KILLER_K
New Member
- Joined
- Apr 25, 2007
- Messages
- 94 (0.02/day)
Processor | Q6600 |
---|---|
Motherboard | Asus P5K vanilla |
Cooling | Zalman 9500 |
Memory | Corsair Dominator pc8500 2 x 2gig |
Video Card(s) | Evga 8800gt |
Storage | 500gig Western Digital 16meg cache sata |
Display(s) | Samsung SyncMaster 213T |
Case | Antec p182 |
Audio Device(s) | Realtek HD onboard |
Power Supply | Hiper 580 watt module |
Software | Vista Ultimate 64bit |
Okay i bought this card from someone to replace my 8800gt. He had manually changed the bios with that rbe app . So he did the clocks from 750/900 to 800/950 and turned the fan to 100% 24-7.
Now i want to remove the fan from 100% and change it back to stock 750/900. So i tried atiwinflash and get a "SubsystemID's Mismatch" error with that. There was two bios on this site for the 750/900 i tried both, same results.
Next downloaded atiflash and booted into dos. First thisng i get when i run atiflash -i is "Exiting do to signal" and that is it. So just what the heck do i need to do at this point to restore this thing to the factory specs. As the fan is so loud i can't think at 100%.
Good Day
Now i want to remove the fan from 100% and change it back to stock 750/900. So i tried atiwinflash and get a "SubsystemID's Mismatch" error with that. There was two bios on this site for the 750/900 i tried both, same results.
Next downloaded atiflash and booted into dos. First thisng i get when i run atiflash -i is "Exiting do to signal" and that is it. So just what the heck do i need to do at this point to restore this thing to the factory specs. As the fan is so loud i can't think at 100%.
Good Day