- Joined
- Apr 5, 2005
- Messages
- 6,771 (0.97/day)
- Location
- Republic of Asia (a.k.a Irvine), CA
| System Name | --- |
|---|---|
| Processor | FX 8350 @ 4.00 Ghz with 1.28v |
| Motherboard | Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x |
| Cooling | Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan |
| Memory | Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB |
| Video Card(s) | Asus R9 290 OC @ GPU - 1050, MEM - 1300 |
| Storage | Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games |
| Display(s) | 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23" |
| Case | AeroCool XPredator X3 |
| Audio Device(s) | Built-in Realtek |
| Power Supply | Corsair HX1000 Modular |
| Software | Windows 10 Pro 64 bit |
Here is starting OC results.
Specs:
ECS A770M-A ATX board
Phenom 9500
Ram- 2 x 1GB crucial + 2 x 512MB centon
Video Card - Visiontek 3450
PSU - Antec Trio 430W
CPU cooler - SilenX Direct Contact Heatpipe cooler.
Case - Crappy $10 case
HDD - WD 40GB IDE + 160GB SATA
Only increased the HTT speed to 228 and Voltage set to 1.225 in bios but CPU-Z and HWMonitor shows 1.26, Ram speed set to 333. Every thing else auto. If I lower the HT link to 1.6G no go. So set it to auto.
Any suggestions?
Specs:
ECS A770M-A ATX board
Phenom 9500
Ram- 2 x 1GB crucial + 2 x 512MB centon
Video Card - Visiontek 3450
PSU - Antec Trio 430W
CPU cooler - SilenX Direct Contact Heatpipe cooler.
Case - Crappy $10 case
HDD - WD 40GB IDE + 160GB SATA
Only increased the HTT speed to 228 and Voltage set to 1.225 in bios but CPU-Z and HWMonitor shows 1.26, Ram speed set to 333. Every thing else auto. If I lower the HT link to 1.6G no go. So set it to auto.
Any suggestions?
Attachments
-
9500OC_228HTT.jpg
Last edited: