• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Project "Shielding War" Mathmodding

Joined
Jul 24, 2013
Messages
151 (0.04/day)
sabertooth receive ;)





 

Random Murderer

The Anti-Midas
Joined
Dec 6, 2006
Messages
6,974 (1.10/day)
Location
Florida, A.K.A. the Sweatbox
System Name TOO MUCH RADIATOR! | The TV Box a.k.a. The Shoebox
Processor Core i7 4930K @ 4.5GHz | Core i5 6600K @ 4.5GHz
Motherboard Asus X79 Rampage IV Extreme | Asus Z170i Pro Gaming
Cooling Custom water on CPU and GPU, dual 360mm radiators | Corsair H80i
Memory 4x 8GB G.Skill TridentX DDR3-1600 | 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s) Sapphire AMD R9 295x2 | PowerColor AMD HD7970
Storage Samsung SSD 830 256GB, various others | 2x 1TB Seagate Barracudas in RAID1
Display(s) Dell U2713HM 2560x1440 IPS | Panasonic TC-L32E5 1080p IPS TV
Case Thermaltake Suppressor F51 (stripped down to hold two radiators) | Cooler Master Elite 130
Audio Device(s) RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 | HDMI sound device on 7970
Power Supply LEPA G1600-MA 1600W | Corsair CX750M 750W
Software Win 10 64
Benchmark Scores over 9000 BungholioMarks, "Bitchin' Fast"
Joined
Aug 17, 2009
Messages
1,585 (0.30/day)
Location
Los Angeles/Orange County CA
System Name Vulcan
Processor i6 6600K
Motherboard GIGABYTE Z170X UD3
Cooling Thermaltake Frio Silent 14
Memory 16GB Corsair Vengeance LPX 16GB (2 x 8GB)
Video Card(s) ASUS Strix GTX 970
Storage Mushkin Enhanced Reactor 1TB SSD
Display(s) QNIX 27 Inch 1440p
Case Fractal Design Define S
Audio Device(s) On Board
Power Supply Cooler Master V750
Software Win 10 64-bit
thanks for all the cool pictures. nice mod so far.
 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
A nod to be quiet! accompanying me on this mod with their Silent Wings 2 and sound insulation kit.

The installation and the following:

The EK rad and ventilated with a Push / Pull Silent Wings PWM 2 will be connected on all four 4pin CPU socket alone with a EKWB cable 4pin PWM to 4x 4pin PWM with a molex plug to provide power and not gun down the motherboard.
It will therefore be controlled all at the same time by the CM according to the CPU temp Who with this watercooling system with 2 240 rad this vera OC to 4.5GHz (Core i5 2500K) in a first time.

All that portion of the case who contain the rad Push / Pull will be insulated with sound kit history of confining some noise cause by 4 Silent Wings2.

There will be two other Silent Wings 2 (standard) those there on the top of the box in the 2nd extraction Rad 240 (not visible in the photos)

Un petit clin d’œil à be quiet! qui m’accompagne sur ce mod avec leur Silent Wings 2 et un kit d'isolation phonique.

Le montage et le suivant:

Le rad EK et ventilé grâce à un Pull/Push de Silent Wings 2 PWM qui seront connectés tout les 4 sur la seul prise 4pin CPU grâce à un câble EKWB 4pin PWM vers 4x 4pin PWM avec une prise molex pour assurer l'alimentation et ne pas flinguer la carte mère.
Il seront donc piloté tous en même temps par la CM en fonction de la temp du CPU Qui avec ce système de watercooling avec 2 rad de 240 ce vera OC à 4.5ghz (core I5 2500K) dans un 1er temps.

Toute la partie du boitier qui contiens le rad en Pull/Push sera isolé avec le kit phonique histoire de confiner le peu de bruit engendrer par 4 Silent Wings2.

Il y aura 2 autres Silent Wings 2 (standard) ceux là sur le haut du boitier en extraction du 2eme Rad de 240 (non visible sur les photos)







 
Joined
Dec 23, 2012
Messages
1,704 (0.41/day)
Location
Somewhere Over There!
System Name Gen2
Processor Ryzen R9 5950X
Motherboard Asus ROG Crosshair Viii Hero Wifi
Cooling Lian Li 360 Galahad
Memory G.Skill Trident Z RGB 64gb @ 3600 Mhz CL14-13-13-24 1T @ 1.45V
Video Card(s) Sapphire RX 6900 XT Nitro+
Storage Seagate 520 1TB + Samsung 970 Evo Plus 1TB + lots of HDD's
Display(s) Samsung Odyssey G7
Case Lian Li PC-O11D XL White
Audio Device(s) Onboard
Power Supply Super Flower Leadex SE Platinum 1000W
Mouse Xenics Titan GX Air Wireless
Keyboard Kemove Snowfox 61
Software Main: Gentoo+Arch + Windows 11
Benchmark Scores Have tried but can't beat the leaders :)
wow looks good....
 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
Go on ahead. I just realized the bulkhead between the motherboard and the rad Push / Pull plexi
Aller, on avance. Je viens de réalisé la cloison entre la carte mère et le rad Pull/Push en plexi

 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
Après plusieurs essais de ponçage, peinture ect.... voilà l'état de surface que j’obtiens pour mon blindage.






 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
Not to mention real sponsorship, ASUS France just send me stikers "TUF inside" I wanted for my mod and are related to my motherboard Sabertooth Z77.
Thank you ASUS and its range "TUF" - with ASUS France

Sans parler de vrai sponsoring, ASUS France viens de m'envoyer les stikers "TUF inside" que je voulais pour mon mod et qui sont en rapport avec ma carte mère Sabertooth Z77.
Merci ASUS et sa gamme "TUF" — avec ASUS France.



The good news continues

I receive from a 16GB Crucial Memory Kit PC3-14900 Ballistix Elite in 9 cases that go much better with the theme of my mod and above in accordance with my new motherboard sabertooth card.

Les bonne nouvelles continue,

je vais recevoir de la part de Crucial Memory un kit 16GO de PC3-14900 en Ballistix ELITE cas 9 qui ira beaucoup mieux avec le thème de mon mod et surtout en accord avec ma nouvelle carte mère sabertooth.




That will be perfectly at home in my mod
Voilà qui sera parfaitement à sa place dans mon mod

 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
I looked for a way to compensate for the thickness of shielding for 5mm screws doors of the case Antec LanBoy Air which suddenly no longer going for a few days.

Ba's it! I simply used the old support small motherboard brass

Je cherché depuis quelques jours le moyen de compenser l'épaisseur du blindage de 5mm pour les vis de fixation des portes du boitier Antec LanBoy Air qui du coup, n'allait plus.

Ba ça y est! J'ai simplement utilisé des anciens petits support de carte-mère en laiton

math!
 

Random Murderer

The Anti-Midas
Joined
Dec 6, 2006
Messages
6,974 (1.10/day)
Location
Florida, A.K.A. the Sweatbox
System Name TOO MUCH RADIATOR! | The TV Box a.k.a. The Shoebox
Processor Core i7 4930K @ 4.5GHz | Core i5 6600K @ 4.5GHz
Motherboard Asus X79 Rampage IV Extreme | Asus Z170i Pro Gaming
Cooling Custom water on CPU and GPU, dual 360mm radiators | Corsair H80i
Memory 4x 8GB G.Skill TridentX DDR3-1600 | 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s) Sapphire AMD R9 295x2 | PowerColor AMD HD7970
Storage Samsung SSD 830 256GB, various others | 2x 1TB Seagate Barracudas in RAID1
Display(s) Dell U2713HM 2560x1440 IPS | Panasonic TC-L32E5 1080p IPS TV
Case Thermaltake Suppressor F51 (stripped down to hold two radiators) | Cooler Master Elite 130
Audio Device(s) RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 | HDMI sound device on 7970
Power Supply LEPA G1600-MA 1600W | Corsair CX750M 750W
Software Win 10 64
Benchmark Scores over 9000 BungholioMarks, "Bitchin' Fast"

Random Murderer

The Anti-Midas
Joined
Dec 6, 2006
Messages
6,974 (1.10/day)
Location
Florida, A.K.A. the Sweatbox
System Name TOO MUCH RADIATOR! | The TV Box a.k.a. The Shoebox
Processor Core i7 4930K @ 4.5GHz | Core i5 6600K @ 4.5GHz
Motherboard Asus X79 Rampage IV Extreme | Asus Z170i Pro Gaming
Cooling Custom water on CPU and GPU, dual 360mm radiators | Corsair H80i
Memory 4x 8GB G.Skill TridentX DDR3-1600 | 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s) Sapphire AMD R9 295x2 | PowerColor AMD HD7970
Storage Samsung SSD 830 256GB, various others | 2x 1TB Seagate Barracudas in RAID1
Display(s) Dell U2713HM 2560x1440 IPS | Panasonic TC-L32E5 1080p IPS TV
Case Thermaltake Suppressor F51 (stripped down to hold two radiators) | Cooler Master Elite 130
Audio Device(s) RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 | HDMI sound device on 7970
Power Supply LEPA G1600-MA 1600W | Corsair CX750M 750W
Software Win 10 64
Benchmark Scores over 9000 BungholioMarks, "Bitchin' Fast"
Sorry for my bad english, j'm french:p

It's not bad English. I was just chiming in with an Adventure Time reference.
Finn says "Math!" and "Mathematical!" as well.
 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
In connection with the ASUS sabertooth
and as my mod brings a kind of armor case Antec LanBoy Air in the same style as the Thermal Armor of CM, I decided to link the two.

I personally hearts, is what is most important, but I hope that you also love gone;-)
Math!

En rapport avec la carte mère ASUS sabertooth,
et comme mon mod apporte une sorte d'armure au boitier Antec LanBoy Air dans le même style que la thermal Armor de la CM, j'ai décidé de lier les deux.

Perso je kiff, est c'est bien le plus important, mais j’espère que vous aussi vous allé aimer ;-)
Math!





 
Joined
Aug 17, 2009
Messages
1,585 (0.30/day)
Location
Los Angeles/Orange County CA
System Name Vulcan
Processor i6 6600K
Motherboard GIGABYTE Z170X UD3
Cooling Thermaltake Frio Silent 14
Memory 16GB Corsair Vengeance LPX 16GB (2 x 8GB)
Video Card(s) ASUS Strix GTX 970
Storage Mushkin Enhanced Reactor 1TB SSD
Display(s) QNIX 27 Inch 1440p
Case Fractal Design Define S
Audio Device(s) On Board
Power Supply Cooler Master V750
Software Win 10 64-bit
Yes I love it! Very nice job.

Shows lots of possibilities with this case.
 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
Yes I love it! Very nice job.

Shows lots of possibilities with this case.
Tanks:toast:

Go, it continues! This is the cable box cut cache.

This is to create a plate in the extension of the motherboard to hide the cables that will be there

I still have the cable bushings for drilling, and sanding / painting!



Aller, on continue! Voilà le cache câble du boitier coupé.

Il s'agit là de créer une plaque dans le prolongement de la carte-mère pour cacher la câblerie qui s'y trouvera

Il me reste les passages de câble à percer, et le ponçage/peinture!


 
Last edited:
Joined
Jul 24, 2013
Messages
151 (0.04/day)
That's what I did today!

M4-thread in all the fasteners on the front and top are now in place.

-Implementation of 2 Silent Wings extraction on top of boital.

-Establishment of support on the SSD partition carte-mère/Watercooling.

Start-cable management.


Voilà ce que j'ai fait aujourd'hui!

-Taraudage en M4 de toutes les fixations de la face avant et supérieur qui sont maintenant en place.

-Mise en place des 2 Silent Wings en extraction sur le haut du boital.

-Mise en place du support de SSD sur la cloison carte-mère/Watercooling.

-Début du câble management.












 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
This is the location of the rear fan and the outer shield turned over!

You can see on the inside face that I added the PC noise absorber KIT be quiet!

Voilà l'emplacement du ventilo arrière viré et le blindage extérieur fini!

Vous pouvez voir sur la face intérieur que j'ai rajouté de l'isolant phonique be quiet!







 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
Here is finally the case Antec LanBoy Air revised and corrected by me.

I think I got the record that I wanted (solid, imposing, indestructible shield) while the housing base and quite the opposite!

Some finishing touches and will augment those documents but does not change the look you see today.

Math!
ps: the final cut coming soon;-)




Voilà enfin le boitier Antec LanBoy Air revu et corrigé par mes soins.

Je pense avoir obtenu le rendu que je voulais ( massif, imposant, indestructible, blindé) alors que le boitier de base et tout l'inverse!

Quelques petites touches de finitions viendront s'y greffer mais ne changeront pas l'aspect que vous voyez aujourd'hui.

Math!
ps: le montage final arrive bientôt ;-)









 
Joined
Jul 24, 2013
Messages
151 (0.04/day)
New sponsor! INTEL

Nouveau sponsor! INTEL


un I7 3770K va donc venir ce greffer sur mon mod :izvd:

Thanks intel:cool:
 
Top