable doing a 12hr stress test at 1.53v + Ultra LLC.
If anyone would like some additional information about the Phanteks, the OC or anything like that let me know.