- Joined
- Aug 12, 2005
- Messages
- 754 (0.11/day)
Processor | Intel Core i7 4790K |
---|---|
Motherboard | Asus Z97i Plus |
Cooling | Antec Kuhler 620 + Gentle Typhoon 3000RPM |
Memory | A-DATA XPG V2 DDR3-2400 16GB |
Video Card(s) | MSI GTX 970 Gaming 4G |
Storage | Samsung 850 Ev0 500GB |
Display(s) | Qnix QX2710 @100Hz |
Case | Silverstone SG13 |
Audio Device(s) | Onboard |
Power Supply | Silverstone SX-500LG |
Mouse | Logitech G602 |
Keyboard | Corsair K70 Lux |
Software | Windows 10 Pro |
Benchmark Scores | Not interested in benchmarks |
Hi,
At work, when I copy few files from my Sandybridge PC (i7 2600) to another Sandybridge server (i5 2400), i get a problem.
The file copying will stop in the middle. Stop means, no error or anything, but the progressbar in Windows 7 file copying dialog will get stuck. The animation as if something is going on is still there, but there is no progress. When I try to cancel it, it tries to cancel for hours and hours without getting it done. This doesn't happen when I copy a single file. Only when I copy few files, doesn't have to be large; a few MBs.
When this happens, the PC would not turn off. I have to hold the power button till power goes off and then turn back ON. It's insane!
There is no problem when I try to copy the same data from my other PC (an AthlonX2) to the same server.
BTW, this is one of those pre-B3 motherboards. It has the SATA problem, but AFAIK the hard drive is plugged into the SATA3 port. (Should check this)
Everything is OK when I copy data FROM the server TO the PC.
HDD is a WD Caviar Blue 500GB, Mobo is an ECS H67 board. (Cannot recall the model)
Server has two Caviar Blues in RAID-1. But it is not a problem with the server as nobody else has this problem. But only I have a Sandybridge.
What could be the problem? Intel IST driver? Something wrong with Windows? (happens in both 32bit, 64bit Ultimate (corp license) and 64bit HP which came by default with the PC) Sandybridge SATA issue?
Few things I should try.
1. Try updating the drivers, specifically LAN driver and Intel RST driver
2. Update mobo BIOS (but I prefer not to do this)
3. Use Teracopy
any other thoughts?
At work, when I copy few files from my Sandybridge PC (i7 2600) to another Sandybridge server (i5 2400), i get a problem.
The file copying will stop in the middle. Stop means, no error or anything, but the progressbar in Windows 7 file copying dialog will get stuck. The animation as if something is going on is still there, but there is no progress. When I try to cancel it, it tries to cancel for hours and hours without getting it done. This doesn't happen when I copy a single file. Only when I copy few files, doesn't have to be large; a few MBs.
When this happens, the PC would not turn off. I have to hold the power button till power goes off and then turn back ON. It's insane!
There is no problem when I try to copy the same data from my other PC (an AthlonX2) to the same server.
BTW, this is one of those pre-B3 motherboards. It has the SATA problem, but AFAIK the hard drive is plugged into the SATA3 port. (Should check this)
Everything is OK when I copy data FROM the server TO the PC.
HDD is a WD Caviar Blue 500GB, Mobo is an ECS H67 board. (Cannot recall the model)
Server has two Caviar Blues in RAID-1. But it is not a problem with the server as nobody else has this problem. But only I have a Sandybridge.
What could be the problem? Intel IST driver? Something wrong with Windows? (happens in both 32bit, 64bit Ultimate (corp license) and 64bit HP which came by default with the PC) Sandybridge SATA issue?
Few things I should try.
1. Try updating the drivers, specifically LAN driver and Intel RST driver
2. Update mobo BIOS (but I prefer not to do this)
3. Use Teracopy
any other thoughts?