First of all, HELLO.
I've been lurking around here for a week and been reading many threads about the best settings for 8750H and ThrottleStop.
Here's what's happening with me:
- I have an MSI Ge63 Raider 8RE @2.2 GHZ and GTX 1060 with hyperthreading on in BIOS.
- When I use the balanced power settings with the slider all the way to the right (Best performance), i get temperatures around the high 70-80s BUT with constant flashing red 95+ peaks in HWMonitor. When i mean by flashing is that the red peaks come and go during gameplay. This is what concerned me and made me look into ThrottleStop.
Now with Throttlestop:
- Setting 1: I started by lowering both the CPU and Cache offsets to -125, disabled PD Prochot, Speedshift EPP at 0 with windows power slider back to middle, set speed shift min/max value according what it showed (min 8, Max 41). Still getting peaks.
- Setting 2: Lowered turbo limits to 34, offsets both to -125, disabled PD Prochot, Speedshit EPP at 0 with windows power slider to middle, Speed shift values min 8 max 34, set Long power PL1 to 38, Short Power PL2 to 79. Good results with no warnings in limit reasons. Temperatures mainly in 70s and sometimes reaching 80.
- Setting 3: Same as setting 2 BUT i set both PL1 and PL2 to 24. Now with this setting i'm getting the absolute best temperatures (low 60s) BUT i'm getting occasional "power" warning in ThrottleStop when gaming and obviously constant "power" warning in TS bench.
My question is: Which setting should i use? Any more tips?
The bigger question is: Do i really need throttleStop since the red peaks are only "occasional" ?
Thank you so much!
I've been lurking around here for a week and been reading many threads about the best settings for 8750H and ThrottleStop.
Here's what's happening with me:
- I have an MSI Ge63 Raider 8RE @2.2 GHZ and GTX 1060 with hyperthreading on in BIOS.
- When I use the balanced power settings with the slider all the way to the right (Best performance), i get temperatures around the high 70-80s BUT with constant flashing red 95+ peaks in HWMonitor. When i mean by flashing is that the red peaks come and go during gameplay. This is what concerned me and made me look into ThrottleStop.
Now with Throttlestop:
- Setting 1: I started by lowering both the CPU and Cache offsets to -125, disabled PD Prochot, Speedshift EPP at 0 with windows power slider back to middle, set speed shift min/max value according what it showed (min 8, Max 41). Still getting peaks.
- Setting 2: Lowered turbo limits to 34, offsets both to -125, disabled PD Prochot, Speedshit EPP at 0 with windows power slider to middle, Speed shift values min 8 max 34, set Long power PL1 to 38, Short Power PL2 to 79. Good results with no warnings in limit reasons. Temperatures mainly in 70s and sometimes reaching 80.
- Setting 3: Same as setting 2 BUT i set both PL1 and PL2 to 24. Now with this setting i'm getting the absolute best temperatures (low 60s) BUT i'm getting occasional "power" warning in ThrottleStop when gaming and obviously constant "power" warning in TS bench.
My question is: Which setting should i use? Any more tips?
The bigger question is: Do i really need throttleStop since the red peaks are only "occasional" ?
Thank you so much!