- Joined
- Aug 11, 2011
- Messages
- 4,355 (0.94/day)
- Location
- Mexico
System Name | Dell-y Driver |
---|---|
Processor | Core i5-10400 |
Motherboard | Asrock H410M-HVS |
Cooling | Intel 95w stock cooler |
Memory | 2x8 A-DATA 2999Mhz DDR4 |
Video Card(s) | UHD 630 |
Storage | 1TB WD Green M.2 - 4TB Seagate Barracuda |
Display(s) | Asus PA248 1920x1200 IPS |
Case | Dell Vostro 270S case |
Audio Device(s) | Onboard |
Power Supply | Dell 220w |
Software | Windows 10 64bit |
First build attempt.
Got a few things wrong in the building order so it looks messier than it should. Took note of the things I'll need (extensions, covers, etc.).
That's a GT430 PCI over the top right corner, I was planning to use it for Physx but the board won't post with two GPUs installed.
The top mesh over the CPU cooler (if you're wondering, that's a CM Geminii) can fit two slim 120mm fans although I guess it's really intended to hold a radiator installed over the case.
Haven't decided what to do with that. I was thinking about putting a pair of CM Turbine Masters over the case as intakes. (might look tacky)
Got a few things wrong in the building order so it looks messier than it should. Took note of the things I'll need (extensions, covers, etc.).
That's a GT430 PCI over the top right corner, I was planning to use it for Physx but the board won't post with two GPUs installed.
The top mesh over the CPU cooler (if you're wondering, that's a CM Geminii) can fit two slim 120mm fans although I guess it's really intended to hold a radiator installed over the case.
Haven't decided what to do with that. I was thinking about putting a pair of CM Turbine Masters over the case as intakes. (might look tacky)