- Joined
- Feb 12, 2007
- Messages
- 1,192 (0.19/day)
- Location
- scotland
| System Name | spuds K8-X2 |
|---|---|
| Processor | amd athlon X2 4200+ toledo s939 2794mhz 254x11 1.4 vcore |
| Motherboard | MSI K8N Neo4-F v1.0 (MS-7125) nforce4 sata2 mod, laptop cpu heatpipe copper nb cooler |
| Cooling | akasa evo "blue" + 90mm fan, 2x120mm front, 250mm side, 120mm rear, 120mm in psu, pci slot exhaust. |
| Memory | OCZ Platinum XTC DDR PC3200 4GB(4x1024) @254mhz 3-3-3-8 2T |
| Video Card(s) | sapphire HD3870 512mb GDDR4 vf900cu, several ramsinks on components / nvidia 7300gt 256mb secondary |
| Storage | hitachi 160gb (slightly fried) / hitachi 120gb ATA / Seagate 160gb / 2x ps3 seagate 60gb |
| Display(s) | CTX EX1300F 20" flat CRT, 1280x1024@100hz / 19" benq FP91G X / 19" hanns-g (all free) |
| Case | mesh server/gaming black case, 9x 5.25' drive bays, silvestone auto fan controller |
| Audio Device(s) | onboard realtek alc850 7.1/soundblaster LIVE! ct4780 + kxaudio - sony home theatre surround |
| Power Supply | winpower 650w, system draws around 470-500w under load(+all screens) |
| Software | win7 64bit |
| Benchmark Scores | ~16m trips/sec using mty trip generator. triple monitor gaming using SoftTH. 3840x1024 |
has anyone done any to there system? been looking around the net and found a few, but the ones i was most intrested in were dead links, and others were conflicting,
apparently i can make my celeron operate at a 133(533)fsb instead of 100(400)fsb, by isolating one of the bsel pins, but what one? dont wanna snap off the wrong one lol,
at the moment iv connected AD6(BSEL[0]) to AD7(VCC), that made it run at 100fsb with the ram running same speed instead of being on a divider, where i read this it said its for 133 fsb, so not too sure if it was meant for this cpu, any help/advice on this much appreciated.
apparently i can make my celeron operate at a 133(533)fsb instead of 100(400)fsb, by isolating one of the bsel pins, but what one? dont wanna snap off the wrong one lol,
at the moment iv connected AD6(BSEL[0]) to AD7(VCC), that made it run at 100fsb with the ram running same speed instead of being on a divider, where i read this it said its for 133 fsb, so not too sure if it was meant for this cpu, any help/advice on this much appreciated.
AMD celeron ???
