- Joined
- Apr 2, 2007
- Messages
- 2,817 (0.45/day)
- Location
- US
Processor | Intel Q9400 |
---|---|
Motherboard | asus p5q-pro |
Cooling | Ultra120 |
Memory | 6GB ddr2 |
Video Card(s) | NVS 290 |
Storage | 3TB + 1.5TB |
Display(s) | Samsung F2380 |
Case | Silverstone Fortress FT02B |
Audio Device(s) | Creative X-Fi |
Power Supply | 750W PC P&C |
Software | win 7 ultimate 64bit |
Ok, today i got my new 2x1GB cas4
I just added them to my 2x512, with Auto in Bios they rum at cas4 533mhz
then I tried to run all 4 at 667mhz. everything was fine.
Then I set them at 800mhz, but WinXP started getting a blue screen of death at boot, but Win2003 was fine (except 3dmark kept closing for no reason)
So I took my 2x512 out and now WInXP says that ntoskrnl.exe is either missing or corrupt (but Win2003 works without a single problem, runs benches, games...), I had a back up, so first i tried to replace the file, but nothing, then I installed a new WinXP over the old one, it worked, but I was lazy to reinstall all the drivers again, so I took the back up image and installed it over my working windows and guess what? the problem came back!
never thought upgrading ram could be that painful, please help
I just added them to my 2x512, with Auto in Bios they rum at cas4 533mhz
then I tried to run all 4 at 667mhz. everything was fine.
Then I set them at 800mhz, but WinXP started getting a blue screen of death at boot, but Win2003 was fine (except 3dmark kept closing for no reason)
So I took my 2x512 out and now WInXP says that ntoskrnl.exe is either missing or corrupt (but Win2003 works without a single problem, runs benches, games...), I had a back up, so first i tried to replace the file, but nothing, then I installed a new WinXP over the old one, it worked, but I was lazy to reinstall all the drivers again, so I took the back up image and installed it over my working windows and guess what? the problem came back!
never thought upgrading ram could be that painful, please help
Last edited: